Number | Description |
---|---|

0001.0 | The year of record must be greater than 1900.
Condition: The year_record (1) field is less than
1900. |

0002.0 | State code must be a valid FIPS code.Condition: The state_code (2) field is not a valid
state code. |

0003.0 | Route ID must be a nonzero alphanumeric value.Condition: The route_id (3) field blank or equal to
0. |

0004.0 | Begin point must not be less than zero.Condition: The begin_point (4) field is less than 0. |

0005.0 | End point must not be less than zero.Condition: The end_point (5) field is less than 0. |

0006.0 | Section length must be greater than zero.Condition: The section_length (6) field is not
greater than 0. |

0007.0 | Functional System must be a value in the range [1-7].Condition: The f_system (7) field is less than 1 or
greater than 7. |

0009.0 | Facility Type must be a value in the range [1-6].Condition: The facility_type (9) field is less than
1 or greater than 6. |

0010.0 | Structure Type must be a value in the range [0-3].Condition: The structure_type (10) field is less
than 0 or greater than 3. |

0013.0 | Number of Through Lanes must not be less than one.Condition: The through_lanes (13) field is less than
1. |

0020.0 | Speed Limit must be greater than zero and should be
divisible by 5.Condition: The speed_limit (20) field is not greater
than 0 and divisible by 5. |

0026.0 | AADT must not be less than zero.Condition: The aadt (26) field is less than 0. |

0027.0 | AADT for Single-Unit Trucks must not be less than zero.Condition: The aadt_single_unit (27) field is less
than 0. |

0029.0 | AADT for Combination Trucks must not be less than zero.Condition: The aadt_combination (29) field is less
than 0. |

0033.0 | Future AADT must be greater than zero.Condition: The future_aadt (33) field is not greater
than 0. |

0040.0 | Lane Width should be a value from 6 to 18 feet.Condition: The lane_width (40) field is less than 6
or greater than 18. |

0043.0 | Shoulder Type must be a value in the range [1-7].Condition: The shoulder_type (43) field is less than
1 or greater than 7. |

0063.0 | IRI must contain a value from 0 to 955.Condition: The iri (63) field is less than 0 or
greater than 955. |

0064.0 | PSR must contain a value from 0.0 to 5.0.Condition: The psr (64) field is less than 0.0 or
greater than 5.0. |

0065.0 | Surface Type must be a value in the range [1-11].Condition: The surface_type (65) field is less than
1 or greater than 11. |

0066.0 | Rutting must not be less than zero.Condition: The rutting (66) field is less than 0. |

0067.0 | Faulting must not be less than zero.Condition: The faulting (67) field is less than 0. |

0068.0 | Cracking Percent must not be less than 0 or greater than
100.Condition: The cracking_percent (68) field is less
than 0 or greater than 100. |

0069.0 | Cracking Length must not be less than zero.Condition: The cracking_length (69) field is less
than 0. |

0071.0 | The year of construction must be greater than 1900.Condition: The year_last_construction (71) field is
less than 1900. |

0072.0 | Last Overlay Thickness must not be less than zero.Condition: The last_overlay_thickness (72) field is
less than 0. |

0073.0 | Rigid Pavement Thickness must not be less than zero.Condition: The thickness_rigid (73) field is less
than 0. |

0074.0 | Flexible Pavement Thickness must not be less than zero.Condition: The thickness_flexible (74) field is less
than 0. |

0075.0 | Base Type must be a value in the range [1-8].Condition: The base_type (75) field is less than 1
or greater than 8. |

0076.0 | Base Pavement Thickness must not be less than zero.Condition: The base_thickness (76) field is less
than 0. |

0077.0 | Climate Zone must be a value in the range [1-4].Condition: The climate_zone (77) field is less than
1 or greater than 4. |

0078.0 | Soil Type must be a value in the range [1-2].Condition: The soil_type (78) field is less than 1
or greater than 2. |

0079.0 | County code must be a valid FIPS code.Condition: The county_code (79) field is not a valid
county code. |

0089.0 | Volume Group must be a value in the range [1-12].Condition: The volume_group (89) field is less than
1 or greater than 12. |

0090.0 | Expansion Factor must not be less than one.Condition: The expansion_factor (90) field is less
than 1. |

Number | Description |
---|---|

1005.0 | End point must be greater than the Begin point.Condition: The end_point (5) field is not greater
than the begin_point (4) field. |

1006.0 | The Section Length must equal the distance between the
begin and end points within 0.1 miles.Condition: The end_point (5) field minus the begin_point
(4) field does not equal the section_length (6) filed plus or minus 0.1
miles. |

1009.0 | Interstate should not be a one-way facility.Condition: The facility_type (9) field equals 1
(one-way) ANDThe f_system (7) field equals 1 (interstate). |

1013.0 | Number of Through Lanes must not be zero when the
functional system is less than [6].Condition: The through_lanes (13) field equals 0 ANDThe f_system (7) field does NOT equal 6 (minor
collector) or 7 (local). |

1013.1 | Number of Through Lanes should be two or more for a paved
two-way facility.Condition: The through_lanes (13) field is less than
2 ANDThe facility_type (9) field equals 2 (two-way)
ANDThe surface_type (65) field does NOT equal 1
(unpaved) |

1020.1 | Low Speed Limit of less than 50 MPH on an interstate.Condition: The speed_limit (20) field is less than
50 ANDThe f_system (7) field equals 1 (interstate). |

1026.0 | AADT must not be less than the sum of the single-unit and
combination truck AADT.Condition: The aadt (26) is less than the sum of aadt_single_unit
(27) and aadt_combination (29). |

1026.1 | AADT must not be zero when the facility is an interstate,
freeway or principal arterial.Condition: The aadt (26) field equals to zero ANDThe f_system (7) field equals 1 or 2
(interstate or freeway) or 3 (principal arterial). |

1026.2 | Low AADT on interstate of less than 1000.Condition: The aadt (26) field is less than 1000 ANDThe f_system (7) field equals 1 (interstate). |

1026.3 | Low AADT of less than 500 per lane with more than 4
through lanes.Condition: The aadt (26) field divided by through_lanes
(13) is less than 500 ANDThe through_lanes (13) is greater than 4. |

1027.0 | The sum of the single-unit and combination truck AADT must
not be zero on an interstate.Condition: The sum of aadt_single_unit (27) and aadt_combination
(29) equals zero ANDThe f_system (7) field equals 1 (interstate). |

1033.0 | Future AADT growth is more than 4 times or less than 0.4
times the AADT.Condition: The future_aadt (33) field is greater
than aadt (26) times 4 or less than aadt (26) times 0.4. |

1033.1 | Future AADT has the same value as the AADT.Condition: The future_aadt (33) field equals the aadt
(26) field. |

1034.0 | Future AADT year should be between 18 and 25 years beyond
the Year-of-Record.Condition: The future_aadt_year (34) is less than
the year_record (1) plus 18 ORThe future_aadt_year (34) is greater than year_record
(1) plus 25. |

1043.0 | Shoulder Type is none or earth on Interstate.Condition: The shoulder_type (43) field equals 1
(none) or 6 (earth) ANDThe f_system (7) equals 1 (interstate). |

1063.0 | IRI should not be zero when the facility is paved.Condition: The iri (63) equals zero ANDThe surface_type (65) is greater than 1
(paved). |

1063.1 | IRI should be zero when the facility is unpaved.Condition: The iri (63) is NOT zero ANDThe surface_type (65) field equals 1
(unpaved). |

1063.2 | Facility has an extremely low IRI of less than 30.Condition: The iri (63) field is less than 30 and
NOT equal to zero. |

1063.3 | Facility has an extremely high IRI of greater than 400.Condition: The iri (63) field is greater than 400. |

1064.0 | PSR should not be zero when the facility is paved and IRI
is zero.Condition: The psr (64) is zero ANDThe surface_type (65) is greater than 1
(paved) ANDThe iri (63) field is zero. |

1064.1 | PSR should be zero when the facility is unpaved.Condition: The psr (64) is does NOT equal zero ANDThe surface_type (65) field equals 1
(unpaved). |

1065.0 | Unpaved facility on an interstate, freeway or principal
arterial.Condition: The surface_type (65) field equals 1
(unpaved) ANDThe f_system (7) field equals 1 or 2
(interstate or freeway) or 3 (principal arterial). |

1066.0 | Rutting is not a distress for a rigid surface.Condition: The rutting (66) field data is provided
ANDThe surface_type (65) field equals 3, 4, 5, 9
or 10 (rigid). |

1066.1 | Rutting must be provided for a flexible or composite
surface.Condition: The rutting (66) field data is NOT
provided ANDThe surface_type (65) field equals 2, 6, 7 or
8 (flexible or composite). |

1067.0 | Faulting is not a distress for a flexible or composite
surface.Condition: The faulting (67) field data is provided
ANDThe surface_type (65) field equals 2, 6, 7 or
8 (flexible or composite). |

1067.1 | Faulting must be provided for a rigid surface.Condition: The faulting (67) field data is NOT
provided ANDThe surface_type (65) field equals 3, 4, 5, 9
or 10 (rigid). |

1068.0 | Cracking percent must be provided for a rigid, flexible or
composite surface.Condition: The cracking_percent (68) field data is
NOT provided ANDThe surface_type (65) field equals 2, 3, 4, 5,
6, 7, 8, 9 or 10 (rigid, flexible and composite). |

1069.0 | Cracking length is not a distress for a rigid surface.Condition: The cracking_length (69) field data is
provided ANDThe surface_type (65) field equals 3, 4, 5, 9
or 10 (rigid). |

1069.1 | Cracking length must be provided for a flexible or
composite surface.Condition: The cracking_length (69) field data is
NOT provided ANDThe surface_type (65) field equals 2, 6, 7 or
8 (flexible or composite). |

1070.0 | The year of last improvement must not be less than the
year of last construction.Condition: The year_last_improv (70) field is
greater than 0 ANDThe year_last_improv (70) field is less than
the year_last_construction (71) field. |

1070.1 | The year of last improvement must not be greater than the
year of record.Condition: The year_last_improv (70) field is
greater than the year_record (1) field. |

1070.2 | The year of last improvement must be provided when an
overlay exists.Condition: The year_last_improv (70) field is NOT greater
than zero ANDThe surface_type (65) field equals 6, 7 or 8
(overlay). |

1070.3 | The year of last improvement must equal the year of
construction when no overlay exists.Condition: The year_last_improv (70) field is
greater than zero ANDThe year_last_improv (70) field does NOT equal
the year_last_construction (71) field ANDThe surface_type (65) field 1, 2, 3, 4, 5, 9,
10 or 11 (no overlay). |

1071.0 | The year of last construction must not be greater than the
year of record.Condition: The year_last_construction (71) field is
greater than the year_record (1) field. |

1072.0 | The last overlay thickness must be greater than zero if an
overlay has been applied.Condition: The last_overlay_thickness (72) field is NOT
greater than 0 ANDThe surface_type (65) field equals 6, 7 or 8
(overlay). |

1072.1 | The last overlay thickness must be zero when no overlay
has been applied.Condition: The last_overlay_thickness (72) field is greater
than 0 ANDThe surface_type (65) field equals 1, 2, 3, 4,
5, 9, 10 or 11 (no overlay). |

1072.2 | Unusual last overlay thickness of less than 1 or greater
than 8 inches.Condition: The last_overlay_thickness (72) field is less
than 1 OR greater than 8 ANDThe surface_type (65) field equals 6, 7 or 8
(overlay). |

1073.0 | Rigid Pavement Thickness should not be provided for a flexible
surface.Condition: The thickness_rigid (73) is greater than
0 ANDThe surface_type (65) field is 2 or 6 (flexible). |

1073.1 | Rigid Pavement Thickness must be provided for a rigid or
composite surface.Condition: The thickness_rigid (73) is NOT greater
than 0 ANDThe surface_type (65) field is 3, 4, 5, 7, 8,
9, or 10 (rigid or composite). |

1073.2 | Rigid Pavement Thickness should be between 6 and 16 inches
for a rigid surface.Condition: The thickness_rigid (73) is less than 6
OR greater than 16 AND.The surface_type (65) field is 3, 4, 5, 9, or 10
or 10
(rigid). |

1074.0 | Flexible Pavement Thickness should not be specified for a rigid
or composite surface.Condition: The thickness_flexible (74) is greater
than 0 ANDThe surface_type (65) field is 3, 4, 5, 7, 8,
9, or 10 (rigid or composite). |

1074.1 | Flexible Pavement Thickness must be provided for a flexible
surface.Condition: The thickness_flexible (74) is NOT greater
than 0 ANDThe surface_type (65) field is 2 or 6 (flexible). |

1074.2 | Flexible Pavement Thickness should be between 2 and 24
inches for a flexible surface.Condition: The thickness_flexible (74) is less than
2 OR greater than 24 ANDThe surface_type (65) field is 2 or 6 (flexible). |

1076.0 | Base Thickness must not be specified when the base type is
none.Condition: The base_thickness (76) field is greater
than 0 ANDThe base_type (75) field equals 1 (none). |

1076.1 | Base Thickness must be specified when the when a pavement
base is present.Condition: The base_thickness (76) field is NOT greater
than 0 ANDThe base_type (75) field is greater than 1 (has
base). |

Updated: 11/22/2013