Skip to contentUnited States Department of Transportation - Federal Highway Administration FHWA Home
Research Home
Public Roads
Featuring developments in Federal highway policies, programs, and research and technology.
This magazine is an archived publication and may contain dated technical, contact, and link information.
Federal Highway Administration > Publications > Public Roads > Vol. 69 · No. 4 > National Highway Institute(NHI)

Jan/Feb 2006
Vol. 69 · No. 4

Publication Number: FHWA-HRT-2006-002

National Highway Institute(NHI)

Training Update

New Course Addresses Design and Construction of Micropiles

Micropiles, which are often used in foundations to resist static and seismic loading in highway infrastructure, are a relatively new technology for which design and construction methodologies have only recently been fully developed. Also used as in situ reinforcements for slope and excavation stability, micropile technology is particularly applicable in situations where access is difficult or overhead clearance is limited.

To offer training in this emerging technology, the Federal Highway Administration's (FHWA) National Highway Institute (NHI), the International Association of Foundation Drilling, and the International Society on Micropiles recently teamed up to develop a new course, Micropile Design and Construction (#132078A). Neither NHI nor any other associated organization has offered a similar course before.

"The purpose for developing and delivering this course and the accompanying Federal Highway Administration Micropile Design and Construction Guidelines [FHWA-NHI-05-039] is to provide 'practitioner-oriented' technical guidance," says Barry D. Siel, P.E., senior geotechnical engineer with the FHWA Resource Center.

The course targets practicing geotechnical, foundation, construction, and bridge/structural engineers who have knowledge and experience in the design and construction of driven piles and drilled shaft foundations. Further, the course builds upon the basic concepts presented in the NHI Soils and Foundations Workshop (#132012A), Drilled Shafts (#132014A), and Driven Pile Foundations--Design and Construction (#132021A) courses. Note that the Soils and Foundations Workshop is a recommended prerequisite.

Upon completion of this course, participants will be able to briefly describe the history and current status of the micropile industry; identify potential micropile applications; explain construction constraints, techniques, and performance; assess the feasibility of micropiles for a given application; prepare conceptual and basic designs and evaluate contractor-submitted designs; select appropriate specifications and contracting methods and prepare contract documents; and describe requirements for construction monitoring and inspection.

For course scheduling, contact the NHI Training Team at 703-235-0528 or NHITraining@fhwa.dot.gov. For more information, visit NHI's Web site at www.nhi.fhwa.dot.gov.

This figure shows a typical micropile in cross section with a hypothetical footing and subsurface profile. The micropile components are labeled, including the reinforcing bar, casing, centralizer, grout, and pile cap anchorage. Also shown are design dimensions including bond length, plunge length, and bond zone diameter.
This figure shows a typical micropile in cross section with a hypothetical footing and subsurface profile. The micropile components are labeled, including the reinforcing bar, casing, centralizer, grout, and pile cap anchorage. Also shown are design dimensions including bond length, plunge length, and bond zone diameter.
Source: Micropile Design and Construction Guidelines, FHWANHI- 05-039.


Reporting Changes Of Address PUBLIC ROADS has two categories of subscribers. One includes the organizations and people who receive the magazine without charge; the editorial office of the magazine maintains the mailing list for this group. The other category is the group of people and companies that pay to receive the magazine; the mailing list for this group is maintained by the Superintendent of Documents for the U.S. Government Printing Office.

Free copies are distributed to offices of the Federal Highway Administration, State highway agencies, technology transfer centers, and selected leaders who have a responsibility for highway-related issues. Most of these copies are mailed to offices for their internal distribution or to people by position title rather than by name. If any office or individual subscriber in this category has a change of address, please send the complete previous mailing address and the complete new address to our distribution manager, Martha Soneira, via e-mail (martha.soneira@fhwa.dot.gov), telephone (202-493-3468), or mail (Martha Soneira, PUBLIC ROADS Distribution Manager (HRTS), Federal Highway Administration, 6300 Georgetown Pike, McLean, VA, 22101-2296).

Paid subscribers who have an address change should notify the U.S. Government Printing Office, Claims Office, Washington, DC, 20402; or call 202-512-1800; or fax 202-512-2168. Please do not send an address change for a paid subscription to the editorial office of PUBLIC ROADS. We do not manage the paid subscription program or mailing list, and we are not able to make the requested change.

ResearchFHWA
FHWA
United States Department of Transportation - Federal Highway Administration