Skip to contentUnited States Department of Transportation - Federal Highway AdministrationFHWA HomeFeedback

Hydraulics Engineering

  
Conferences
Software
Policy & Memos
Research
Publications
Training & Workshops
Staff
Links

Updated Charts for 2001 HDS 5

Charts in Word and .tif format (.zip, 1.0 mb)

Chart 10a Nomograph: Headwater Depth For Inlet Control Rectangular Box Culverts 90° Headwall Chamfered Or Beveled Inlet Edges

Chart 11a Nomograph: Headwater Depth For Inlet Control Single Barrel Box Culverts Skewed Headwalls Chamfered Or Beveled Inlet Edges

Chart 13a Nomograph: Headwater Depth For Inlet Control Rectangular Box Culverts Offset Flared Wingwalls And Beveled Edge At Top Of Inlet

Chart 14a Critical Depth-Rectangular Section. Graphs of Critical Depths- dc(m) vs Q/B.

Chart 35a Nomograph: Headwater Depth For Inlet Control Structural Plate Pipe-Arch Culverts 457mm Radius Corner Plate Projecting Or Headwall Inlet Headwall With Or Without Edge Bevel

Chart 35b Nomograph: Headwater Depth For Inlet Control Structural Plate Pipe-Arch Culverts 18-in. Radius Corner Plate Projecting Or Headwall Inlet Headwall With Or Without Edge Bevel

Chart 58a Nomograph: Face Control For Box Culverts With Side-Tapered Inlets

Chart 59a Nomograph: Face Control For Box Culverts With Slope Tapered Inlets

Word files can be viewed with the Word Viewer
 
Updated: 04/07/2011
Scour Technology | Bridge Hydraulics | Culvert Hydraulics | Highway Drainage | Hydrology | Environmental Hydraulics
FHWA Home | Engineering | Hydraulics Engineering | Feedback

FHWA
United States Department of Transportation - Federal Highway Administration