Skip to contentUnited States Department of Transportation - Federal Highway Administration FHWA Home
Research Home   |   Pavements Home
Report
This report is an archived publication and may contain dated technical, contact, and link information
Publication Number: FHWA-RD-02-095

References

Previous | Table of Contents

  1. Special Report 61B: AASHO Road Test, Report 2-Materials and Construction, Highway Research Board, Publication 951, National Academy of Sciences-National Research Council, Washington, DC, 1962.

  2. "Glossary of Highway Quality Assurance Terms," Transportation Research Circular No. E-C037, Transportation Research Board, Washington, DC, April 2002.

  3. "Statistically Oriented End-Result Specifications," NCHRP Synthesis 38, Transportation Research Board, Washington, DC, 1976.

  4. "Quality Assurance," NCHRP Synthesis 65, Transportation Research Board, Washington, DC, 1979.

  5. "Performance-Related Specifications for Highway Construction and Rehabilitation," NCHRP Synthesis 212, Transportation Research Board, Washington, DC, 1995.

  6. "23 CFR Part 637B," Quality Assurance Procedures for Construction, Federal Highway Administration, Federal Register, July 1995.

  7. AASHTO Quality Assurance Guide Specification, AASHTO Quality Construction Task Force, American Association of State Highway and Transportation Officials, February 1996.

  8. Manual on Presentation of Data and Control Chart Analysis, Sixth Ed., ASTM Committee E-11 on Quality and Statistics, American Society for Testing and Materials, Philadelphia, PA, 1992.

  9. The Memory Jogger IITM, ISBN 1-879364-44-1, GOAL/QPC, Salem, NH, January 1994.

  10. Grant, E.L. and Leavenworth, R.S., Statistical Quality Control, Seventh Ed., ISBN 0-07-043555-3, McGraw-Hill, January 1996.

  11. Burati, J.L. and Hughes, C.S., "Highway Materials Engineering Module I: Materials Control and Acceptance-Quality Assurance," National Highway Institute Course No. 13123, Federal Highway Administration, Washington, DC, 2001.

  12. "AASHTO Draft Standard Recommended Practice for Technician Training and Qualification Programs," AASHTO Materials, Part I Specifications: R-25-00, American Association of State Highway and Transportation Officials, 2000.

  13. "Program Detail Manual for Certification in the Field of Transportation Engineering Technology," Subfield of Highway Materials, Fifth Ed., National Institute of Certification in Engineering Technologies, 1996.

  14. "Program Detail Manual for Certification in the Field of Construction Materials Testing," Subfield of Asphalt, Concrete, and Soils, Sixth Ed., National Institute of Certification in Engineering Technologies, 1997.

  15. Guidelines for Establishing a Technician Training and Certification Program, National Quality Initiative, December 1997.

  16. AASHTO Implementation Manual for Quality Assurance, AASHTO Quality Construction Task Force, American Association of State Highway and Transportation Officials, February 1996.

  17. Burati, J.L., et al, unpublished findings.

  18. Weed, R.M., "Quality Assurance Software for the Personal Computer," Publication No. FHWA-SA-96-026, Federal Highway Administration, Washington, DC, May 1996.

  19. "The Use of Incentive and Disincentive Provisions Regarding Quality and Completion Time for Federal Aid Highway Construction," National Experimental Evaluation Program Project 24, Notice N 5080.66, Federal Highway Administration, Washington, DC, 1977.

  20. Weed, R.M., "Unbiased Graduated Pay Schedules," Transportation Research Record 745, Transportation Research Board, Washington, DC, 1980.

  21. Schmitt, R.L., Russell, J.S., Hanna, A.S., Bahia, H.U., and Jung, G.S., "Summary of Current Quality Control/Quality Assurance Practices for Hot-Mix Asphalt Concrete," Transportation Research Record 1632, Transportation Research Board, Washington, DC, 1998.

  22. "Acceptance Sampling Plans for Highway Construction," AASHTO Materials, Part I Specifications: R-9, American Association of State Highway and Transportation Officials, 1984.

  23. "Military Standard 414, Sampling Procedures for Inspection by Variables for Percent Defective," U.S. Department of Defense, Washington, DC, June 1957.

  24. Weed, R.M., "Development of Air Voids Specification for Bituminous Concrete," Transportation Research Record 1491, Transportation Research Board, Washington, DC, 1995.

  25. Palise, F., Strizki, B., and Weed, R.M., "Upgrading the Asphaltic Concrete Specification of the New Jersey Department of Transportation," Transportation Research Record 1616, Transportation Research Board, Washington, DC, 1998.

  26. Sayers, M.W. and Karamihas, S.M., The Little Book of Profiling, The University of Michigan Transportation Research Institute, National Highway Institute, Federal Highway Administration, Washington, DC, September 1998.

  27. Hughes, C.S., Simpson, A.L., Cominsky, R., Pendleton, O.J., Weed, R.M., and Wilson, T., "Measurement and Specification of Construction Quality, Volume I," Final Report, Federal Highway Administration, FHWA-RD-98-077, May 1998.

  28. Pearson, E.S., and Hartley, H.O., eds., Biometrika Tables for Statisticians, Volume I, Cambridge University Press, New York, 1929.

  29. Jones, T.A., Skewness and Kurtosis as Criteria of Normality in Observed Frequency Distributions, Esso Production Research, Report 69-5, 1969.

  30. Burington, R.S., Handbook of Mathematical Tables and Formulas, McGraw-Hill, New York, 1973.

  31. AASHTO Guide for Design of Pavement Structures, American Association of State Highway and Transportation Officials, Washington, DC, 1993.

  32. Weed, R.M., "A Rational Method for Relating As-Built Quality to Pavement Performance and Value," Transportation Research Record 1632, Transportation Research Board, Washington, DC, 1998.

  33. Linden, R.N., Mahoney, J.P., and Jackson, N.C., "Effect of Compaction on Asphalt Concrete Pavement," Transportation Research Record 1217, Transportation Research Board, Washington, DC, 1989.

 

Previous | Table of Contents


The Federal Highway Administration (FHWA) is a part of the U.S. Department of Transportation and is headquartered in Washington, D.C., with field offices across the United States. is a major agency of the U.S. Department of Transportation (DOT).
The Federal Highway Administration (FHWA) is a part of the U.S. Department of Transportation and is headquartered in Washington, D.C., with field offices across the United States. is a major agency of the U.S. Department of Transportation (DOT). Provide leadership and technology for the delivery of long life pavements that meet our customers needs and are safe, cost effective, and can be effectively maintained. Federal Highway Administration's (FHWA) R&T Web site portal, which provides access to or information about the Agency’s R&T program, projects, partnerships, publications, and results.
FHWA
United States Department of Transportation - Federal Highway Administration