Skip to contentUnited States Department of Transportation - Federal Highway AdministrationSearch FHWAFeedback

Pavements

 

Need 3: Pavement Management System Tools Techniques

The following boxes are specific product projects that fall under Need 3. To see the detailed product statement, click on the corresponding box.

FWD Calibration Procedures Introduced: 1991 ETG: Materials Current Product Phase: Supported Expected Phase Completion: N/A Funding Required: $3,500

Guidelines for Conducting Distress Surveys Responsible Agency: FHWA Funding Required: $0 ETG: Distress Profile Current Product Phase: Identify Introduced: 2000 Expected Phase Completion: N/A

Guidelines for Determining (Characterizing) As-Built Material Properties Introduced: 2000 ETG: Materials Current Product Phase: Identify Expected Phase Completion: N/A Funding Required: $0

Guidelines for Temperature Adjustment of FWD Results for AC Pavements Responsible Agency: FHWA Funding Required: $0 ETG: Materials Current Product Phase: Supported Introduced: 2001 Expected Phase Completion: N/A

Verification of Dynamic Test System - Emphasis on Resilient Modulus Introduced: 2001 ETG: Materials Current Product Phase: Delivery Expected Phase Completion: 12/31/2001 Funding Required: $0

Guide for Improving the Quality of Profile Measurements Responsible Agency: FHWA Funding Required: $40,000 ETG: Distress Profile Current Product Phase: Proposed Introduced: 2002 Expected Phase Completion: N/A

ProVal version 1.0 Responsible Agency: FHWA Funding Required: $20,000 ETG: Distress Profile Current Product Phase: Supported Introduced: 2001 Expected Phase Completion: 12/15/02

Software for Verifying FWD Sensor Spacing Introduced: 1999 ETG: Materials Current Product Phase: Development Expected Phase Completion: N/A Funding Required: $0

Profile Smoothness Index Relationships Responsible Agency: FHWA Funding Required: $0 ETG: Distress Profile Current Product Phase: Supported Introduced: 2002 Expected Phase Completion: 1/1/03

2003 Distress Identification Manual Responsible Agency: FHWA Funding Required: $25,000 ETG: Distress Profile Current Product Phase: Supported Introduced: 2002 Expected Phase Completion: 10/31/03

Integrating Conditions Measurement Variability in Network Pavement Management Systems Responsible Agency: FHWA Funding Required: $299,982 ETG: N/A Current Product Phase: Proposed Introduced: 2002 Expected Phase Completion: 12/31/04

ProVal version 2.0 Responsible Agency: FHWA Funding Required: $100,000 ETG: Distress Profile Current Product Phase: Development Introduced: 2003 Expected Phase Completion: 8/1/04
 
This page last modified on 07/14/06
  
FHWA Home | Engineering | Pavements

FHWA
United States Department of Transportation - Federal Highway Administration