Skip to content U.S. Department of Transportation/Federal Highway AdministrationU.S. Department of Transportation/Federal Highway Administration

Office of Planning, Environment, & Realty (HEP)
PlanningEnvironmentReal Estate

HEP Events Guidance Publications Awards Contacts

Figure 1: Overview of the Modeling Process

This presents an overview of the modeling process. Click image for full description.

Figure 1: This presents an overview of the modeling process

Define and Begin Process

Goes to: Step 1: Define project details (see section 2)

Goes to either:

Discussion of Inputs

Goes back to Step 1: Define project details (see section 2)

Begin Emissions Modeling

Goes to Step 2: Prepare MOVES input data (see section 3)

Goes to Recheck Inputs

Goes to Build input Files and Run MOVES

Goes to Evaluate Output

Goes to either:

Employ output into CAL3QHC model

Goes to CAL3QHC Modeling

Goes to Step 3: Prepare dispersion modeling input (see section 4)

Goes to Recheck Inputs

Goes to Build input Files and Run CAL3QHC

Goes to Evaluate Output

Goes to either:

Updated: 02/13/2014
HEP Home Planning Environment Real Estate
Federal Highway Administration | 1200 New Jersey Avenue, SE | Washington, DC 20590 | 202-366-4000