U.S. Department of Transportation
Federal Highway Administration
1200 New Jersey Avenue, SE
Washington, DC 20590
202-366-4000


Skip to content U.S. Department of Transportation/Federal Highway AdministrationU.S. Department of Transportation/Federal Highway Administration

Bridges & Structures

FRP Library

ACI Structural Journal FRP References

  1. Abdelrahman, A.A., and Rizkalla, S.H. (1997). "Serviceability of Concrete Beams Prestressed by Carbon-Fiber-Reinforced-Plastic Bars," ACI Structural Journal Vol. 94, No. 4, pp. 447-457.
  2. Al-Sulaimani, G.J., Sharif, A., Basunbul, I.A., Baluch, M.H., and Ghaleb, B.N. (1994). "Shear Repair for Reinforced Concrete by Fiberglas Plate Bonding," ACI Structural Journal Vol. 91 No. 4, pp 458-464.
  3. Antoniades, K.K., Salonikios, T.N., and Kappos, A.J. (2003). "Cyclic Tests on Seismically Damaged Reinforced Concrete Walls Strengthened Using Fiber-Reinforced Polymer Reinforcement," ACI Structural Journal Vol. 100, No. 4, pp. 510-518.
  4. Arduini, M., Tommaso, A.D., and Nanni, A. (1997). "Brittle Failure in FRP Plate and Sheet Bonded Beams," ACI Structural Journal Vol. 94, No. 4, pp. 363-370.
  5. Arduini, M., and Nanni, A. (1997). "Parametric Study of Beams with Externally Bonded FRP Reinforcement," ACI Structural Journal Vol. 94, No. 5, pp. 493-501.
  6. Arduini, M., Nanni, A., and Romagnolo, M. (2002). "Performance of Decommissioned Reinforced Concrete Girders Strengthened with Fiber-Reinforced Polymer Laminates," ACI Structural Journal Vol. 99, No. 5, pp. 652-659.
  7. Arduini, M., Nanni, A., and Romagnolo, M. (2004). "Performance of One-Way Reinforced Concrete Slabs with Externally Bonded Fiber-Reinforced Polymer Strengthening," ACI Structural Journal Vol. 101, No. 2, pp. 193-201.
  8. Bank, L.C., Frostig, Y., and Shapira, A. (1997). "Three-Dimensional Fiber-Reinforced Plastic Grating Cages for Concrete Beams: a Pilot Study," ACI Structural Journal Vol. 94, No. 6, pp. 643-652.
  9. Bencardino, F., Spadea, G., and Swamy, R.N. (2002). "Strength and Ductility of Reinforced Concrete Beams Externally Reinforced with Carbon Fiber Fabric," ACI Structural Journal Vol. 99, No. 2, pp. 163-171.
  10. Benmokrane, B., Chaallal, O., and Masmoudi, R. (1996). "Flexural Response of Concrete Beams Reinforced with FRP Reinforcing Bars," ACI Structural Journal Vol. 93 No. 1, pp 46-55.
  11. Bisby, L.A., and Green, M.F. (2002). "Resistance to Freezing and Thawing of Fiber-Reinforced Polymer-Concrete Bond," ACI Structural Journal Vol. 99, No. 2, pp. 215-223.
  12. Bonacci, J.F., and Maalej, M. (2000). "Externally Bonded Fiber-Reinforced Polymer for Rehabilitation of Corrosion Damaged Concrete Beams," ACI Structural Journal Vol. 97, No. 5, pp 703-711.
  13. Bousselham, A., and Chaallal, O. (2004). "Shear Strengthening Reinforced Concrete Beams with Fiber-Reinforced Polymer: Assessment of Influencing Parameters and Required Research," ACI Structural Journal Vol. 101, No. 2, pp. 219-227.
  14. Breña, S.F., Bramblett, R.M., Wood, S.L., and Kreger, M.E. (2003). "Increasing Flexural Capacity of Reinforced Concrete Beams Using Carbon Fiber-Reinforced Polymer Composites," ACI Structural Journal Vol. 100, No. 1, pp. 36-46.
  15. Breña, S.F., Wood, S.L., and Kreger, M.E. (2003). "Full-Scale Tests of Bridge Components Strengthened Using Carbon Fiber-Reinforced Polymer Composites," ACI Structural Journal Vol. 100, No. 6, pp. 775-784.
  16. Burgueño, R., Davol, A., Zhao, L. Seible, F., and Karbhari, V.M. (2004). "Flexural Behavior of Hybrid Fiber-Reinforced Polymer/Concrete Beam/Slab Bridge Component," ACI Structural Journal Vol. 101, No. 2, pp. 228-236.
  17. Chajes, M.J., Januszka, T.F., Mertz, D.R., Thomson Jr., T.A., and Finch Jr., W.W. (1995). "Shear Strengthening of Reinforced Concrete Beams Using Externally Applied Composite Fabrics," ACI Structural Journal Vol. 92 No. 3, pp 295-303.
  18. Chajes, M.J., Finch Jr., W.W., Januszka, T.F., and Thomson Jr., T.A. (1996). "Bond and Force Transfer of Composite Material Plates Bonded to Concrete," ACI Structural Journal Vol. 93 No. 2, pp 208-217.
  19. Chaallal, O., and Shahawy, M. (2000). "Performance of Fiber-Reinforced Polymer-Wrapped Reinforced Concrete Column under Combined Axial-Flexural Loading," ACI Structural Journal Vol. 97, No. 4, pp 659-668.
  20. Chaallal, O., Shahawy, M., and Hassan, M. (2002). "Performance of Reinforced Concrete T-Girders Strengthened in Shear with Carbon Fiber-Reinforced Polymer Fabric," ACI Structural Journal Vol. 99, No. 3, pp. 335-343.
  21. Chaallal, O., Hassan, M., and Shahawy, M. (2003). "Confinement Model for Axially Loaded Short Rectangular Columns Strengthened with Fiber-Reinforced Polymer Wrapping," ACI Structural Journal Vol. 100, No. 2, pp. 215-221.
  22. Charkas, H., Rasheed, H.A., and Melhem, H. (2003). "Rigorous Procedure for Calculating Deflections of Fiber-Reinforced Polymer-Strengthened Reinforced Concrete Beams," ACI Structural Journal Vol. 100, No. 4, pp. 529-539.
  23. De Lorenzis, L., and Naani, A. (2001). "Shear Strengthening of Reinforced Concrete Beams with Near-Surfaced Mounted Fiber-Reinforced Polymer Rods," ACI Structural Journal Vol. 98 No. 1, pp 60-68.
  24. De Lorenzis, L., and Nanni, A. (2002). "Bond Between Near-Surface Mounted Fiber-Reinforced Polymer Rods and Concrete in Structural Strengthening," ACI Structural Journal Vol. 99, No. 2, pp. 123-132.
  25. De Lorenzis, L., Lundgren, K., and Rizzo, A. (2004). "Anchorage Length of Near-Surface Mounted Fiber-Reinforced Polymer Rods for Concrete Strengthening - Experimental Investigation and Numerical Modeling," ACI Structural Journal Vol. 101, No. 2, pp. 269-278.
  26. De Lorenzis, L. (2004). "Anchorage Length of Near-Surface Mounted Fiber-Reinforced Polymer Rods for Concrete Strengthening - Analytical Modeling," ACI Structural Journal Vol. 101, No. 3, pp. 375-386.
  27. Deniaud, C., and Cheng, J.J.R. (2001). "Shear Behavior of Reinforced Concrete T-Beams with Externally Bonded Fiber-Reinforced Polymer Sheets," ACI Structural Journal Vol. 98, No. 3, pp. 386-394.
  28. Domenico, N.G., Mahmoud, Z.I., and Rizkalla, S.H. (1998). "Bond Properties of Carbon Fiber Composite Prestressing Strands," ACI Structural Journal Vol. 95, No. 3, pp. 281-290.
  29. Eddie, D., Shalaby, A., Rizkalla, S. (2001). "Glass Fiber-Reinforced Polymer Dowels for Concrete Pavements," ACI Structural Journal Vol. 98, No. 2, pp. 201-206.
  30. El-Hacha, R., Wight, R.G., and Green, M.F. (2003). "Innovative System for Prestressing Fiber-Reinforced Polymer Sheets," ACI Structural Journal Vol. 100, No. 3, pp. 305-313.
  31. El-Mihilmy, M.T., and Tedesco, J.W. (2000). "Deflection of Reinforced Concrete Beams Strengthened with Fiber-Reinforced Polymer (FRP) Plates," ACI Structural Journal Vol. 97, No. 5, pp 679-688.
  32. El-Mihilmy, M.T., and Tedesco, J.W. (2001). "Prediction of Anchorage Failure for Reinforced Concrete Beams Strengthened with Fiber-Reinforced Polymer Plates," ACI Structural Journal Vol. 98, No. 3, pp. 301-314.
  33. El-Refaie, S.A., Ashour, A.F., and Garrity, S.W. (2003). "Sagging and Hogging Strengthening of Continuous Reinforced Concrete Beams Using Carbon Fiber-Reinforced Polymer Sheets," ACI Structural Journal Vol. 100, No. 4, pp. 446-453.
  34. El-Salakawy, E., Benmokrane, B., Masmoudi, R., Brière, F., and Breaumier, E. (2003). "Concrete Bridge Barriers Reinforced with Glass Fiber-Reinforced Polymer Composite Bars," ACI Structural Journal Vol. 100, No. 6, pp. 815-824.
  35. El-Tawil, S., and Okeil, A.M. (2002). "LRFD Flexural Provisions for Prestressed Concrete Bridge Girders Strengthened with Carbon Fiber-Reinforced Polymer Laminates," ACI Structural Journal Vol. 99, No. 2, pp. 181-190.
  36. Fam, A.Z., Rizkalla, S.H., and Tadros, G. (1997). "Behavior of CFRP for Prestressing and Shear Reinforcements of Concrete Highway Bridges," ACI Structural Journal Vol. 94, No. 1, pp. 77-86.
  37. Fam, A.Z., and Rizkalla, S.H. (2001). "Behavior of Axially Loaded Concrete-Filled Circular Fiber-Reinforced Polymer Tubes," ACI Structural Journal Vol. 98, No. 3, pp. 280-289.
  38. Fam, A.Z., and Rizkalla, S.H. (2001). "Confinement Model for Axially Loaded Concrete Confined by Circular Fiber-Reinforced Polymer Tubes," ACI Structural Journal Vol. 98, No. 4, pp. 451-461.
  39. Fam, A., Flisak, B., and Rizkalla, S. (2003). "Experimental and Analytical Modeling of Concrete-Filled Fiber-Reinforced Polymer Tubes Subjected to Combined Bending and Axial Loads," ACI Structural Journal Vol. 100, No. 4, pp. 499-509.
  40. Fischer, G., and Li, V.C. (2003). "Deformation Behavior of Fiber-Reinforced Polymer Reinforced Engineered Cementitious Composite (ECC) Flexural Members under Reversed Cyclic Loading Conditions," ACI Structural Journal Vol. 100, No. 1, pp. 25-35.
  41. Fischer, G., and Li, V.C. (2003). "Intrinsic Response Control of Moment-Resisting Frames Utilizing Advanced Composite Materials and Structural Elements," ACI Structural Journal Vol. 100, No. 2, pp. 166-176.
  42. Grace, N.F., Sayed, G.A., Soliman, A. K., and Saleh, K. R. (1999). "Strengthening Reinforced Concrete Beams Using Fiber Reinforced Polymer (FRP) Laminates," ACI Structural Journal Vol. 96, No. 5, pp 865-874.
  43. Grace, N.F., Abdel-Sayed, G., Wahba, J., and Sakla, S. (1999). "Mathematical Solution for Carbon Fiber-Reinforced Polymer Prestressed Concrete Skew Bridges," ACI Structural Journal Vol. 96, No. 6, pp 981-987.
  44. Grace, N.F., and Abdel-Sayed, G. (2000). "Behavior of Carbon Fiber-Reinforced Prestressed Concrete Skew Bridges," ACI Structural Journal Vol. 97, No. 1, pp 26-34.
  45. Grace, N.B. (2001). "Strengthening of Negative Moment Region of Reinforced Concrete Beams Using Carbon Fiber-Reinforced Polymer Strips," ACI Structural Journal Vol. 98, No. 3, pp. 347-358.
  46. Grace, N.F., Abdel-Sayed, G., and Rajheb, W.F. (2002). "Strengthening of Concrete Beams Using Innovative Ductile Fiber-Reinforced Polymer Fabric," ACI Structural Journal Vol. 99, No. 5, pp. 692-700.
  47. Grace, N.F., and Singh, S.B. (2003). "Design Approach for Carbon Fiber-Reinforced Polymer Prestressed Concrete Bridge Beams," ACI Structural Journal Vol. 100, No. 3, pp. 365-376.
  48. Grace, N.F., Ragheb, W.F., and Abdel-Sayed, G. (2003). "Flexural and Shear Strengthening of Concrete Beams Using New Triaxially Braided Ductile Fabric," ACI Structural Journal Vol. 100, No. 6, pp. 804-814.
  49. Grace, N.F., Ragheb, W.F., and Abdel-Sayed G. (2004). "Strengthening of Cantilever and Continuous Beams Using New Triaxially Braided Ductile Fabric," ACI Structural Journal Vol. 101, No. 2, pp. 237-244.
  50. Harajli, M.H., and Rteil, A.A. (2004). "Effect of Confinement Using Fiber-Reinforced Polymer or Fiber-Reinforced Concrete on Seismic Performance of Gravity Load-Designed Columns," ACI Structural Journal Vol. 101, No. 1, pp. 47-56.
  51. Harmon, T.G., Kim, Y.J., Kardos, K., Johnson, T., and Stark, A. (2003). "Bond of Surface-Mounted Fiber-Reinforced Polymer Reinforcement for Concrete Structures," ACI Structural Journal Vol. 100, No. 5, pp. 557-564.
  52. Iacobucci, R.D., Sheikh, S.A., and Bayrak, O. (2003). "Retrofit of Square Concrete Columns with Carbon Fiber-Reinforced Polymer for Seismic Resistance," ACI Structural Journal Vol. 100, No. 6, pp. 785-794.
  53. Ibell, T. and Burgoyne, C. (1999). "Use of Fiber-Reinforced Plastics Versus Steel for Shear Reinforcement of Concrete," ACI Structural Journal Vol. 96, No. 6, pp 997-1002.
  54. Kerstens, J.G.M., Bennenk, W., and Camp, J.W. (1998). "Prestressing with Carbon Composite Rods: A Numerical Method for Developing Reusable Prestressing Systems," ACI Structural Journal Vol. 95, No. 1, pp. 43-50.
  55. Krstulovic-Opara, N., and Naaman, A.E. (2000). "Self-Stressing Fiber Composites," ACI Structural Journal Vol. 97, No. 2, pp 335-344.
  56. Lacasse, C., Labossière, P., and Neale, K.W. (2003). "On Fiber-Reinforced Polymer Rehabilitation of Alkali-Aggregate Reaction-Damaged Beams," ACI Structural Journal Vol. 100, No. 1, pp. 66-74.
  57. Lamanna, A.J., Bank, L.C., and Scott, D.W. (2001). "Flexural Strengthening of Reinforced Concrete Beams Using Fasteners and Fiber-Reinforced Polymer Strips," ACI Structural Journal Vol. 98, No. 3, pp. 368-376.
  58. Lees, J.M., and Burgoyne, C.J. (1999). "Experimental Study of Influence of Bond on Flexural Behavior of Concrete Beams Pretensioned with Aramid Fiber Reinforced Plastics," ACI Structural Journal Vol. 96, No. 3, pp. 377-385.
  59. Lees, J. M., and Burgoyne, C. J. (2000). "Analysis of Concrete Beams with Partially Bonded Composite Reinforcement," ACI Structural Journal Vol. 97, No. 2, pp 252-258.
  60. Mahmoud, Z.I., Rizkalla, S.H., and Zaghloul, E.-E.R. (1999). "Transfer and Development Lengths of Carbon Fiber Reinforced Polymers Prestressing Reinforcement," ACI Structural Journal Vol. 96, No. 4, pp. 594-602.
  61. Malek, A.M., Saadatmanesh, H., and Ehsani, M.R. (1998). "Prediction of Failure Load of R/C Beams Strengthened with FRP Plate Due to Stress Concentration at the Plate End," ACI Structural Journal Vol. 95, No. 2, pp. 142-152.
  62. Malek, A.M., and Saadatmanesh, H. (1998). "Analytical Study of Reinforced Concrete Beams Strengthened with Web-Bonded Fiber Reinforced Plastic Plates or Fabrics," ACI Structural Journal Vol. 95, No. 3, pp. 343-352.
  63. Malek, A.M., and Saadatmanesh, H. (1998). "Ultimate Shear Capacity of Reinforced Concrete Beams Strengthened with Web-Bonded Fiber Reinforced Plastic Plates," ACI Structural Journal Vol. 95, No. 4, pp. 391-399.
  64. Masmoudi, R., Thériault, M., and Benmokrane, B. (1998). "Flexural Behavior of Concrete Beams Reinforced with Deformed Fiber Reinforced Plastic Reinforcing Rods," ACI Structural Journal Vol. 95, No. 6, pp. 665-676.
  65. Michaluk, C.R., Rizkalla, S.H., Tadros, G., and Benmokrane, B. (1998). "Flexural Behavior of One-Way Concrete Slabs Reinforced by Fiber Reinforced Plastic Reinforcements," ACI Structural Journal Vol. 95, No. 3, pp. 353-365.
  66. Mirmiran, A., Shahawy, M., El Khoury, C., and Naguib, W. (2000). "Large Beam-Column Tests on Concrete-Filled Composite Tubes," ACI Structural Journal Vol. 97, No. 2, pp 268-276.
  67. Mirmiran, A., Yuan, W., and Chen, X. (2001). "Design for Slenderness in Concrete Columns Internally Reinforced with Fiber-Reinforced Polymer Bars," ACI Structural Journal Vol. 98 No. 1, pp 116-125.
  68. Naguib, W., and Mirmiran, A. (2002). "Time-Dependent Behavior of Fiber-Reinforced Polymer Confined Concrete Columns under Axial Loads," ACI Structural Journal Vol. 99, No. 2, pp. 142-148.
  69. Nakaba, K., Kanakubo, T., Furuta, T., and Yoshizawa, H. (2001). "Bond Behavior between Fiber-Reinforced Polymer Laminates and Concrete," ACI Structural Journal Vol. 98, No. 3, pp. 359-367.
  70. Nanni, A., Utsunomiya, T., Yonekura, H., and Tanigaki, M. (1992). "Transmission of Prestressing Force to Concrete by Bonded Fiber Reinforced Plastic Tendons," ACI Structural Journal Vol. 89 No. 3, pp 335-344.
  71. Nanni, A., and Tanigaki, M. (1992). "Pretensioned Prestressed Concrete Members with Bonded Fiber Reinforced Plastic Tendons: Development and Flexural Bond Length (Static)," ACI Structural Journal Vol. 89 No. 4, pp 433-441.
  72. Okeil, A.M., El-Tawil, S., and Shahawy, M. (2001). "Short-Term Tensile Strength of Carbon Fiber-Reinforced Polymer Laminates for Flexural Strengthening of Concrete Girders," ACI Structural Journal Vol. 98, No. 4, pp. 470-478.
  73. Ospina, C.E., Alexander, S.D.B., and Cheng, J.J.R. (2003). "Punching of Two-Way Concrete Slabs with Fiber-Reinforced Polymer Reinforcing Bars or Grids," ACI Structural Journal Vol. 100, No. 5, pp. 589-598.
  74. Padmarajaiah, S.K., and Ramaswamy, A. (2001). "Behavior of Fiber-Reinforced Prestressed and Reinforced High-Strength Concrete Beams Subjected to Shear," ACI Structural Journal Vol. 98, No. 5, pp. 752-761.
  75. Park, S.Y. and Naaman, A.E. (1999). "Dowel Behavior of Tensioned Fiber Reinforced Polymer (FRP) Tendons," ACI Structural Journal Vol. 96, No. 5, pp 799-806.
  76. Razaqpur, A. G., Švecová, D., and Cheung, M.S. (2000). "Rational Method for Calculating Deflection of Fiber-Reinforced Polymer Reinforced Beams," ACI Structural Journal Vol. 97, No. 1, pp 175-184.
  77. Ritchie, P.A., Thomas, D.A., Lu, L.-W., and Connelly, G.M. (1991). "External Reinforcement of Concrete Beams Using Fiber Reinforced Plastics," ACI Structural Journal Vol. 88 No. 4, pp 490-500.
  78. Ross, C.A, Jerome, D.M., Tedesco, J.W., and Hughes, M.L. (1999). "Strengthening of Reinforced Concrete Beams with Externally Bonded Composite Laminates," ACI Structural Journal Vol. 96, No. 2, pp. 212-220.
  79. Saadatmanesh, H. (1994). "Fiber Composites for New and Existing Structures," ACI Structural Journal Vol. 91 No. 3, pp 346-354.
  80. Saadatmanesh, H., Ehsani, M.R., and Li, M.W. (1994). "Strength and Ductility of Concrete Columns Externally Reinforced with Fiber Composite Straps," ACI Structural Journal Vol. 91 No. 4, pp 434-447.
  81. Saadatmanesh, H., Ehsani, M.R., and Jin, L. (1996). "Seismic Strengthening of Circular Bridge Pier Models with Fiber Composites," ACI Structural Journal Vol. 93 No. 6, pp 639-647.
  82. Saadatmanesh, H., Ehsani, M.R., and Jin, L. (1997). "Repair of Earthquake-Damaged RC Columns with FRP Wraps," ACI Structural Journal Vol. 94, No. 2, pp. 206-215.
  83. Sen, R., Mariscal, D., and Shahawy, M. (1993). "Durability of Fiberglass Pretensioned Beams," ACI Structural Journal Vol. 90 No. 5, pp 525-533.
  84. Sen, R., Issa, M., Wadsack, P., and Shahawy, M. (1993). "Driving Stresses in Fiberglass Pretensioned Piles," ACI Structural Journal Vol. 90 No. 6, pp 666-674.
  85. Sen, R., Shahawy, M., Rosas, J., and Sukumar, S. (1998). "Durability of Aramid Pretensioned Elements in a Marine Environment," ACI Structural Journal Vol. 95, No. 5, pp. 578-587.
  86. Sen, R., Shahawy, M., Sukumar, S., and Rosas, J. (1998). "Durability of Carbon Pretensioned Elements in a Marine Environment," ACI Structural Journal Vol. 95, No. 6, pp. 716-724.
  87. Sen, R., Shahawy, M., Rosas, J., and Sukumar, S. (1999). "Durability of Aramid Fiber Reinforced Plastic Pretensioned Elements under Tidal/Thermal Cycles," ACI Structural Journal Vol. 96, No. 1, pp. 95-104.
  88. Sen, R., Shahawy, M., Sukumar, S., and Rosas, J. (1999). "Durability of Carbon Fiber Reinforced Polymer (CFRP) Pretensioned Elements under Tidal/Thermal Cycles," ACI Structural Journal Vol. 96, No. 3, pp. 450-457.
  89. Sen, R., Carpenter, W., and Snyder, D. (1999). "Finite Element Modeling of Fiber Reinforced Polymer Pretensioned Elements Subjected to Environmental Loads," ACI Structural Journal Vol. 96, No. 5, pp 766-773.
  90. Sen, R., Shahawy, M., Mullins, G., and Spain, J. (1999). "Durability of Carbon Fiber-Reinforced Polymer/Epoxy/Concrete Bond in Marine Environment," ACI Structural Journal Vol. 96, No. 6, pp 906-914.
  91. Sen, R., Mullins, G., and Salem, T. (2002). "Durability of E-Glass/Vinylester Reinforcement in Alkaline Solution," ACI Structural Journal Vol. 99, No. 3, pp. 369-375.
  92. Shahawy, M., Chaallal, O., Beitelman, T.E., and El-Saad, A. (2001). "Flexural Strengthening with Carbon Fiber-Reinforced Polymer Composites of Preloaded Full-Scale Girders," ACI Structural Journal Vol. 98, No. 5, pp. 735-742.
  93. Shahrooz, B.M., Boy, S., and Baseheart, T.M. (2002). "Flexural Strengthening of Four 76-Year-Old T-Beams with Various Fiber-Reinforced Polymer Systems: Testing and Analysis," ACI Structural Journal Vol. 99, No. 5, pp. 681-691.
  94. Sharif, A., Al-Sulaimani, G.J., Basunbul, I.A., Baluch, M.H., and Ghaleb, B.N. (1994). "Strengthening of Initially Loaded Reinforced Concrete Beams Using FRP Plates," ACI Structural Journal Vol. 91 No. 2, pp 160-168.
  95. Sheikh, S.A., DeRose, D., and Mardukhi, J. (2002). "Retrofitting of Concrete Structures for Shear and Flexure with Fiber-Reinforced Polymers," ACI Structural Journal Vol. 99, No. 4, pp. 451-459.
  96. Shin, Y.-S., and Lee, C. (2003). "Flexural Behavior of Reinforced Concrete Beams Strengthened with Carbon Fiber-Reinforced Polymer Laminates at Different Levels of Sustained Load," ACI Structural Journal Vol. 100, No. 2, pp. 231-239.
  97. Stallings, J.M., and Porter, N.M. (2003). "Experimental Investigation of Lap Splices in Externally Bonded Carbon Fiber-Reinforced Plastic Plates," ACI Structural Journal Vol. 100, No. 1, pp. 3-10.
  98. Svecova, D., and Raszaqpur, A. G. (2000). "Flexural Behavior of Concrete Beams Reinforced with Carbon Fiber-Reinforced Polymer (CFRP) Prestressed Prisms," ACI Structural Journal Vol. 97, No. 5, pp 731-738.
  99. Taha, M.M.R., and Shrive, N.G. (2003). "New Concrete Anchors for Carbon Fiber-Reinforced Polymer Post-Tensioning Tendons - Part 1: State-of-the-Art Review/Design," ACI Structural Journal Vol. 100, No. 1, pp. 86-95.
  100. Taha, M.M.R., and Shrive, N.G. (2003). "New Concrete Anchors for Carbon Fiber-Reinforced Polymer Post-Tensioning Tendons - Part 2: Development/Experimental Investigation," ACI Structural Journal Vol. 100, No. 1, pp. 96-104.
  101. Takiguchi, K., and Abdullah (2001). "Shear Strengthening of Reinforced Concrete Columns Using Ferro-Cement Jacket," ACI Structural Journal Vol. 98, No. 5, pp. 696-704.
  102. Tavarez, F.A., Bank, L.C., and Plesha, M.E. (2003). "Analysis of Fiber-Reinforced Polymer Composite Grid Reinforced Concrete Beams," ACI Structural Journal Vol. 100, No. 2, pp. 250-258.
  103. Toutanji, H.A., and Saafi, M. (2000). "Flexural Behavior of Concrete Beams Reinforced with Glass Fiber-Reinforced Polymer (GFRP) Bars," ACI Structural Journal Vol. 97, No. 5, pp 712-719.
  104. Triantafillou, T.C., Deskovic, N., and Deuring, M. (1992). "Strengthening of Concrete Structures with Prestressed Fiber Reinforced Plastic Sheets," ACI Structural Journal Vol. 89 No. 3, pp 235-244.
  105. Triantafillou, T.C. (1998). "Shear Strengthening of Reinforced Concrete Beams Using Epoxy-Bonded FRP Composites," ACI Structural Journal Vol. 95, No. 2, pp. 107-115.
  106. Tumialan, J.G., Galati, N., and Nanni, A. (2003). "Fiber-Reinforced Polymer Strengthening of Unreinforced Masonry Walls Subject to Out-of-Plane Loads," ACI Structural Journal Vol. 100, No. 3, pp. 321-329.
  107. Tureyen, A.K., and Frosch, R.J. (2002). "Shear Tests of FRP-Reinforced Concrete Beams without Stirrups," ACI Structural Journal Vol. 99, No. 4, pp. 427-434.
  108. Vasquez, A., and Karbhari, V.M. (2003). "Fiber-Reinforced Polymer Composite Strengthening of Concrete Slabs with Cutouts," ACI Structural Journal Vol. 100, No. 5, pp. 665-673.
  109. Velazquez-Dimas, J.I., Ehsani, M.R., and Saadatmanesh, H. (2000). "Out-of-Plane Behavior of Brick Masonry Walls Strengthened with Fiber Composites," ACI Structural Journal Vol. 97, No. 3, pp 377-387.
  110. Vijay, P.V., and GangaRao, H.V.S. (2001). "Bending Behavior and Deformability of Glass Fiber-Reinforced Polymer Reinforced Concrete Members," ACI Structural Journal Vol. 98, No. 6, pp. 834-842.
  111. Wang, Y.C., and Restrepo, J.I. (2001). "Investigation of Concentrically Loaded Reinforced Concrete Columns Confined with Glass Fiber-Reinforced Polymer Jackets," ACI Structural Journal Vol. 98, No. 3, pp. 377-385.
  112. Wong, R.S.Y., and Vecchio, F.J. (2003). "Towards Modeling of Reinforced Concrete Members with Externally Bonded Fiber-Reinforced Polymer Composites," ACI Structural Journal Vol. 100, No. 1, pp. 47-55.
  113. Yost, J.R., and Gross, S.P. (2002). "Flexural Design Methodology for Concrete Beams Reinforced with Fiber-Reinforced Polymers," ACI Structural Journal Vol. 99, No. 3, pp. 308-316.
  114. Yost, J.R., Gross, S.P., and Dinehart, D.W. (2003). "Effective Moment of Inertia for Glass Fiber-Reinforced Polymer-Reinforced Concrete Beams," ACI Structural Journal Vol. 100, No. 6, pp. 732-739.
Updated: 08/07/2013
Federal Highway Administration | 1200 New Jersey Avenue, SE | Washington, DC 20590 | 202-366-4000