U.S. Department of Transportation
Federal Highway Administration
1200 New Jersey Avenue, SE
Washington, DC 20590
202-366-4000


Skip to content
Facebook iconYouTube iconTwitter iconFlickr iconLinkedInInstagram

Federal Highway Administration Research and Technology
Coordinating, Developing, and Delivering Highway Transportation Innovations

Report
This report is an archived publication and may contain dated technical, contact, and link information
Publication Number: FHWA-HRT-11-046
Date: June 2011

Performance Evaluation of One-Coat Systems for New Steel Bridges

REFERENCES

  1. Kogler, B. (2008). "Managing the Infrastructure: The Role of Cost Knowledge," Journal of Protective Coatings and Linings, 20-31.

  2. Kline, E.S. (2008). "Steel Bridge: Corrosion Protection for 100 Years," Journal of Protective Coatings and Linings, 22-31.

  3. Federal Highway Administration. (1995). Issues Impacting Bridge Painting, Report No. FHWA-RD-94-098, Federal Highway Administration, Washington, DC.

  4. Chong, S-L. and Yao, Y. (2006). "Are Two Coat as Effective as Three?," Public Roads, 70(2).

  5. Kline, E.S. and Corbett, W.D. (2007). "Completion of Phase I of the Single-Coat Research," Journal of Protective Coatings and Linings, 17-18.

  6. ASTM B0117-09. (2010). "Practice for Operating Salt Spray (Fog) Apparatus," Annual Book of ASTM Standards, Volume 03.02, ASTM International, West Conshohocken, PA.

  7. ASTM D5894-05. (2010). "Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)," Annual Book of ASTM Standards, Volume 06.01, ASTM International, West Conshohocken, PA.

  8. Richard, S.H. (1995). "Research News: New England DOTs Develop Program for Selecting Coating Systems," Journal of Protective Coatings and Linings, 17-39.

  9. Chong, S-L., Jacoby, M., Boone, J., and Lum, H. (1995). Comparison of Laboratory Testing Methods for Bridge Coatings, Report No. FHWA-RD-94-112, Federal Highway Administration, Washington, DC.

  10. Ault, J.P. and Farschon, C.L. (2009). "20-Year Performance of Bridge & Maintenance Systems," Journal of Protective Coatings and Linings, 16-32.

  11. Chong, S-L. and Yao, Y. (2003). Laboratory Evaluation of Waterborne Coatings on Steel, Report No. FHWA-RD-03-032, Federal Highway Administration, Washington, DC.

  12. Angeloff, C., Squiller, E.P., and Best, K.E. (2002). "Two-Component Aliphatic Polyurea Coatings for High Productivity Applications," Journal of Protective Coatings and Linings, 42–46.

  13. Chong, S-L. and Yao, Y. (2007). "Selecting Overcoats for Bridges," Public Roads, 71(2).

  14. Mowrer, N.R. (2005). Polysiloxane Coating Innovations, PPG Protective & Marine Coatings, Pittsburgh, PA. Obtained from: http://ppgamercoatus.ppgpmc.com/techcenter/resources. cfm?resource=2. Site last accessed May 12, 2011.

  15. SSPC-SP-10. (2007). The Society for Protective Coatings Surface Preparation Specification Near-White Metal Blast Cleaning, The Society for Protective Coatings, Pittsburgh, PA.

  16. ASTM D1654-08. (2010). "Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments," Annual Book of ASTM Standards, Volume 06.01, ASTM International, West Conshohocken, PA.

  17. ASTM G85-09. (2010). "Standard Practice for Modified Salt Spray (Fog) Testing," Annual Book of ASTM Standards, Volume 03.02, ASTM International, West Conshohocken, PA.

  18. Ault, P., Ellor, J., Repp, J., and Shaw, B. (2000). Characterization of the Environment, Report No. FHWA-RD-00-030, Federal Highway Administration, Washington, DC.

  19. ASTM D2369-10. (2010). "Standard Test Method for Volatile Content of Coatings," Annual Book of ASTM Standards, Volume 06.01, ASTM International, West Conshohocken, PA.

  20. ASTM D2371-85. (2010). "Standard Test Method for Pigment Content of Solvent-Reducible Paints," Annual Book of ASTM Standards, Volume 06.01, ASTM International, West Conshohocken, PA.

  21. ASTM D3723-05e1. (2010). "Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing," Annual Book of ASTM Standards, Volume 06.01, ASTM International, West Conshohocken, PA.

  22. ASTM D4400-99. (2010). "Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator," Annual Book of ASTM Standards, Volume 06.02, ASTM International, West Conshohocken, PA.

  23. ASTM D1640-03. (2010). "Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature," Annual Book of ASTM Standards, Volume 06.01, ASTM International, West Conshohocken, PA.

  24. SSPC-SP-2. (1982). The Society for Protective Coatings Surface Preparation Specification No. 2 Hand Tool Cleaning, The Society for Protective Coatings, Pittsburgh, PA.

  25. Nadal, M.E. (2001). "NIST Reference Goniophotometer for Specular Gloss Measurements," Journal of Coatings Technology, 73(917), 73-80.

  26. ASTM D523-08. (2010). "Standard Test Method for Specular Gloss," Annual Book of ASTM Standards, Volume 06.01, ASTM International, West Conshohocken, PA.

  27. ASTM D2244-09A. (2010). "Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates," Annual Book of ASTM Standards, Volume 06.01, ASTM International, West Conshohocken, PA.

  28. ASTM D3363-05. (2010). "Standard Test Method for Film Hardness by Pencil Test," Annual Book of ASTM Standards, Volume 06.01, ASTM International, West Conshohocken, PA.

  29. ASTM D4541-09. (2010). "Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers," Annual Book of ASTM Standards, Volume 06.02, ASTM International, West Conshohocken, PA.

  30. ASTM D5162-08. (2010). "Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates," Annual Book of ASTM Standards, Volume 06.02, ASTM International, West Conshohocken, PA.

  31. ASTM D714–02. (2010). "Standard Test Method for Evaluating Degree of Blistering of Paints," Annual Book of ASTM Standards, Volume 06.01, ASTM International, West Conshohocken, PA
    .
  32. ASTM D610–08. (2010). "Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces," Annual Book of ASTM Standards, Volume 06.02, ASTM International, West Conshohocken, PA.

  33. ASTM D7087-05A. (2010). "Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments," Annual Book of ASTM Standards, Volume 06.01, ASTM International, West Conshohocken, PA.

  34. Hare, C.H. (1994). Protective Coatings: Fundamentals of Chemistry and Compositions, SSPC Publication, Pittsburgh, PA.

  35. Hare, C.H. (2001). Paint Film Degradation: Mechanisms & Control, SSPC Publication, Pittsburgh, PA.

  36. Brockman, W. (1981). Durability of Metal Polymer Bonds in Adhesion Aspects of Polymeric Coatings, Proceedings of the Symposium on Adhesion Aspects of Polymeric Coatings, Minneapolis, MN.
Federal Highway Administration | 1200 New Jersey Avenue, SE | Washington, DC 20590 | 202-366-4000
Turner-Fairbank Highway Research Center | 6300 Georgetown Pike | McLean, VA | 22101