U.S. Department of Transportation
Federal Highway Administration

TECHNICAL ADVISORY

T 5080.1
May 18, 1979

Par.

1. Purpose

2. Background

3. Description

4. Recommendation

1. PURPOSE. To provide guidance to engineers involved in making construction inspections on Federal-aid highway projects.

2. BACKGROUND

   1. The Federal Highway Administration (FHWA), through FHPM 6-4-2-8, Inspection of Federal-aid Construction Projects, requires sufficient inspection of Federal-aid highway construction work to assure that each project is completed in reasonably close conformance with the approved plans and specifications, including authorized changes and extra work. Furthermore, FHWA is chargedwith the responsibility to evaluate the performance, adequacy, and effectiveness of the State highway agencies in controlling the quality of such work.

   2. The FHWA field personnel involved in highway construction inspections have the responsibility of evaluating construction activities and procedures to assure a quality product. With smaller projects being awarded and the increasing number of nonconstruction items requiring coverage, the FHWA field engineer must manage available time in the most efficient and effective manner to accomplish this responsibility.

3. DESCRIPTION

   1. Within highway construction projects, there are certain types of construction elements that contribute to the end product. Proper design and satisfactory construction of these elements will generally result in a product that will perform at the desired level of service.

   2. A list of key construction elements, including quality factors within those elements, have been developed. The attached table addresses six highway construction elements including bituminous pavement, rigid pavement, bridge deck, structural concrete, base course, and embankment construction. The quality factors are items that were identified by selected FHWA field and Washington Headquarters personnel and affect the durability and continued satisfactory performance of a product.

4. RECOMMENDATION

   1. The foremost goal of a construction inspection is to provide a quality highway product. It is important that engineers making construction inspections use their knowledge of local circumstances to determine where their available inspection time would be most productive. Therefore, it is recommended that the attached table be used as a management tool to supplement the engineer's plan in performing quality construction inspections.

   2. In the table below, the quality factors are shown in three groups for each construction element. The groupings represent an order of significance. For the engineer's consideration in managing available inspection time, it is recommended that those quality factors listed in Group I be considered for inspection first. If a more detailed inspection is being conducted, the engineer should expand the inspection to include those quality factors listed in Groups II and III.

/S/
R. D. Morgan
Associate Administrator for
Engineering and Traffic Operations

KEY CONSTRUCTION ELEMENTS AND QUALITY FACTORS