Skip to contentUnited States Department of Transportation - Federal Highway Administration FHWA Home
Research Home   |   Geotechnical Home
Report
This report is an archived publication and may contain dated technical, contact, and link information

Publication Number: FHWA-RD-03-089
Date: September 2005

Dynamic Bridge Substructure Evaluation and Monitoring

Previous | Table of Contents | Next

References

  1. Lagasse, P.F., P.L. Thompson, and S.A. Sabol (1995) "Guarding Against Scour," Civil Engineering Magazine, 65(6), 56—59.

  2. Egri, R., G. Henderson, A. Lichtenstein, S. Madanat, and K. Maser (1995) "Development of a Wireless Global Bridge Evaluation and Monitoring System: Literature Review," FHWA Contract No. DTFH61-94-C-00217.

  3. Aktan, A.E., C. Chuntavan, K.L. Lee, and T. Toksoy (1993) "Structural Identification of a Steel-Stringer Bridge for Nondestructive Evaluation," Transportation Research Record, Number 1393, 1—36.

  4. Olson, L.D., F. Jalinoos, and M.F. Aouad (1995) "Determination of Unknown Subsurface Bridge Foundations," Research Report NCHRP 21—5.

  5. Huang, N.E., Z. Shen, S.R. Long, M.C. Wu, H.S. Shih, Q. Zheng, N-C. Yen, C.C. Tung, and H.H. Liu (1998) "The Empirical Mode Decomposition and Hilbert Spectrum for Nonlinear and Non-Stationary Time Series Analysis," Proceedings of the Royal Society of London, A 454, 903—995.

  6. Bay, J.A., K.H. Stokoe II, and J.D. Jackson (1995) "Development of a Rolling Dynamic Deflectometer," Transportation Research Record, Number 1473, 43—54.

  7. Chase, S.B. (1995) "FHWA NDE Contract Research, an Overview," Presentation at North American Workshop on Instrumentation and Vibration Analysis of Highway Bridges, Cincinnati, OH.

  8. FHWA (2004) Performance and Accomplishments Report, Pub. No. FHWA-HPL-05-009, Washington, DC.

  9. Cantieni, R. (1992) "Dynamic Behavior of Highway Bridges Under the Passage of Heavy Vehicles," Swiss Federal Laboratories for Materials Testing and Research, Dübendorf, Switzerland.

  10. Richardson, E.V., and S.R. Davis (1995) Evaluating Scour at Bridges, Pub. No. FHWAIP-90-017, Hydraulic Engineering Circular Number 18.

  11. Chang, F.M. (1973) "A Statistical Summary of the Cause and Cost of Bridge Failures," FHWA-RD-75-87, FHWA, NTIS Number PB 224091, September.

  12. Lagasse, P.F., C.F. Nordin, G.V. Sabol, and J.D. Schall (1991) "Scour Monitoring Devices for Bridges," Transportation Research Record, Number 1290, 281—294.

  13. Meadowcroft, I.C., and J.E. Whitbread (1993) "Assessment and Monitoring of Bridges for Scour," Proceedings of the Bridge Management 2nd International Conference, Guildford, UK.

  14. International Association for Bridge and Structural Engineering (IABSE) (1983) "Ship Collision with Bridges and Offshore Structures," Preliminary Report, IABSE Colloquium, Copenhagen, Denmark.

  15. Subcommittee on Coast Guard and Navigation, U.S. House of Representatives (1993) "On the Safety of the Inland Tug and Barge Industry and Investigate the Circumstances Surrounding Two Fatal Bridge Accidents Involving this Industry," 103rd Congress.

  16. Roeder, C., and S. Moorty (1992) "Thermal Movements in Bridges," Transportation Research Record, Number 1290, Transportation Research Board, National Research Council, Washington, DC, 135—143.

  17. Raghavendrachar, M., and A.E. Aktan (1992) "Flexibility by Multi-Reference Impact Testing for Bridge Diagnostics," Journal of Structural Engineering, American Society of Civil Engineers (ASCE), 2186—2203.

  18. Aktan, A.E., and A.J. Helmicki (1995) "Instrumentation, Testing, and Monitoring of Reinforced Deck-on-Steel Girder Bridges: Mid-Term Project Report," Report No.UCCII94, FHWA/ODOT Contract No. 7665, College of Engineering, University of Cincinnati, OH.

  19. Shelley, S.J., K.L. Lee, T. Aksel, and A.E. Aktan (1995) "Active Control and Forced Vibration Studies on a Highway Bridge," Journal of Structural Engineering, ASCE, 121(9), 1306—1312.

  20. Warren, G.E., and L.J. Malvar (1993) "Structural Assessment of Reinforced Concrete Piers Using the Impact Load Method," Proceedings of the International Conference on Nondestructive Testing of Concrete in the Infrastructure, Dearborn, MI, 378—390.

  21. Eberhard, M.O., G. Hjartarson, J.A. MacLardy, and M.L. Marsh (1993) Lateral-Load Response of a Reinforced Concrete Bridge, WA-RD 305.2. Final Report, U.S. Department of Transportation, Washington, DC.

  22. Pierce, C.E., and C.H. Dowding (1995) Long-Term Monitoring of Bridge Pier Integrity with Time Domain Reflectometry Cables, Northwestern University, Evanston, IL.

  23. Sandford, T.C., and M. Elgaaly (1993) "Skew Effects on Backfill Pressures at Frame Bridge Abutments," Transportation Research Record, Number 1415, Transportation Research Board, Washington, DC, 1—11.

  24. Hussein, M., G. Likins, and G.G. Goble (1993) "Determination of Pile Lengths Under Existing Structures," Deep Foundations Institutes’ 17th Annual Members Conference, New Orleans, LA.

  25. Finno, J.R., and J.P. Prommer (1994) Evaluation of Inaccessible Drilled Shafts Using the Impulse Response Method, ITI Technical Report #3, Northwestern University, Evanston, IL.

  26. Chen, S., and Y.R. Kim (1996) "Condition Assessment of Marine Timber Piles Using Stress Wave Method," Building an International Community of Structural Engineers, Proceedings of the Structures Congress XIV, 2, 853—860.

  27. Olson, L.D., and M.F. Aouad (2001) Unknown Subsurface Bridge Foundation Testing, NCHRP 21-5(2), Final Report.

  28. Halling, M.W., I. Muhammad, and K.C. Womack (2001) "Dynamic Field Testing for Condition Assessment of Bridge Bents," Journal of Structural Engineering, Vol. 127(2), 161—167.

  29. Ewins, D.J. (1985) Modal Testing: Theory and Practice, John Wiley, NY.

  30. Bakht, B., and L. Jaeger (1990) "Bridge Testing—A Surprise Every Time," Journal of Structural Engineering, ASCE, 116(5), 1370—1383.

  31. Aktan, A.E., R. Miller, B. Shahrooz, M. Zwick, M. Heckenmueller, I. Ho, W. Hrinko, and T. Toksoy (1992) Nondestructive and Destructive Testing of a Reinforced Concrete Slab Bridge and Associated Analytical Studies, Report No. FHWA/OH-93/017 and UCCII 92/02. ODOT Contract No.14482, College of Engineering, University of Cincinnati, Cincinnati, OH.

  32. Woodward, C., J. Minor, K. White, and R. Idriss (1994) "Nondestructive Evaluation of Fracture Critical Bridge," Structural Materials Technology, Proceedings of the Nondestructive Testing Conference, Atlantic City, NJ.

  33. Farrar, C.R., W.B. Baker, T.M. Bell, K.M. Cone, T.W. Darling, T.A. Duffey, A. Eklund, and A. Migliori (1994) Dynamic Characterization and Damage Detection in the I-40 Bridge over the Rio Grande, Los Alamos Report LA-12767-MS UC-906, Los Alamos, M.

  34. Salane, H.J., J.W. Baldwin, and R. Duffield (1981) "Dynamics Approach for Monitoring Bridge Deterioration," Transportation Research Record, Number 832, 21—28.

  35. Cawley, P., and R.D. Adams (1979) "The Location of Defects in Structures from Measurements of Natural Frequencies," Journal of Strain Analysis, 4(2), 49-57.

  36. Manning, D.G. (1985) "Detecting Defects and Deterioration in Highway Structures," NCHRP Synthesis of Practice No. 118.

  37. DeWolf, J., D.A. Bagdasarian, and P.N. O’Leary (1992) "Bridge Condition Assessment Using Signatures," Nondestructive Evaluation of Civil Structures and Materials, Conference sponsored by the FHWA and the National Science Foundation, Boulder, CO, 171-179.

  38. Huston, D., and M.G. Gardner-Morse (1993) "Modal Identification of Cable-Stayed Pedestrian Bridge," Journal of Structural Engineering, ASCE, 119(11), 3384-04.

  39. Gregory, A.E., N.C. Yang, and R.C.Y. Young (1985) "Bridge Inspection by Dynamic Loading Technique," Proceedings of the ASCE National Convention, Denver, CO.

  40. Mazurek, D., and J. DeWolf (1990) "Experimental Study of Bridge Monitoring Technique," Journal of Structural Engineering, ASCE, 116(9), 2532-49.

  41. Biswas, M., A.K. Pandex, and M.M. Samman (1990) "Diagnostic Experimental Spectral/Model Analysis of a Highway Bridge," International Journal of Analytical and Experimental Modal Analysis, 5, 33—42.

  42. Salawu, O.S., and C. Williams (1995a) "Bridge Assessment Using Forced-Vibration Testing," Journal of Structural Engineering, ASCE, 121(2), 161—173.

  43. Alampalli, S., and G. Fu (1994) "Instrumentation of Remote and Continuous Monitoring of Structure Conditions," Transportation Research Board preprint No. 94-0261.

  44. Baumgartner, W., and H. Waubke (1993) "Service Life Estimation of Bridges," Proceedings of the Bridge Management 2nd International Conference, Guildford, UK.

  45. Hart, G.C., and J.T.P. Yao, (1977) "System Identification in Structural Dynamics," Journal of Engineering Mechanics Division, ASCE, 103(EM6), 1089—104.

  46. Liu, S.C., and J.T.P. Yao (1978) "Structural Identification Concept," Journal of Structural Division, ASCE, 104(ST12), 1845—858.

  47. Mottershead, J.E., and M.I. Friswell (1993) "Model Updating in Structural Dynamics: A Survey," Journal of Sound and Vibration, 167(2), 347—75.

  48. Ghanem, R., and M. Shinozuka (1995) "Structural-System Identification. I: Theory," Journal of Engineering Mechanics, ASCE, 121(2), 255—264.

  49. Shinozuka, M., and R. Ghanem (1995) "Structural System Identification. II: Experimental Verification," Journal of Engineering Mechanics, ASCE, 121(2), 265—273.

  50. Doebling, S.W., C. R. Farrar, M.B. Prime, and D.W. Shevitz, (1996) Damage Identification and Health Monitoring of Structural and Mechanical Systems from Changes in their Vibration Characteristics: A Literature Review, Report LA: I3070-MS, Los Alamos National Laboratory, Los Alamos, NM.

  51. Sanayei, M., and R.B. Nelson (1986) "Identification of Structural Element Stiffnesses From Incomplete Static Test Data," Society of Automotive Engineers Technical Paper Series, SAE-861793, 7.1248—7.1248.

  52. Sanayei, M., and O. Onipede (1991) "Damage Assessment of Structures Using Static Test Data," American Institute of Aeronautics and Astronautics Journal, 29(7), 1174—1179.

  53. Hajela, P., and F.J. Soeiro (1990b) "Structural Damage Detection Based on Static and Modal Analysis," American Institute of Aeronautics and Astronautics Journal, 28(9), 1110—1115.

  54. Banan, Mo.R., and K.D. Hjelmstad (1993) Identification of Structural Systems from Measured Response, Report No. SRS 579, UILU-ENG-93-2002, University of Illinois at Urbana-Champaign, Urbana, IL.

  55. Banan, Mo.R., Ma.R. Banan, and K.D. Hjelmstad, (1994a) "Parameter Estimation of Structures from Static Response, Part I: Computational Aspects," Journal of Structural Engineering, ASCE, 120(11), 3243—3258.

  56. Banan, Mo.R., Ma.R. Banan, and K.D. Hjelmstad (1994b) "Parameter Estimation of Structures from Static Response, Part II: Numerical Simulation Studies," Journal of Structural Engineering, ASCE, 120(11), 3259—3283.

  57. Bruno, R.J. (1994) "Identification of Nonlinear Joints in a Truss Structure," Proceedings of the American Institute of Aeronautics and Astronautics (AIAA)/American Society of Mechanical Engineers (ASME) Adaptive Structures Forum, Hilton Head, SC, 402—410.

  58. Warren, G.E., and L.J. Malvar (1995) "Evaluation of Permanent Monitoring Sensors on Navy Piers," Proceedings of the ASCE Structures Congress XIII, Boston, MA, 28—43.

  59. Sanayei, M., and M.J. Saletnik, (1996a) "Parameter Estimation of Structures from Static Strain Measurements; I: Formulation," Journal of Structural Engineering, ASCE, 122(5), 555—562.

  60. Ibrahim, S.R., and E.C. Mikulcik (1977) "A Method for the Direct Identification of Vibration Parameters from the Free Response," Shock and Vibration Bulletin, Number 47, Part 4, 183—198.

  61. Ibrahim, S.R., and R.S. Pappa (1982) "Large Modal Survey Testing Using the Ibrahim Time Domain Identification Technique," Journal of Spacecraft, 19(5), 459—465.

  62. Seibold, S., and C.P. Fritzen (1991) "Recursive Identification of Nonlinear Systems by Means of the Extended Kalman Filter," Proceedings of the 9th International Modal Analysis Conference, Florence, Italy, 802—809.

  63. Hjelmstad, K.D., Mo.R. Banan, and Ma.R. Banan (1995) "Time-Domain Parameter Estimation Algorithm for Structures I: Computational Aspects," Journal of Engineering Mechanics, ASCE, 121(3), 424—434.

  64. Goodwin, G.C., and R.L. Payne (1977) Dynamic System Identification: Expert Design and Data Analysis, Academic Press, Inc., New York, NY.

  65. Baruch, M. (1982) "Optimal Correction of Mass and Stiffness Matrices Using Measured Modes," American Institute of Aeronautics and Astronautics Journal, 20(11), 1623—1626.

  66. Berman, A., and E.J. Nagy (1982) "Improvements of a Large Analytical Model Using Test Data," American Institute of Aeronautics and Astronautics Journal, 21(8), 1168—1173.

  67. Chen, J.C., J.A. Garba, and L.F. Pertti (1987) "Spacecraft Structural Model Improvement by Modal Test Results," Journal of Spacecraft and Rockets, 24(1), 90—94.

  68. Collins, J.D., G.C. Hart, T.K. Hasselman, and B. Kennedy (1974) "Statistical Identification of Structures," American Institute of Aeronautics and Astronautics Journal, 12(2), 185—190.

  69. Kabe, A.M. (1985) "Stiffness Matrix Adjustment Using Mode Data," American Institute of Aeronautics and Astronautics Journal, 23(9), 1431—1436.

  70. Beck, J.L., and P.C. Jennings (1980) "Structural Identification Using Linear Models and Earthquake Records," Earthquake Engineering and Structural Dynamics, 8, 145—160.

  71. Natke, H.G., and J.T.P. Yao, eds (1988) Structural Safety Evaluation Based on System Identification Approaches, Friedrick Vieweg & Son, Wiesbaden, Germany.

  72. Stubbs, N., and R. Osegueda (1990a) "Global Non-Destructive Damage Evaluation in Solids," International Journal of Analytical and Experimental Modal Analysis, 5(2), 67—79.

  73. Stubbs, N., and R. Osegueda (1990b) "Global Damage Detection in Solids—Experimental Verification," International Journal of Analytical and Experimental Modal Analysis, 5(2), 81—97.

  74. Kim, J.T., and N. Stubbs (1995) "Damage Detection in Offshore Jacket Structures from Limited Modal Information," International Journal of Offshore and Polar Engineers, 5(1), 58—66.

  75. Dascotte, E. (1991) "Applications of Finite Element Tuning Using Experimental Modal Data," Journal of Sound and Vibration, 25(6), 22—26.

  76. Smith, S.W., and C.A. Beattie (1991) "Optimal Identification Using Modal Data," Proceedings of the SDM Conference, American Institute of Aeronautics and Astronautics-91-0948-CP, 2319—2324.

  77. Chen, G.S., and B.J. Lurie (1992) "Active Member Bridge Feedback Control for Damping Augmentation," Journal of Guidance, Control, and Dynamics, 15(5), 1155-1160.

  78. Fritzen, C.P., and S. Zhu (1991) "Updating the Finite Element Models by Means of Measured Information," Computers & Structures, Vol. 40(2), 475—486.

  79. Gornshteyn, I. (1992) "Parameter Identification of Structures Using Selected Modal Measurements," M.S. Thesis No. 4340, Tufts University, Medford, MA.

  80. Liu, P.L. (1995) "Identification and Damage Detection of Trusses Using Modal Data," Journal of Structural Engineering, ASCE, 121(4), 599—608.

  81. Farrar, C.R., T.A. Duffey, P.A. Goldman, D.V. Jauregui, and J.S. Vigil (1996) Finite Element Analysis of the I-40 Bridge over the Rio Grande, Los Alamos National Laboratory, LA-12979-MS, Los Alamos, NM.

  82. Yao, G.C., K.C. Chang, and G.C. Lee (1992) "Damage Diagnosis of Steel Frames Using Vibrational Signature Analysis," Journal of Engineering Mechanics, ASCE, 118(9), 1949—1961.

  83. Li, D., H. Zhung, and B. Wang (1989) "The Principle and Technique of Experimental Strain Modal Analysis," Proceedings of the 7th International Modal Analysis Conference (IMAC), Society for Experimental Mechanics (SEM), 1285—1289.

  84. Wu, X., J. Ghaboussi, and J.H. Garrett, Jr. (1992) "Use of Neural Networks in Detection of Structural Damage," Computers and Structures, 42(4), 649—659.

  85. Masri, S.F., T.K. Caughey, and A.G. Chassiakos (1993) "Identification of Nonlinear Dynamic Systems Using Neural Networks," Journal of Applied Mechanics, Transactions, ASME, 60(1), 123—133.

  86. Shinozuka, M., E. Samaras, and A. Tsurui (1985) "ARMA Representation of Random Processes," Journal of Engineering Mechanics, ASCE, 111(3), 449—461.

  87. Stubbs, N., J.T. Kim, and C.R. Farrar (1995) "Field Verification of a Nondestructive Localization and Severity Estimation Algorithm," Proceedings of the 13th International Modal Analysis Conference, Nashville, TN, 210—218.

  88. Ross, T.J., H.C. Sorensen, S.J. Savage, and J.M. Carson (1990) "DAPS: Expert System for Structural Damage Assessment," Journal of Computing in Civil Engineering, ASCE, 4(4), 327—347.

  89. Sanayei, M., and M.J. Saletnik (1996b) "Parameter Estimation of Structures from Static Strain Measurements; II: Error Sensitivity Analysis," Journal of Structural Engineering, ASCE, 122(5), 563—572.

  90. Banan, Mo.R., Ma.R. Banan, and K.D. Hjelmstad (1995) "Time-Domain Parameter Estimation Algorithm for Structures. II: Numerical Simulation Studies," Journal of Engineering Mechanics, ASCE, 121(3), 435—447.

  91. Haftka, R.T., and H.M. Adelman (1985) "Selection of Actuator Locations for Static Shape Control of Large Space Structures by Heuristic Integer Programming," Computers & Structures, 20(1—3), 575—582.

  92. DeLorenzo, M.L. (1990) "Sensor and Actuator Selection for Large Space Structure Control," Journal of Guidance, 13(2), 249—257.

  93. Hajela, P., and F.J. Soeiro (1990a) “Recent Developments in Damage Detection Based on System Identification Methods,” Structural Optimization, 2, 1–10.

  94. Kammer, D.C. (1991) “Sensor Placement for On-orbit Modal Identification and Correlation of Large Space Structures,” American Institute of Aeronautics and Astronautics Journal, 14(2), 251–259.

  95. Holnicki-Szulc, J., F. Lopez-Almansa, and J. Rodellar (1993) “Optimal Location of Actuators for Active Damping of Vibration,” American Institute of Aeronautics and Astronautics Journal, 31(7), 1274–1279.

  96. Lim, T.W. (1991) “Structural Damage Detection Using Modal Test Data,” American Institute of Aeronautics and Astronautics Journal, 29(12), 2271–2274.

  97. Sanayei, M., O. Onipede, and S.R. Babu, (1992) “Selection of Noisy Measurement Locations for Error Reduction in Static Parameter Identification,” American Institute of Aeronautics and Astronautics Journal, 30(9), 2299–2309.

  98. Sanayei, M., and M.J. Saletnik (1995) “Design of Nondestructive Tests for Health Monitoring of Structures,” Proceedings of the ASCE Structures Congress XIII, ASCE, Boston, MA, 684–687.

  99. Brown, C.B. (1987) “Jaynes, Bayes and Fuzzy Identification,” Civil Engineering Systems, September, Vol. 4, 142–146.

  100. Beck, J.L. (1989) “Statistical System Identification of Structures,” Proceedings of the 5th International Conference on Structural Safety and Reliability, 1395–1402.

  101. Gangadharan, S.N., R.T. Haftka, and E. Nikolaidis (1991) “Probabilistic System Identification of Two Flexible Joint Models,” American Institute of Aeronautics and Astronautics Journal, 29(8), 1319–1326.

  102. Newmark, N.M., and E. Rosenblueth (1971) Fundamentals of Earthquake Engineering, Prentice-Hall, New Jersey.

  103. Bertero, V.V., and B. Bresler (1971) Developing Methodologies for Evaluating the Earthquake Safety of Existing Buildings, Report No. UCB 71-13, University of California, Berkeley, CA.

  104. Banon, H., and D. Veneziano (1982) “Seismic Safety of Reinforced Concrete Members and Structures,” Earthquake Engineering and Structural Dynamics, Vol. 10, 170–193.

  105. Park, Y.J., and A.H.S. Ang (1985) “Mechanistic Seismic Damage Model for Reinforced Concrete,” Journal of Structural Engineering, ASCE, 111(4), 740–757.

  106. Stephens, J.E., and J.T. Yao (1987) “Damage Assessment Using Response Measurements,” Journal of Structural Engineering, ASCE, 113(4), 787–801.

  107. Yao, J.T.P., and W.H. Munse, (1962) “Low-Cycle Fatigue Behavior of Mild Steel,” Special Technical Publication Number 338, American Society for Testing and Materials, Philadelphia, PA.

  108. Chung, Y.S., C. Meyer, and M. Shinozuka (1988) “Damage Model for Reinforced Concrete, Seismic Engineering Research and Practice,” Proceedings of the 1989 ASCE Structures Congress, San Francisco, CA, 478–487.

  109. DiPasquale, E., J.W. Ju, A. Askar, and A.S. Cakmak (1990) “Relation Between Global Damage Indices and Local Stiffness Degradation,” Journal of Structural Engineering, ASCE, 116(5), 1440–1456.

  110. Pandey, P.C., and S.V. Barai (1994) “Sensitivity-Based Weighted-Average in Structural Damage Assessment,” Journal of Performance of Constructed Facilities, 8(4), 243–263.

  111. Farrar, C.R., and K.M. Cone (1995) “Vibration Testing of the I-40 Bridge Before and After the Introduction of Damage,” Proceedings of the 13th International Modal Analysis Conference, Nashville, TN. Published in cooperation with SPIE, Vol. 2460, 203–209.

  112. Mayes, R.L. (1995) “An Experimental Algorithm for Detecting Damage Applied to the I-40 Bridge over the Rio Grande,” Proceedings of the 13th International Modal Analysis Conference, Nashville, TN, 219–225.

  113. Reese, L.C., and K.H. Stokoe II, (1988) “Instrumentation for Tests of Piles Subjected to Axial Loading,” Transportation Research Record, 1169, 33–42.

  114. Richart, Jr., F.E. and R.V. Whitman (1967) “Comparison of Footing Vibration Tests with Theory,” Journal of the Soil Mechanics Division, ASCE, 93(SM6), 143–165.

  115. Samtani, N.C., J. Wang, F. Pepe, and M.J. Abrahams (1994) “Horizontal and Vertical Movements of Bridge Piers Subjected to Ship Impact,” Proceedings of the Vertical and Horizontal Deformations of Foundations and Embankments, ASCE, College Station, TX, 245–257.

  116. Norman, A., I. Cannon, and L. Asch (1989) “The History and Future of Safety Monitoring in Liquid Rocket Engines,” AIAA Technical Paper, 89–2410.

  117. Pau, L.F. (1989), Failure Diagnosis and Performance Monitoring, Marcel Dekker, Inc., New York, NY.

  118. Patton, R., P. Frank, and R. Clark (1989) Fault Diagnosis in Dynamic Systems, Prentice-Hall, Englewood Cliffs, NJ.

  119. Willsky, A.S. (1976) “A Survey of Design Methods for Failure Detection in Dynamic Systems,” Automatica, 12, 601–611.

  120. “Pontis, Version 2.0 Technical Manual,” FHWA (1994) Report No. SA-94-031.

  121. Czepiel, E. (1995) “Bridge Management Systems Literature Review and Search,“ ITI Technical Report No. 11, Northwestern University, Evanston, IL

  122. FHWA (2004), Milepost 2004, Pub. No. FHWA-HPL-05-012, Washington, DC.

  123. Public Law 104-59 (1995) “National Highway System Designation Act of 1995,” Section 205.

  124. FHWA (1993) “Federal Register, Management and Monitoring Systems Interim Final Rule,” 58(229), 63442.

  125. Ismart, D. (1994) “State Management System,” TR News, Number 173.

  126. FHWA (1996) Pontis, Release 3.1, User’s Manual.

  127. Hadavi, A. (1998) “Incorporation of Non-Destructive Evaluation in Pontis Bridge Management System,” Proceedings of 1998 SMT III: A Non-Destructive Testing Conference, San Antonio, TX, March, 464–471.

  128. McNeil, S. (1995) “Management Systems Data Requirements: Boon or Burden,” Proceedings of the ASCE Transportation Congress, San Diego, CA.

  129. Ellingwood, B.R. (1995) “Engineering Reliability and Risk Analysis for Water Resources Investments: Role of Structural Degradation in Time-Dependent Reliability Analysis,” Final Report to U.S. Army Corps of Engineers, Contract Number ITL-95-3, Waterways Experiment Station, Vicksburg, MS.

  130. Sanford, K. (1995) “Data Integration: Leveraging Data Collection Efforts for Infrastructure Management,” PhD Proposal, Department of Civil and Environmental Engineering, Carnegie Mellon University, Pittsburgh, PA.

  131. Adams, T. (1989) “RETAIN: An Integrated Knowledge-Based Expert System for Retaining-Wall Rehabilitation Design,” Ph.D. Thesis, Department of Civil Engineering, Carnegie Mellon University, Pittsburgh, PA.

  132. ACI 228.2R-98 (1998) “Nondestructive Test Methods for Evaluation of Concrete in Structures,” American Concrete Institute (ACI) Manual of Concrete Practice, Part 2, Farmington Hills, MI.

  133. American Institute of Steel Construction, Inc. (2002) LRFD Manual of Steel Construction, Chicago, IL.

  134. Santini, E.M. (1998) “Bridge Foundation Stiffness Estimation Using Dynamic Non-Destructive Test Data,” Master of Science in Civil and Environmental Engineering, Thesis, Tufts University, Medford, MA; Advisor: Masoud Sanayei.

  135. Sanayei, M., and E.M. Santini (1998) “Dynamic Bridge Substructure Evaluation and Monitoring System,” Report of subcontract to Tufts University from FHWA grant to Olson Engineering, Wheat Ridge, CO.

  136. Sanayei, M., and B. Arya (1998) unpublished work.

  137. Novak, M., H. El-Marsafawi, and Y.C. Han (1992) “Dynamic Experiments on Two Pile Groups,” Journal of Geotechnical Engineering, ASCE, 118(4), 576-592.

  138. Poulos, H.G., and E.H. Davis (1980) Pile Foundation Analysis and Design, John Wiley, New York, NY.

  139. Mori, Y., and B.R. Ellingwood (1994a) “Maintaining Reliability of Concrete Structures. 1. Role of Inspection Repair,” Journal of Structural Engineering, ASCE, 120(3), 824–845.

  140. Mori, Y., and B.R. Ellingwood (1994b) “Maintaining Reliability of Concrete Structures. 2. Optimum Inspection Repair,” Journal of Structural Engineering, ASCE, 120(3), 846–862.

  141. Olson, L.D., and C.C. Wright (1990) “Nondestructive Testing for Repair and Rehabilitation,” Concrete International: Design & Construction, March, 58–64.

  142. Doebling, S.W., C. Farrar, F.M. Hemez, and L.D. Peterson (1997) “Improved Damage Location Accuracy Using Strain Energy-Based Mode Selection Criteria,” American Institute of Aeronautics and Astronautics Journal, Vol. 35(4), 693–699.

  143. Doebling, S.W., C.R. Farrar, M.B. Prime, and D.W. Shevitz (1998) “A Review of Damage Identification Methods That Examine Changes in Dynamic Properties,” Shock and Vibration Digest, 30(2), 91–105.

  144. Chang, F.K. (1998) Structural Health Monitoring: Current Status and Perspectives, CRC Press, Lancaster, PA.

  145. Chase, S.B., and G. Washer (1997) “Nondestructive Evaluation for Bridge Management in the Next Century,” FHWA, Public Roads, July/August, 16–25.

  146. Farrar, C.R., S.W. Doebling, and D.A. Nix (2001) “Vibration-Based Structural Damage Identification,” Philosophical Transactions of the Royal Society: Mathematical, Physical & Engineering Sciences, 359(1778), 131–149.

  147. Farrar, C.R., and S.W. Doebling (1997) “Lessons Learned from Applications of Vibration Based Damage Identification Methods to Large Bridge Structure,” Structural Health Monitoring: Current Status and Perspectives, (F.K. Chang, ed.) CRC Press, Lancaster, PA., 351–370

  148. Salawu, O.S., and C. Williams (1995b) “Review of Full-Scale Dynamic Testing of Bridge Structures,” Engineering Structures, 17(2), 113–121.

  149. Salawu, O.S. (1997) “Detection of Structural Damage Through Changes in Frequency: A Review,” Engineering Structures, 19(9), 718–723.

  150. Caicedo, J., S.J. Dyke, and E.A. Johnson (2000) “Health Monitoring Based on Component Transfer Functions,” Advances in Structural Dynamics, (J.M. Ko and Y.L. Xu, eds.) Vol. II, 997–1004.

  151. Chang, F.K. (1999) Structural Health Monitoring 2000, CRC Press, Lancaster, PA.

  152. Aktan, A.E., F.N. Catbas, K.A. Grimmelsman, and C.J. Tsikos (2000) “Issues in Infrastructure Health Monitoring for Management,” ASCE Journal of Engineering Mechanics, 126(7), 677–683.

  153. Hou, Z., M. Noori and R. St. Amand (2000) “Wavelet-Based Approach for Structural Damage Detection,” Journal of Engineering Mechanics, ASCE, 126(7), 677–683.

  154. Kim, J.T., and N. Stubbs (2000) “Nondestructive Crack Detection Model and Vibration-Based System Identification in Structures,” Eighth ASCE Specialty Conference on Probabilistic Mechanics and Structural Reliability, Notre Dame, IN, July 24–26, 2000, CD-ROM.

  155. Park, G., H.H. Cudney, and D.J. Inman (2000) “Impedance-Based Health Monitoring of Civil Structural Components,” Journal of Infrastructure, ASCE, 6(4), 153–160.

  156. Shi, Z.Y., S.S. Law and L.M. Zhang (2000a) “Optimum Sensor Placement for Structural Damage Detection,” Journal of Engineering Mechanics, ASCE, 126(11), 1173–1179.

  157. Shi, Z.Y., S.S. Law and L.M. Zhang (2000b) “Structural Damage Detection from Modal Strain Energy Change,” Journal of Engineering Mechanics, ASCE, 126(12), 1216–1223.

  158. Shah, S.P., J.S. Popovics, K.V. Subramaniam and C-M. Aldea (2000) “New Directions in Concrete Health Monitoring Technology,” Journal of Engineering Mechanics, ASCE, 126(7), 754–760.

  159. Smyth, A.W., S.F. Masri, T.K. Caughey, and N.F. Hunter (2000) “Surveillance of Mechanical Systems on the Basis of Vibration Signature Analysis,” Journal of Applied Mechanics, ASME, 67, 540–551.

  160. Vanik, M.W., J.L. Beck, and S.K. Au (2000) “Bayesian Probabilistic Approach to Structural Health Monitoring,” Journal of Engineering Mechanics, ASCE, 126(7), 738–745.

  161. Sohn, H., J.A. Czarnecki, and C.R. Farrar (2000) “Structural Health Monitoring Using Statistical Process Control,” Journal of Structural Engineering, ASCE, 126(11), 1356–1363.

  162. Vestroni, F., and D. Capecchi (2000) “Damage Detection in Beam Structures Based on Measurements of Natural Frequencies,” Journal of Engineering Mechanics, ASCE, 126(7), 761–768.

  163. Yun, C.B., J. H. Yi, J. M. Shim, J.W. Lee, and J. Kim (2000) “Damage Estimation for Bridge Model Under Traffic Loading,” Eighth ASCE Specialty Conference on Probabilistic Mechanics and Structural Reliability, Notre Dame, IN, July 24–26, 2000, CD-ROM.

  164. Onsay, T., and A.G. Haddow (1994) “Wavelet Transform Analysis of Transient Wave Propagation in a Dispersive Medium,” Journal of the Acoustical Society of America, 95(3), 1441–1449.

  165. Chakraborty, A., and D. Okaya (1995) “Frequency-Time Decomposition of Seismic Data Using Wavelet-Based Methods,” Geophysics, 60(6), 1906–1916.

  166. Gurley, K. and A. Kareem (1999) “Applications of Wavelet Transforms in Earthquake, Wind, and Ocean Engineering,” Engineering Structures, Vol. 21, 149–167.

  167. Ghanem, R., and F. Romeo (2001) “A Wavelet-Based Approach for Model and Parameter Identification of Non-Linear Systems,” International Journal of Non-Linear Mechanics, 36(5), 835–859.

  168. Zeldin, B.A., and P.D. Spanos (1996) “Random Field Representation and Synthesis Using Wavelet Bases,” Journal of Applied Mechanics, ASME, 63, 946–952.

  169. Spanos, P.D., and V.R.S. Rao (2001) “Random Field Representation in a Biorthogonal Wavelet Basis,” Journal of Engineering Mechanics, ASCE, 127(2), 194–205.

  170. Daubechies, I. (1990) “The Wavelet Transform, Time-Frequency Localization and Signal Analysis,” IEEE Transaction on Information Theory, Vol. 36, No. 5, 961–1005.

  171. Daubechies, I. (1992) “Ten Lectures on Wavelets,” Society for Industrial and Applied Mathematics, Philadelphia, PA.

  172. Morlet, J., and A. Grossmann (1984) “Decomposition of Hardy Functions into Square Integrable Wavelets of Constant Shape,” SIAM Journal on Mathematical Analysis, 15, 723-736.

  173. Huang, W., Y.C. Fung, N.E. Huang, and Z. Shen (1998) “Engineering Analysis of Biological Variables: An Example of Blood Pressure over 1 Day,” Proceedings of the National Academy of Science, 4816–4821.

  174. Huang, N.E. (2000) “A new view of earthquake ground motion data: The Hilbert spectral analysis,” Proceedings of International Workshop on Annual Commemoration of Chi-Chi Earthquake (C.H. Loh and W.I. Liao, eds.), Vol. II, 64–75.

  175. Zhang, R., and S. Ma (2000) “HHT Analysis of Earthquake Motion Recordings and Its Implications to Simulation of Ground Motion,” Monte Carlo Simulation (G.I. Schueller and P.D. Spanos, eds.), 483–490.

  176. Zhang, R., S. Ma, E. Safak, and S. Hartzell (2003) “Hilbert-Huang Transform Analysis of Dynamic and Earthquake Motion Recordings,” Journal of Engineering Mechanics, ASCE, 129, 861–875.

  177. Zhang, R. (2001a) “Features of HHT-Based, Low-Frequency Earthquake Recordings,” Proceedings of 8th International Conference on Structural Safety and Reliability (M. Shinozuka, G.I. Schueller, and R. Corotis, eds.), Newport Beach, CA, June 17–22, 2001, CD-ROM.

  178. Zhang, R. (2001b) “The Role of Hilbert-Huang Transform in Earthquake Engineering,” Fifth World Multiconference on Systemics, Cybernetics, and Informatics, Orlando, FL, July 22–25, CD-ROM.

  179. Ma, S., and R. Zhang (2001) “Empirical Mode Decomposition of the 1994 Northridge Earthquake and Its Interpretation for Seismic Source Mechanism,” 10th International Conference on Soil Dynamics and Earthquake Engineering, Philadelphia, PA, October 7–10.

  180. Zhang, R., R. King, and L. Olson (2001) “An HHT-Based Structural Damage Diagnosis,” The First Asia-Pacific Workshop on Smart Materials, Nanjing, China, May 28–29.

  181. Yang, J.N., P.K. Kagoo, and Y. Lei, (2000) “Parametric Identification of Tall Buildings Using Ambient Wind Vibration Data,” Eighth ASCE Specialty Conference on Probabilistic Mechanics and Structural Reliability, Notre Dame, IN, July 24–26, CD-ROM.

  182. Yang, J.N., and Y. Lei (2000) “Identification of Tall Buildings Using Ambient Noisy Wind Vibration Data,” Advances in Structural Dynamics, (J.M. Ko and Y.L. Xu, eds.) Vol. II, 1093–1100.

  183. Vincent, H.T., S.L.J. Flu, and Z. Hou (2000) “Damage Detection Using Empirical Mode Decomposition Method and a Comparison with Wavelet Analysis,” in Structural Health Monitoring 2000 (F.K Chang, ed.), Technomic Publishing, 891–900.

  184. Loh, C.H., N.E. Huang, and T.S. Wu (2000) “Application of EMD+HHT method to seismic response data of building structure,” Proceedings of International Workshop on Annual Commemoration of Chi-Chi Earthquake, (C.H. Loh and W.I. Liao, eds.), Vol. II, 270–281.

  185. Loh, C.H. (2000) “Seismic Response Measurement and System Identification of Bridges,” Proceedings of Workshop on Mitigation on Earthquake Disaster by Advanced Technologies, Los Angeles, CA, March 2–3, 2000.

  186. Huang, N.E., R.S. Long, and Z. Shen (1999) “A New View of Nonlinear Water Waves–Hilbert Spectrum,” Annual Review of Fluid Mechanics, 31, 417–457.

  187. Huang, K. (2001) “A Nondestructive Instrument Bridge Safety Inspection System Using a Transient Load,” U.S. Patent Application Number 09/210.693; patent allowed April 2001.

  188. Clough, R.W., and J. Penzien (1993) Dynamics of Structures, McGraw Hill.

  189. Hearn, B., and H. Shim (1998) “Integration of Bridge Management Systems and Nondestructive Evaluation,” Journal of Infrastructure Systems, 5(2), June 1998, 49–55.

  190. Ben-Akiva, M. and R. Ramaswamy (1993) “Approach for Predicting Latent Infrastructure Facility Deterioration,”Transportation Science, Vol. 27(2) (May), 174–193.

  191. Sanford, K. (1997) “Improving Condition Assessment; Data Requirement for Bridge Management,” PhD Thesis, Department of Civil and Environmental Engineering, Carnegie Mellon University, Pittsburgh, PA.

  192. Prine, D.W. (1998) “Problems Associated with Nondestructive Evaluation of Bridges,” Northwestern University, Infrastructure Technology Institute, http://www.iti.northwestern.edu/publications/technical_reports/tr13.pdf, accessed December 1998.

  193. Aktan, A.E., V. Dalal, D. Farhey, A. Helmicki, V. Hunt, and S. Shelley, (1996) “Condition and Reliability Evaluation for Bridge Management,” Journal of Infrastructure Systems, 2(3), 108–117.

 

Previous | Table of Contents | Next


The Federal Highway Administration (FHWA) is a part of the U.S. Department of Transportation and is headquartered in Washington, D.C., with field offices across the United States. is a major agency of the U.S. Department of Transportation (DOT).
The Federal Highway Administration (FHWA) is a part of the U.S. Department of Transportation and is headquartered in Washington, D.C., with field offices across the United States. is a major agency of the U.S. Department of Transportation (DOT). Geotechnical Engineering Federal Highway Administration's (FHWA) R&T Web site portal, which provides access to or information about the Agency’s R&T program, projects, partnerships, publications, and results.
FHWA
United States Department of Transportation - Federal Highway Administration