U.S. Department of Transportation
Federal Highway Administration
1200 New Jersey Avenue, SE
Washington, DC 20590
202-366-4000


Skip to content U.S. Department of Transportation/Federal Highway AdministrationU.S. Department of Transportation/Federal Highway Administration

Bridges & Structures

<< Previous Contents Next >>

Technical Manual for Design and Construction of Road Tunnels - Civil Elements

References

American Association of State Highway and Transportation Officials (AASHTO) (2008) "AASHTO LRFD Bridge Design Specifications 4th Edition", Washington, D.C.

American Association of State Highway and Transportation Officials (AASHTO) (2004) "A Policy on Geometric Design of Highways and Streets", Washington, D.C.

American Association of State Highway and Transportation Officials (AASHTO) (1988) "Manual on Subsurface Investigations", Washington, D.C.

American Association of State Highway and Transportation Officials (AASHTO) (1984) "Guide for Roadway Lighting", Washington, D.C.

American Society of Civil Engineers (ASCE) (2007). "Geotechnical Baseline Reports for Construction - Suggested Guidelines", NY.

American Society of Civil Engineers. (ASCE) (1997). "Geotechnical Baseline Reports for Underground Construction -Guidelines and Practices", NY.

American Society of Civil Engineers (ASCE) (1994). "Avoiding and Resolving Disputes during Construction," ASCE Technical Committee on Contracting Practices of the Underground Technology Research Council, ASCE, NY.

American Society of Civil Engineers.(ASCE) (1991). "Avoiding and Resolving Disputes during Construction.", Technical Committee on Contracting Practices of the Underground Technology Research Council.

American Society of Civil Engineers.(ASCE) (1989). "Avoiding and Resolving Disputes in Underground Construction.", Technical Committee on Contracting Practices of the Underground Technology Research Council.

American Society of Civil Engineers (ASCE) "Guidelines for the Seismic Design of Oil and Gas Pipeline Systems", Technical Council on Lifeline Earthquake Engineering", Committee on Gas and Liquid Fuel Lifelines, (1984), ASCE, New York.

Association Francaise des Travaux en Souterrain. (1991). "Recommendations on Grouting for Underground Works," Tunneling and Underground Space Technology, Vol. 6, No. 4: 383-462.

Babendererdel, S., Hoek, E., Marinos, P., and Cardoso, A.S. (2004) "Geological risk in the use of TBMs in heterogeneous rock masses - The case of "Metro do Porto" and the measures adopted", Paper for Conference in Aveiro, Portugal in April 2004

Barton, N., (2002), "Some new Q-value correlations to assist in Site Characterization and Tunnel Design", ISRM, 39, p185-216, Pergamon.

Barton N. (2001), "Letter to the Editor" News Journal ISRM, No. 2001

Barton N. (1991), "Geotechnical Design", World tunneling, November 1991, p410-416.

Barton, N. (1988). "Rock Mass Classification and Tunnel Reinforcement Selection Using the Q-System," ASTM STP 984, Rock Classification Systems for Engineering Purposes.

Barton N, Buen B, Roald S. (2001) "Strengthening the case for grouting", Tunnels and Tunnelling International, December 2001, January 2002.
Barton N, Lien R, Lunde J. (1980) Application of the Q-system in design decisions concerning dimensions and appropriate support for underground installations". Int Conf Subsurface Space, Rockstore, Stockholm, Sub-surface Space ; 2:553-61.

Barton, N., Lien, R., and Lunde, J. (1974). "Engineering Classification of Rock Masses for the Design of Tunnel Support" Rock Mechanics, Vol. 6, No. 4.

Bickel, Kuesel and King, 2nd ed. (1996) "Tunnel Engineering Handbook"; Chapman & Hall, N.Y.

Bickel, Kuesel and King, 1st ed. (1984) "Tunnel Engineering Handbook"; Van Hostrand Reinhold, N.Y

Bieniawski, Z. T. (1992). "Design Methodology in Rock Engineering. 198 pp. Rotterdam: A.A.

Bieniawski, Z. T. (1989). "Engineering rock mass classifications: a complete manual for engineers and geologists in mining, civil and petroleum engineering. 251p., Wiley, NewYork:

Bieniawski, Z. T. (1984)."Rock Mechanics Design in Mining and Tunneling. A.A. Balkema, Rotterdam, 272 p.

Bieniawski, Z. T. (1979). "The Geomechanics Classification in Rock Engineering Applications," Proceedings, 4th International Congress on Rock Mechanics, ISRM, Montreux. A. A. Balkema, Rotterdam, Vol. 2: 41-48.

Bieniawski, Z.T. (1978). Determining rock mass deformability - experiences from case histories. Int. J. Rock Mech. Min. Sci. & Geomech. Abstr. 15, 237-247.

Bieniawski, Z.T., (1973). "Engineering classification of jointed rock masses. Trans. S. African Instn.Civ. Engrs., Vol. 15, No 12, Dec. 1973, pp 335 - 344.

Boscardin, M.D. and Cording, E.J. (1989)."Building Response to Excavation-Induced Settlement," J. of Geotech Eng., 1989, ASCE, 115(1), 1-21.

Brekke, T. L., and Ripley, B. D. (1993). "Design of Pressure Tunnels and Shafts," Chapter 14 of Comprehensive Rock Engineering - Vol. 2, J. A. Hudson, ed.: 349-369.

Brierley, G.S. and Hatem, D.J. (2002), "Design Build - Subsurface Projects", Zeni House Books,

Brierley, G.S. (1998), "Subsurface Investigations and Geotechnical Report Preparation", Chapter 3, Subsurface Conditions Risk Management for Design and Construction Management Professionals, Hatem, D.J., ed., John Wiley & Sons, Inc.

Brierley, G.S.(1998a), "Going Under? How about Urban Design/Build!",World Tunneling, November 1998.

British Highway Agency. (1999). "Design of Road Tunnels" Design Manual for Roads and Bridges.

British Tunnelling Society (BTS) and Institution of Civil Engineers (ICE) (2005). "Closed-Face Tunnelling Machines and Ground Stability - A guideline for best practice". Thomas Telford Ltd., March.

British Tunnelling Society (BTS) and Institution of Civil Engineers (ICE) (2004). "Tunnel Lining Design Guide", Thomas Telford Ltd., March.

Brown, E. T. (1981). "Rock Characterization Testing and Monitoring: ISRM Suggested Methods, published for the Commission on Testing Methods, International Society for Rock Mechanics by Pergammon Press.

Brown, E. T., Bray, J. W., Ladanyi, B., and Hoek, E. (1983). "Ground Response Curves for Rock Tunnels, Journal of Geotechnical Engineering," Vol. 109, No. 1, American Society of Civil Engineering.

Burns, J. Q., and Richard, R. M., (1964) "Attenuation of Stresses for Buried Cylinders,"Proceedings of the Symposium on Soil-Structure Interaction, Tempe, Univ. of Arizona,1964.

Chen and Lui (2005) " Handbook of Structural Engineering", Chapter 28 "Tunnel Structures", CRC, NY.

Choi, S., Ott, K.R., Fareth, A., Kinneen,J., and Barboe, E.S. (2007)"Tunnel Interaction: Hydraulic, Mechanical, and Hydromechanical Approach." Proceeding RETC, Toronto, CN, SME, pp 137-146.

Chryssanthakis P, Barton N. (1992) "Predicting performance of the 62m span ice hockey cavern in Gjvik, Norway. Proceedings of the International Conference Fractured and Jointed Rock Masses. Lake Tahoe, CA, 1992.

Cording, E. J., and W. H. Hansmire. (1975). Displacements around sofi ground tunnels. Proceedings, Fifth Panamerican Congress on Soil Mechanics and Foundation Engineering, Buenos Aires.

Cording, E.J., and Deere, D.U. (1972) "Rock Tunnel Supports and Field Measurement," Proceedings of First North AmericanRapid Ecavation and Tunneling Conference, AIME, Chicago, Illinois, June 5-7.

Cording, E.J., Hendron A.J., and Deere, D.U. (1971) "Rock Engineering for Underground Caverns" Proceedings of Symposium on Underground Rock Chamber, ASCE, NY, 1971, p567-600.

Coulter, S. and Martin, D.C., (2004), "Ground Deformations Above Large Shallow Tunnel Excavated Using Jet Grouting," EUROCK 2004 & 53rd Geomechanics Colloquium, Schubert (Ed.), VGE.

Critchfield, J. W. (1985). Tunneling in Gassy Ground," Proceedings, RETC, New York, AIME: 441-461.

Cundall, P. A. (1976). "Explicit Finite Difference Methods in Geomechanics, Numerical Methods in Engineering," Proceedings of the EF Conference on Numerical Methods in Geomechanics, Blacksburg, Virginia. Vol. 1: 132-150.

Cundall, P. A., and Hart, R. D. (1993). "Numerical Modeling of Discontinuities" Comprehensive Rock Engineering, Vol. 2, J. A. Hudson, ML, Pergammon Press: 231-243.
Curtis D.J. (1976), "Discussion of :Muri Wood, A.M., The Circular Tunnel in Elastic Ground," Geotechnique, Vol.26, No.2, June, 1976, pp.231-237.

Dar, S.M. and Bates, R.C., (1974). "Stress Analysis of Hollow Cylindrical Inclusions", J.Geotechnical Engineering Division, ASCE, Vol. 100, No. GT2, Feb, 1974, pp. 123-138.

Daugherty, C.W., (1998), "Monitoring of Movements Above Large Shallow Jacked Tunnels", Proc. GeoCongress 98, Boston, ASCE Jacked Tunnel Design & Construction, pp 39-60.

Deangeli, C et al (1995): "Shear strength evaluation of reinforced rock discontinuities". In: An-chors in Theory and Practice, p. 101 - 108, Proc. Int. Symp. On Anchors in Theory and Practice, ed. Widmann, R., Salzburg 9-10 October 1995, Rotterdam/Brookfield, 1995.

Deere, D. U., and Deere, D. W. (1988). "The Rock Quality Designation (RQD) Index in Practice, in Rock Classification Systems for Engineering Purposes," L. Kirkaldie, ed., ASTM 1984.

Deere, D. U., Peck, R. B., Monsees, J. E., and Schmidt, B. (1969). "Design of Tunnel Liners and Support Systems," Report to UMTA, DOT, available through NTIS.

Deere, D. U., Peck, R. B., Parker, H. W., Monsees, J. E., and Schmidt, B. (1970). "Design of Tunnel Support Systems": Highway Res. Rec. No. 339:26-33.

Dowding, C. H. (1985). Blast Vibration Monitoring and Control, Prentice Hall.

Dowding, C. H., and Rozen, A., Damage to Rock Tunnels from Earthquake Shaking, Journal of the Geotechnical Engineering Division, ASCE, Vol. 104, No. GT2, 1978.

Dunnicliff, J. (1998, 1993) "Geotechnical Instrumentation for Monitoring Field Performance, John Wiley & Sons, New York, 577.

Edgerton, W.W. (2008)." Recommended Contract Practices for Underground Construction",Society of Mining Engineers.

Einstein H.H., (1991). ‘Observation, Quantification and Judgement: Terzaghi and Engineering Geology.’ J. Geotech. Engn., ASCE, Vol. 117, No. 11, pp. 1772-1778.

Einstein, H.H. (1989). Design and analysis of underground structures in swelling and squeezing rocks (Chapter 6). In Underground Structures-Design and Instrumentation, R.S. Sinha, ed. New York:

Einstein H.H., Steiner W. and Baecher G.B., (1979). "Assessment of Empirical Design Methods for Tunnels in Rock." RETC 1979, pp. 683-705.

Einstein H.H. and Schwartz, C.W., (1979). "Simplified Analysis for Tunnel Supports", J. Geotech. Engn. ASCE, Vol. 105, No. GT4, April 1979, pp.499-518.

Electric Power Research Institute (EPRI). (1987). "Design Guidelines for Pressure Tunnels and Shafts," Palo Alto, California.

Federal Highway Administration (FHWA) (2006) "Underground Transportation Systems in Europe: Safety, Operations, and Emergency Response", FHWA-PL-06-012, Washington, D.C.

Federal Highway Administration (FHWA) (2006a) "Workbook for Subsurface Investigation Inspection Qualification", FHWA-NHI-05-035, Washington, D.C.

Federal Highway Administration (FHWA) (2005a) "Highway, Rail and Transit Tunnel Inspection Manual", FHWA-IF-05-002, Washington, D.C.

Federal Highway Administration (FHWA) (2005b) "Highway, Rail and Transit Tunnel Maintenance and Rehabilitation Manual", FHWA-IF-05-017, Washington, D.C.

Federal Highway Administration (FHWA) (2005c) "Road Tunnel Design Guidelines", FHWA-IF-05-023, Washington, D.C.

Federal Highway Administration (FHWA) (2005d) "Soil Slope and Embankment Design", FHWA-NHI-05-023, Washington, D.C.

Federal Highway Administration (FHWA) (2005e) "Earth Retaining Structures", FHWA-NHI-05-046, Washington, D.C.

Federal Highway Administration (FHWA) (2005f) "Micropile Design and Construction", FHWA-NHI-05-039, Washington, D.C.

Federal Highway Administration (FHWA) (2004) "Ground Improvement Methods", FHWA-NHI-04-001, Washington, D.C.

Federal Highway Administration (FHWA) (2003) "Geotechnical Engineering Circular No. 7 - Soil Nail Walls", FHWA-IF-03-017, Washington, D.C.

Federal Highway Administration (FHWA) (2002a) "Geotechnical Engineering Circular No. 5 - Evaluation of Soil and Rock Properties", FHWA-IF-02-034, Washington, D.C.

Federal Highway Administration (FHWA) (2002b) "Subsurface Investigations - Geotechnical Site Characterization - Reference Manual", FHWA-NHI-01-031, Washington, D.C.

Federal Highway Administration (FHWA) (1999) "Training Course in Geotechnical and Foundation Engineering: Rock Slopes - Participants Manual" FHWA-HI-99-007, Washington, D.C.

Federal Highway Administration (FHWA) (1998) "Training Course in Geotechnical and Foundation Engineering: Geotechnical Instrumentation - Participants Manual" FHWA-HI-98-034, Washington, D.C.

Federal Highway Administration (FHWA) (1989) "Highway Functional Classification: Concepts, Criteria, and Procedures", http://www.fhwa.dot.gov/planning/fctoc.htm, Washington D.C.

Federal Highway Administration (FHWA) (1988) "Checklist and Guidelines for Review of Geotechnical Reports and Preliminary Plans and Specifications", FHWA-ED-88-053, Washington, D.C.

Federal Highway Administration (FHWA) (1983) "Prevention and Control of Highway Tunnel Fires", FHWA-RD-83-032, Washington, D.C.

Federal Highway Administration (FHWA) (1976) "Cut-and-Cover Tunneling - Vol. 1. Construction Methods, Design and Activity Variations", FHWA-RD-76-28, Washington, D.C.Fernandez, G., (1994) "Behaviro of Pressure Tunnels and Guidelines for Liner Design." J. Geotechnical Engrg. ASCE, Vol. 120, No.10, pp. 1768-1791.

Gall, V., (2000). "Three Pillars for an Effective Waterproofing System," Proceedings, North American Tunneling 2000, Boston, Massachusetts, June 6 - 11, 2000.

Gall, V., Munfah, N. and Cerulli, D Zeidler, K., (2004). "Shotcrete for Tunnel Final Linings - Design and Construction Considerations," Seminar Proceedings, NAT 2004 Proceedings, North American Tunneling Conference, Atlanta, Georgia, April 17 - 22, 2004.

Gall, V., Urschitz, G. and Zeidler, K., (2000). "Frozen Ground for Building Support - Implementation of Innovative Engineering Concepts for Tunneling at Russia Wharf," Proceedings, North American Tunneling, Boston, Massachusetts, June 6 - 11, 2000.

Garshol, K. (1983). Excavation support and pre-grouting of TBM-driven sewer tunnel, Norwegian Tunneling Technology Publication No.2, Tapir.

Gildner, J. and Urschitz, G.J., (2004). "SEM/NATM Design and Contracting Strategies", North American Tunneling 2004, Ozdemir ed., Taylor & Francis Group, London

Goldberg, D.T., W.E. Jaworsky, and M.P. Gordon (1976). Lateral Support Systems and Underpinning, U.S. Department of Transportation, Report No. FWHA-RD-75-128, Vo. I, April, 1976.

Goodman, R. E., and Shi, G. H. (1985). Block Theory and its Application to Rock Engineering, Prentice-Hall, New Jersey.

Goodman, R.E. (1995). Block theory and its applications-the 1995 Rankine Lecture. Geotechnique. In press.

Gnilsen, R., 1986: "Unreinforced Concrete Tunnel Lining - Design Concepts". Technical Bulletin, Volume 1.

Grant, R., J. T. Christian, and E. H. Vanmarke (1981). Differential settlement of buildings, Journal of Geotechnical Engineering, 107, American Society of Civil Engineers.

Grimstad, E. & Barton, N. (1993)."Updating of the Q-System for NMT. In Kompen, Opsahl & Berg (eds), Proc. Of the International Symposium on Sprayed Concrete - Modern Use of Wet Mix Sprayed Concrete for Underground Support, Fagernes.

Hansmire, W. and Monsees, J.E. (2006), "Evolving Practices for Tunnel Contracts in the United States," Proceedings of the 31st ITA-AITES World Tunnel Congress, 2006, Seoul, Korea, Elsevier, London.

Hansmire, W. and Monsees, J.E. (2005), "Engineers, Contractors, and Soft-Ground Tunneling Equipment," Proceedings of NAT 2004, Atlanta, GA, Taylor and Francis Group, London.

Hemphill, G. B. (1990). "Mechanical Excavation System: Selection, Design, and Performance in Weak Reek; Ph.D. dissertation, University of Idaho, Moscow: 361.???

Hemphill, G. B. (1981)., "Blasting Operation".

Heuer, R.E. (2005) "Estimating Rock Tunnel Water Inflow-II," Proceedings of RECT, 2005, Seattle, SME, pp.41-60.

Heuer, R.E. (1995) "Estimating Rock Tunnel Water Inflow," Proceedings of RECT, 1995, pp.41-60.

Heuer, R.E. (1974). Important ground parameters in soft ground tunneling. Proceedings of Specialty Conference on Subsurface Exploration for Underground Excavation and Heavy Construction, New York: ASCE

Heuer, R.E., and D. L. Virgens. (1987). Anticipated behavior of silty sands in tunneling. Proceedings, Rapid Excavation and Tunneling Conference, Littleton, co: Society of Mining Engineers, Inc.

Hoeg, K., (1968). "Stresses Against Underground Structural Cylinders," Journal of the Soil Mechanics and Foundation Division, ASCE, Vol. 94, SM4, April 1968.

Hoehn, K., (1999). The Single-Shell Shotcrete Method Applied at Two Tunneling Sites - Concrete Technology and Economic Viability. Proceedings, Spritzbetontechnologie ’99, BMI 1/99, 255-270.

Hoek, E. (2007), "Practical Rock Engineering"

Hoek, E (2000), "Big Tunnels in Bad Rock", The Terzaghi Lecture 2000, ASCE Journal of Geotechnical and Geoenvironmental Engineering Vol. 127, No. 9. September 2001, pages 726-740.

Hoek, E. (1983). "Strength of jointed rock masses." The Rankine Lecture 1983, Geotechnique 33, no 3, pp. 187-223.

Hoek, E., and Brown, E. T. (1988). "The Hoek-Brown Failure Criterion - A 1988 Update: Proceedings, 15th Canadian Rock Mech. Symposium, Toronto: 3-38.

Hoek, E., and Brown, E. T. (1980). "Underground Excavations in Rock," Institution of Mining and Metallurgy, London, England: 527.

Hoek, E., Carranza-Torres, C. & Corkum, B. (2002). Hoek-Brown Failure Criterion - 2002 Edition.

Hoek, E and Diederichs, M. 2006. Empirical estimates of rock mass modulus. Int. J Rock Mech. Min. Sci., 43, 203-215

Hoek, E., Kaiser, P.K., Bawden, W.F., (2000). "Support of Underground Excavations in Hard Rock".

Hoek, E., Kaiser, P.K. and Bawden. W.F. (1995). "Support of underground excavations in hard rock",  Rotterdam: Balkema.

Hoeking, G. (1978). "Stresses around Tunnel Intersections," in Computer Methods in Tunnel Design, Institution of Civil Engineers: 41-59.

Idriss, I. M. and Sun, J. I. (1992), SHAKE91 - A computer Program for Conducting equivalent Linear Seismic Response Analyses of Horizontally Layered Soil Deposits, Center for Geotechnical Modeling, Department of Civil and Environmental Engineering, University of California at Davis.

International Tunneling Association (ITA) (1997). Immersed and Floating Tunnels State of the Art Report, Working Group No. 11., Tunneling and Underground Space Technology, Pergamon Press, Vol. 12, No.2 (April).

Institution of Civil Engineers, (1996), "Sprayed Concrete Linings (NATM) for Tunnels in Soft Ground," Thomas Telford Publishing, Thomas Telford Services Ld., 1 heron Quay, London, E14 4JD.

International Tunneling Association (ITA) (1988)." Guidelines for the Design of Tunnels", Tunneling and Underground Space Technology, Pergamon Press, Vol. 3, No.3, pp. 237-249 (April).

ISRM. (1982). International Society for Rock Mechanics, ISRM Suggested Methods: Rock Characterization, Testing and Monitoring (E. T. Brown, ed.), Pergammon Press, Oxford.

ISRM. (1977). International Society for Rock Mechanics, ISRM Suggested Methods: The Quantitative Description of Discontinuities in Rock Masses, Pergammon Press, Oxford.

Japanese Society of Civil Engineers (JSCE) (2000). "Japanese Standard for Mountain Tunneling" Working Group for Shield Tunneling; Subcommittee on English Edition of the Japanese Standard for Tunneling.

Japanese Society of Civil Engineers (JSCE) (1996). "Japanese Standard for Shield Tunneling" Working Group for Shield Tunneling; Subcommittee on English Edition of the Japanese Standard for Tunneling.

Keifer, O. (1966) Multiple Layer Shotcrete Lining. ACI Publications, SP-14.

Kessler, P.N and Moore, C.J. (1999); "Tunneling by Tunnel Boring Machine (TBM)".

Kirsch, G., (1898). „Die theorie der elastizitat und die bedurfnisse der festigkeitslehre."Veit. Deit. Ing. 42 (28), 797-807.

Korbin, G. E. (1979). "Factors Influencing the Performance of Full-Face Hard Rock Tunnel Boring Machines," Report to USDOT, UMTA-CA-06-0122-79-1.

Kuesel, T. (1986). "Immersed Tube Tunnels: Concept Design and Construction," Civil Engineering Practice, Boston Society of Civil Engineers, Spring.

Kuesel, T. R. (1969). Earthquake design criteria for subways. Journal of the Structural Division, 95, ST6.

Kuhlmann, D.: "Tunnelbau". In: Wayss & Freitag am Donnerstag, Gespraeche mit Wissenschaft und Praxis, Frankfurt, a.M., Germany.

Kupfer, H. and Kupfer, H., (1990). Statical Behavior and Bond Performance of the Layers of a Single Permanent Tunnel Lining, Proceedings, Spritzbetontechnologie ’90, 11ff.

Lauffer, H. (1995): "Die Bedeutung der Verbundanker für den Untertagebau (The importance of compound anchors for underground excavations)." Proceeding International Symposium on Anchors in Theory and Practice, Widmann, R. (Ed.), Salzburg 9-10 October 1995, Rotterdam/Brookfield, 1995.

Lawrence, DLJ. (1982) "Shotcrete Lining for a Tunnel Requiring Ground Freezing for Initial Support," Shotcrete I c pp. 155-170.

Leonards, G. (1962). Foundation Engineering. McGraw-Hill, New York.

Lowe, J. III and Zaccheo, P.F. (1991) "Subsurface Explorations and Sampling," Chapter 1, Foundation Engineering Handbook, Fang, H. ed., Van Nostrand Reinhold, NY.

Lutenegger, A. et al. (1995) "Recommended Guidelines for Sealing Geotechnical Holes", National Cooperative Highway Research Program Report No. 378

Maidl, B., and Handke, D. (1993). "Overcoming a Collapse in the Karawanken Tunnel," Tunnels and Tunnelling: 30-32.

Mitchell, J. K. (1981). State-of-the-art report on soil improvement, Tenth International Conference on Soil Mechanics and Foundation Engineering, Stockholm.

Mitchell, J.K, and CB. Villet (1987). Reinforcement of Earth Slopes and Embankments, Transportation Research Board, NCHRP Report 290.

Monsees, J. E., (1996) "Soft Ground Tunneling," Chapter 6 of the Tunnel Engineering Handbook, Bickel, Kuesel, and King, editors, Chapman and Hall, New York City, 1996.

Monsees, J. E., and J. L. Merritt (1991). Earthquake considerations in design of the Los Angeles Metro, in Lifeline Earthquake Engineering, M.A. Cassuro, ed., New York: ASCE.

Morgan, D. R. (1991). "Steel Fiber Reinforced Shotcrete for Support of Underground Openings in Canada," Concrete International, Nov: 56-64.

Morgan, H. D. (1961). "A Contribution to the Analysis of Stress in a Circular Tunnel", Geotechnique, Vol.11, No.1, March, 1961, pp. 37-46.

Muir Wood, A M. (1975). "The circular tunnel in elastic ground. Geotechnique, 1, 1975, 115-127

Nakamura, S., Yoshida, N., and Iwatate, Y. (1996), Damage to Daikai Subway Station during the 1995 Hyogoken-Nambu Earthquake and Its Investigation, Japan Society of Civil Engineers, Committee of Earthquake Engineering.

National Fire Protection Association (NFPA) (2008). Standard NFPA 502 "Standard for Road Tunnels, Bridges and Other Limited Access Highways".

National Fire Protection Association (NFPA) (1990). Standard NFPA 130 "Fixed Guideway Transit Systems ".

National Cooperative Highway Research Program (NCHRP) (2006) "Making Transportation Tunnels Safe and Secure", NCHRP Report 525, Vol. 12

NAVFAC (1974). Design Manual-Soil Mechanics, Foundations, and Earth Structures, NAVFAC DM-7, U.S. Naval Publications and Forms Center, March, Change 2.

Nicholson, G.A. and Bieniawski, Z.T. (1990). A nonlinear deformation modulus based on rock mass. classification," Int. J. Min. & Geological Engng 8, 181-202.

O’Carroll, J.B. (2005), "A Guide to Planning, Constructing and Supervising Earth Pressure Balance TBM Tunneling", Parsons Brinckerhoff Monograph No. 18.

Occupational Safety and Health Administration, Safety and Health Standards, Washington, DC.

OGG Austrian Society for Geomechanics, 2007. "Richtlinie fuer die Geomechanische Planung von Untertagbauten mit Zyklischem Vortrieb," (in print) OGG, December 2007.

O’Rourke, T. D., and Shiba, Y. (1997), Seismic Performance and Design of Tunnels, Annual Report, NCEER Highway Project, sponsored by U.S. Department of Transportation and Federal Highway Administration.

O'Rourke, T.D. (1984). "Guidelines for Tunnel Lining Design" ASCE 1984.

Owen, G. N., and Scholl, R. E., Earthquake Engineering of Large Underground Structures, prepared for the Feral Highway Administration, FHWA/RD-80/195, 1981.

Ozdemir, L., and Wang, F. (1979). "Mechanical Tunnel Boring, Prediction, and Machine Design," Final Report NSFIRA-790161: 204.

Palmstrom, A. and Broch, E. (2006). Use and misuse of rock mass classification systems with particular reference to the Q-system. Tunnels and Underground Space Technology, 21, 575-593.

Pariseau, W. G. (2006), "Design Analysis in Rock Mechanics", CRC Press, 2006

Peck, R. B. (1988). Foreword to Geotechnical [instrumentation for Monitoring Field Performance, by John Dunnicliff, Wiley, New York: vii-ix.

Peck, R. B. (1973). "Influence of Non-technical Factors on the Quality of Embankment Dams, Embankment Dam Engineering", Casagrande Vol., Wiley, New York: 201-208. Reprinted in Judgment in Geotechnical Engineering: The Professional Legacy of Ralph B. Peck, J. Dunnicliff and D. U. Deere, ed., 1984. Wiley, New York: 137-144.

Peck, R. B. (1972). "Observation and Instrumentation, Some Elementary Considerations," Postscript, in Judgment in Geotechnical Engineering: The Professional Legacy of Ralph B. Peck, J. Dunnicliff and D. U. Deere, ed., 1984. Wiley, New York: 128-130.

Peck, R. B. (1969). "Deep Excavation and Tunneling in soft Ground." Proceedings of the 7th International Conference of Soil Mechanics, Mexico, State-of-art Volume, 1969, 225-290.

Peck, R B, A J Hendron and B Mohraz. (1969). State of the art of soft ground tunneling. 1st North A M. Rapid Excavation and Tunnelling Conference, 1969, 259- 285.

Pellet, F. & Egger, P. (1995). "Analytical model for the behaviour of bolted rock joints and practical applications". Proceeding International Symposium on Anchors in Theory and Practice, Widmann, R. (Ed.), Salzburg 9-10 October 1995, Rotterdam/Brookfield, 1995.

Pellet, F. et al (1995): "Contribution of fully bonded rock bolts to the shear strength of joints; Analytical and experimental evaluation." Mechanics of Jointed and Faulted Rock, p. 873 - 878, ed. Rossmanith H., Rotterdam/Brookfield, 1995.

Penzien, J. (2000), "Seismically Induced Racking of Tunnel Linings", Earthquake Engineering and Structural Dynamics, Vol. 29, pp. 683-691.
Penzien, J. and Wu, C.L. (1998), "Stress in Lining of Bored Tunnels", Earthquake Engineering and Structural Dynamics, Vol. 27, pp. 238-300.

Permanent International Association of Road Congress (P1ARC) (1987). PIARC report.

Peterson, DL, C.R. Nelson, B.K. Nelson, and B.D. Wagener. (1991). Design and construction of the Lafayette Bluff Tunnel, Proceedings RETC, Seattle.

Phienwaja, N. (1987). Ground response and support performance in a sheared shale, Stillwater Tunnel, Utah, Ph.D. Thesis, University of Illinois at Urbana-Champaign.

Phien-Wej, N., and EJ. Cording. (1991). Sheared Shale Response to Deep TBM Excavation. New York: Elsevier.

Poisel, R. et al (1995). "Das Arbeitsvermögen geankerten Gebirges bei grossen Konvergenzen (The strain energy capacity of bolted rock at large tunnel deformations)". Proceeding International Symposium on Anchors in Theory and Practice, Widmann, R. (Ed.), Salzburg 9-10 October 1995, Rotterdam/Brookfield, 1995.

Polshin, D.E., and Tokar, R.A. (1957). Maximum allowable non-uniform settlement of structures. Proceedings 4th International Conference on Soil Mechanics and Foundation Engineering, Vol. I, London.

Powers, J. P. (1992). Construction Dewatering-New Methods and Applications, Second Edition, New York: John Wiley and Sons.

Powers, J. P., (1981). Construction Dewatering-A Guide to Theory and Practice, John Wiley and Sons, New York.

Powers, J.P. (1972). "Groundwater Control in Tunnel Construction," Proceedings of North American Rapid Excavation and Tunneling Conference, ASCE-AIME, New York.

Power, M., et al. (2006), "Seismic Retrofit Manual for Highway Structures: Part II - Retaining Structures, Slopes, Tunnels, Culverts and Roadways", MCEER Report: MCEER-06-SP11

Power, M. S., and Rosidi, D. (1998), Seismic Vulnerability of Tunnels and Underground Structures Revisited, North American Tunneling.

Proctor, R.Y. and T. L. White (1977). Earth Tunneling with Steel Supports, Commercial Shearing, Inc., Youngstown, OH.

Procter, R. V., and White, T. L. (1946). "Rock Tunneling with Steel Supports", The Commercial Shearing and Stamping Company, Ohio 1946, revised 1968, copyright 1946 by The Commercial Shearing and Stamping Company.

Rabcewicz, L. V.(1948) "Patentschrift, Oesterreichisches Patent Nr. 165573" (Patent Entry, Austrian Patent Nr. 165573, 1948).

Rabcewicz, L.V. (1964). "The New Austrian Tunneling Method," Water Power.

Rabcewicz, L. V. and Golser, J., (1973). "Principles of Dimensioning the Supporting System for the New Austrian Tunneling Method," Water Power, March 1973 Issue.
Ranken, R.E., Ghaboussi, J., and Hendron, A.J., (1978). "Analysis of Ground-Liner Interaction for Tunnels." Report No. UMTA-IL-06-0043-78-3, U.S. Department of Transportation, Washington, D.C.

Rankin, W. J. (1988). "Ground Movements Resulting from Urban Tunnelling: Predictions and Effects." Engineering Geology of Underground Movements Geological Society, 76-88.

Ricketts, Loftin, and Merritt (2003) "Standard Handbook for Civil Engineers", Chapter 20 "Tunnel Engineering," fifth edition, McGraw-Hill, NY.

Ropkins J.W.T. (1998). "Jacked Box Tunnel Design" Proc Geo-Congress 98, Boston, ASCE Jacked Tunnel Design & Construction " pp 21-38.

Roark, R.J., and Yomg,W.C. (1975). Formulas for Stvess and Strain, Fifth Edition, McGraw-Hill, New York.

Rudolf, J. and Gall, V, 2007: "The Dulles Corridor Metrorail Project - Extension to Dulles International Airport and its Tunneling Aspects", 2007 RETC Conference Proceeding, June 10-13.

Russell, H.A. (2002). The Inspection of Highway Tunnels, Unpublished paper.

Russell, H. A. (1992). The Inspection and Rehabilitation of Transit Tunnels, Third Edition, Parsons Brinckerhoff Quade & Douglas Inc. New York, NY.

Schmidt, B. (1979). Settlements and ground movements associated with tunneling in soil. Ph.D. Thesis, University of Illinois.

Schmidt, B. (1974). Prediction of Settlement due to Tunneling in Soil: Three case Histories. Rapid Excavation and Tunneling Conference, San Francisco, California, June, 1974-1999.

Schmidt, B., and Grantz, W. (1979). "Settlement of immersed tunnels," Journal of the Geotechnical Division, ASCE, September.

Schwartz, C. W., Azzouz, A. S., and Einstein, H. H. (1980). "Improved Design of Tunnel Supports," U.S. Department of Transportation, Report No. UMTA-MA-06-0100-8 0-5.

Senthive1, A. (1994). Report to the Board of Consultants for the Yacambu-Quibor Transfer Tunnel, November.

Serafin, J. L., and Pereira, J. P. (1983). "Consideration of the Geomechanics Classification of Bieniawski," Proceedings, Int. Symp. on Exploration for Rock Engineering.

Sharma, S., and Judd, W. R.(1991), Underground Opening Damage from Earthquakes, Engineering Geology, Vol. 30, 1991.

Sharp, W., and L. Ozdemir. (1991). "Computer Modeling for TBM Performance Prediction and Optimization," Proceedings, Int. Symp. on Mine Mechanization and Automation, CSMIUSBM, Vol. 1:4-57 to 4-66.

Shotcrete for Ground Support (1976). Proceedings of the Engineering Foundation Conference, Easton, Maryland (October), ACI Publication SP-54. American Society of Civil Engineers and American Concrete Institute.

Shotcrete for Rock Support (1992). Guidelines and Recommendations- A Compilation, Draft Document (B. Malmberg), February, for the ITA WG Shotcrete Use.

Shotcrete for Underground Support I11 (1978). Papers presented at the 1978 Engineering Foundation Conference, St. Anton am Arlberg, Austria (April). Engineering Foundation, New York.

Shotcrete for Underground Support IV (1982). Selected papers presented at the 1982 Engineering Foundation Conference, Paipa, Boyaca, Colombia (September). Engineering Foundation, New York.

Shotcrete for Underground Support V (1990). Proceedings of the Engineering Foundation Conference, Uppsala, Sweden (June). American Society of Civil Engineers, New York.

Shotcrete for Underground Support VI (1993). Proceedings of the Engineering Foundation Conference, Niagara-on-the-Lake, Canada (May). American Society of Civil Engineers, New York.

Shotcrete for Underground Support VII (1995). Proceedings of the Engineering Foundation Conference, Seefeld, Austria (June).

Shuster, J.A. (1985). "Ground Freezing for Soft Ground Shaft Sinking," Proceedings of Rapid Excavation and Tunneling Conference, June 16-20, New York.

Siskind, D. E., Stagg, M. S., Kopp, J. W., and Dowding, C. H. (1980). "Structure Response and Damage Produced by Ground Vibration from Surface Mine Blasting," U.S. Bureau of Mines, Report of Investigation 8507.

Skempton, A.W ., and D. H. MacDonald. (1956). The allowable settlements of buildings. Proceedings, Institute of Civil Engineers, Part Ill, London.

Skinner, E. H. (1988). "A Ground Support Prediction Concept: The Rock Structure Rating (RSR) Model," ASTM STP 984, L. Kirkaldie, ed.

SME Mining Engineering Handbook. (1992). Second Edition. H. L. Hartman, Senior Editor, Society of Mining Engineers.

St. John, C. M., and Zahrah, T. F. (1987), Aseismic Design of Underground Structures, Tunneling and Underground Space Technology, Vol. 2, No. 2.

Stack, B. (1982). Handbook of Mining and Tunneling Machinery, New York: Wiley.

Stillborg, B. (1986). Professional Users Handbook for Rock Bolting. TransTech Publications, Atlas Copco.

Stoss and Braun, B. (1985). "Sinking a Freeze Shaft with Installation of a Water-Tight, Flexible Lining," Proceedings of Rapid Excavation and Tunneling Conference, June 12-16, 1983, New York.

Structural Anchoring Systems. (2002). Undercut Anchor Mockup, J.M. Associates Worcester, MA.

Szechy, K. (1966). The Art of Tunneling. Akademiai Kiado, Budapest. Use ofshotcrete for Underground Structural Support 1974 ACIIASCE, Detroit.

Taylor, S. and Winsor, (1998). "Developments in Tunnel Jacking" Proc Geo-Congress 98, Boston, ASCE Jacked Tunnel Design & Construction " pp 1-20.

Technique fits tunnel to a tee. 1991. Civil Engineering, July 1991.

Teng, W.C (1962). Foundation Design, Prentice-Hall, Inc., Englewood, NJ.

Terzaghi, K. (1977). Earth tunneling with steel supports. Commercial Shearing and Stamping Co., Youngstown, OH.

Terzaghi, K (1954). "Anchored Bulkheads," Transactions, ASCE, Vol. 119.

Terzaghi, K. (1950). Geologic aspects of soft ground tunneling. Chapter 1 1 in Applied Sedimentation, R. Task and D. Parker, eds. New York: John Wiley & Sons.

Terzaghi, K. (1946). "Rock Defects and Loads on Tunnel Supports" Rock Tunneling with Steel Support, R. V. Proctor and T. White, Commercial Shearing Co., Youngstown, OH: 15-99.

Terzaghi, K, and R.B. Peck (1967). Soil Mechanics in Engineering Practice, Second Edition, John Wiley and Sons, New York.

Terzaghi, K., and Richart, F. E. (1952). "Stresses in Reek About Cavities, Geotechnique, Vol. 3.

Timoshenko, S. (1936). "Theory of Elastic Stability", McGraw-Hill Book Co., New York.

Timoshenko, S. (1940). Theory of Plates and Shells, McGraw- Hill, New York, Article 3, p. 15, Figure 9.

Transportation Research Board (2006). "Making Transportation Tunnels Safe and Secure", NCHRP Report 525, Vol. 12

Tschebotarioff, G.P. (1962). "Retaining Structures," Foundation Engineering, edited by G.A. Leonards, McGraw-Hill, New York.

U.S. Army Corps of Engineers (USACE) (1997). "Engineering and Design, Tunnels and Shafts in Rock" EM 1 1 10-2-2901, May.

U.S. Army Corps of Engineers (USACE) (1982). "Proceedings of the Third International Symposium on Ground Freezing", U.S. Army Corps of Engineers, Cold Regions Research and Engineering Laboratory, Hanover, NH.

USNCTT (U.S. National Committee on Tunneling Technology). (1984). "Geotechnical Investigations for Underground Projects", National Academy Press, Washington, DC (2 volumes).

USS (1975). Steel Sheet Piling Design Manual, United States Steel, Pittsburgh, PA.

Vandewalle, M., 2005: "Tunneling is an Art". NV Bekaert SA.

Van Dijk, P.A., Taylor, S., and Rice P.M., "Box Jacking in Boston", Proc. North American Tunneling 00, Boston, June 2000.

Van Dijk, P., Almeraris, G. and Rice, P., "Construction of I-90 Highway Tunnels Under Boston’s South Station Rail Yard by Box Jacking, Proc., RETC, San Diego, June 2000, pp. 221-239.

Wahls, H. E. (1981). Tolerable settlement of buildings. Journal of Geotechnical Engineering, 107, ASCE.

Walkinshaw, J., (1992). "Landslide Correction Costs on U.S. State Highway System". Transportation Research Record 1343, National Research Council, Washington D.C., pp.36-41.

Wang, J (1993), Seismic Design of Tunnels - A Simple State-of-the-Art Design Approach, Parsons Brinckerhoff Monograph No. 7.

Whittakar N.B. and Frith, R.C., (1990)"Tunneling, Design, Stability and Construction".

Wickham, G. E., Tiedemann, H. R., and Skinner, E. H. (1972). "Support Determinations Based on Geologic Predictions," Proceedings, First Rapid Excavation and Tunneling Conference, Chicago, VOII.

Wickham, G. E., Tiedemann, H. R., and Skinner, E. H. (1974). "Ground Support Prediction Model - RSR Concept," Proceedings, RETC, AWE, New York 691-707.

Wittke, W., (1984), "Felsmechanik," Springer, Berlin.

Wood, A.M., (2000). "Tunneling, Management by Design "; E & FN Spon, London.

Xanthakos, P. P., L.W. Abramson, and D.A. Bruce (1994). Ground Control and Improvement, New York: John Wiley and Sons, Inc.

Xanthakos, P.P. (1979). Slurry Walls. McGraw-Hill, New York.

Zosen, H.(1984). Hitachi Zosen's Shield Tunneling Machines, Company Brochure, Tokyo.

Zosen, Hitachi (1981). "Shield Tunneling Machines", Company Brochure, Tokyo.

<< Previous Contents Next >>
Updated: 07/31/2013
Federal Highway Administration | 1200 New Jersey Avenue, SE | Washington, DC 20590 | 202-366-4000