Skip to contentUnited States Department of Transportation - Federal Highway Administration FHWA Home
Research Home
REPORT
This report is an archived publication and may contain dated technical, contact, and link information
Publication Number: FHWA-HRT-12-027
Date: May 2012

 

Evaluation of State Quality Assurance Program Effectiveness

REFERENCES

  1. Pathomvanich, S., Najafi, F.T., and Kopac, P.A. (2002). "Procedure for Monitoring and Improving Effectiveness of Quality Assurance Specifications," Transportation Research Record 1813, Washington DC.

  2. Hughes, C.S. (2005). "State Construction Quality Assurance Programs," Transportation Research Board Synthesis 346, 75, Washington DC.

  3. Office of Infrastructure Research and Development. (2008). Analysis of Risks in Percent within Limits and Percent Defective Acceptance Plans and Specifications SpecRisk User’s Manual Version 2.4, Federal Highway Administration, Washington, DC.

  4. AASHTO T-22. (2011). "Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens," Standard Specifications for Transportation Materials and Methods of Sampling and Testing, 31st Edition, American Association of State Highway and Transportation Officials, Washington, DC.

  5. ASTM C-192. (2009). "Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory," Annual Book of ASTM Standards Volume 04.02, ASTM International, West Conshohocken, PA.

  6. AASHTO Joint Construction/Materials Quality Assurance Task Force. (1995). AASHTO Quality Assurance Guide Specification, American Association of State Highway and Transportation Officials, Washington, DC.

  7. AASHTO Joint Construction/Materials Quality Assurance Task Force. (1995). AASHTO Quality Assurance Implementation Guide, American Association of State Highway and Transportation Officials, Washington, DC.
ResearchFHWA
FHWA
United States Department of Transportation - Federal Highway Administration