Skip to contentUnited States Department of Transportation - Federal Highway AdministrationSearch FHWAFeedback

Construction

Request

Action: Notice, request for comments.

Web posting date: 01/10/2011

Federal Register Notice of Finding Publication Date: 08/15/11

Effective Date of Federal Register: 08/16/11

Close of public comment period: 08/31/11

Summary: The Federal Highway Administration (FHWA) is seeking comments on whether a waiver of the Buy America requirements of 23 CFR 635.410 should be granted to permit the use of non-domestic 1) Galvanized ground bushing (3/4"-4") for electrical system. 2) Form 5/Form 7 condulet body assembly (1.5", 2"). 3) Sealing Locknuts (1.5", 2") in the state of Oregon.

FHWA will only consider a Buy America waiver when the conditions of 23 CFR 635.410( c) have been met: (1) when the application of the provision would be inconsistent with the public interest; or (2) when steel and iron products are not produced in the United States in sufficient and reasonably available quantities, which are of a satisfactory quality.

The FHWA will consider all comments received in the initial 15-day comment period during our evaluation of the waiver request. Comments received after this period, but before notice of our finding is published in the Federal Register, will be considered to the extent practical. Follow-up coordination on the comments received may result in a delay in the publication of our waiver finding in the Federal Register. Comments received during the 15-day comment period after notice of our finding is published in the Federal Register will be reviewed, but the finding will continue to remain valid. Comments received during the comment period after the effective date of the finding will be reviewed, and may influence the FHWA's decision to terminate or modify a finding.

ODOT contact:: Mark Foster; Mark.A.FOSTER@odot.state.or.us Ph. 503-731-8288.

Comments

John Henninger 01/10/2011
Deny the waiver

Thomas Gentry 01/10/2011
Only buy American

John Keusch 01/13/2011
The waiver should be granted. In order to achieve a more fluid and consistant level of putting Americans back to work now should be the highest importance in this country. It is quite obvious that denying the waiver could cause a very apparent slow down in our cointry"s productivity. of employment assembly

Bob 01/21/2011
The sealing locknut can be a washer with a locknut in all states

Solar panels will be washer Lock washer stainless steal nut.

Summary: The Federal Highway Administration (FHWA) is seeking comments on whether a waiver of the Buy America requirements of 23 CFR 635.410 should be granted to permit the use of non-domestic 1) Galvanized ground bushing (3/4"-4") for electrical system. 2) Form 5/Form 7 condulet body assembly (1.5", 2"). 3) Sealing Locknuts (1.5", 2") in the state of Oregon.

Michael Schwartz, PE 04/08/2011
What makes this partticular installation so unique as to justify a waiver. Domestic products should be required!

John Papandrea 04/11/2011
These bushings have been made in the USA for at least a century. Contractors have been tempted with cheaper inferior imports putting substantial pressure upon our manufacturers. They are often substituted when specifications aren't monitored carefully. This request for waiver is totally without credibility and should be declined.

Contact

Edwin Okonkwo
Office of Program Administration
202-366-1558
E-mail Edwin

 
 
PDF files can be viewed with the Acrobat® Reader®
Updated: 05/21/2013
 

FHWA
United States Department of Transportation - Federal Highway Administration