Show driver’s license.
Before we begin, it is required for me to verify that you have a driver’s license. Would you please show me your license?
Must be a valid Class A driver’s license to proceed with the study. Out of State is fine.
Experimenter reads all text in italics aloud to each participant:
This research is sponsored by the Federal Highway Administration. The purpose is to gather information that will be available to the public, including car manufacturers. The goal is to determine the best vision enhancement systems to help drivers see objects and pavement markings at night.
This study will involve you driving different cars for three sessions. The first session will be a training session. That is what we will be doing today. The other two will be on the Smart Road. The first session should be less than an hour, and the other two sessions will take approximately 2-3 hours. We will pay you 20 dollars per hour. The total amount will be given to you at the end of the third session.
The study will take place on the Smart Road testing facility. The road will be closed off to all traffic except for experimental vehicles. There will be, at most, two experimental vehicles on the road at one time, including the vehicle you will be in.
During the study, an experimenter will be in the vehicle with you at all times. The experimenter will be responsible for asking you questions during the drive, recording some data, and monitoring the equipment. In addition, he or she will be able to answer any questions you have during the drive.
You will be exposed to 12 different vision enhancement systems. You will make two laps on the Smart Road for each vision enhancement system. On these laps, you will be exposed to several objects. Your job will be to tell me when you are able to detect the object and when you are able to recognize what the object is.
Do you have any questions at this time?
(Answer questions if needed).
Have the participant sit at the table. Explain the following:
The following presentation will provide instructions, definitions, and examples of the objects we will be using. You can ask me questions at any time. There will be some pages I will place extra emphasis on. Any questions before we begin the presentation?
Answer questions as needed. Once there are no more questions, begin the instructions. Stress the following points:
- Definition of detection versus recognition.
- Stress safety (i.e. 25 miles per hour, drive safely, etc.).
- Again, answer questions.
Slide 1: This study is called Enhanced Night Visibility given that its purpose is to evaluate vision enhancement systems. Tonight, I will be the experimenter that will be riding with you during the training session. For the other two sessions, you will also be riding with an experimenter.
Slide 2: This is a timeline of how the night will break down. We are in the laboratory training portion right now. Once we are done with the lab training, we will familiarize you with the thermal imaging system and the procedure for the experiment.
Slide 3: The Enhanced Night Visibility project is an extensive research project to determine what vision enhancement system configuration will best help people see objects on the road at night.
We needed people to give us information on visibility and preference of the different vision enhancement systems. That is why you were asked to come here tonight. The information you give us will be compiled with other people’s data so we can determine the best configuration.
We will be using four different vehicles over the two nights of onroad studies: one car with a thermal imaging system, a pickup truck, and two sport utility vehicles.
The next two nights of the study will take place out in the Smart Road once it is completely dark. We will perform this study under several weather conditions. You will be performing the study under a ___ condition.
Slide 4: We are going through this training to make you more comfortable with the study before we begin driving. We will cover the items mentioned on this slide. I want to stress that if you have any questions, please stop and ask at any time.
Slide 5: The Smart Road is perfect for testing of this type. It is completely closed off, making it safe for both drivers and experimenters.
Slide 6: This is a picture or part of the Smart Road during daytime.
Slide 7: You will drive a total of four vehicles between the two nights. Each vehicle might include more than one configuration of vision enhancement systems, for a total of 12 different configurations. Eleven of those configurations are headlamps; the 12th configuration is an Infrared-Thermal Imaging System. This last one is a “heads-up” display positioned over the steering wheel. You will have the opportunity to practice with this system tonight.
Slide 8: Your primary responsibility is to drive safely. We are also interested in how far away drivers can detect and recognize objects along the road with these vision enhancement systems. We will explain what we mean by detection and recognition shortly. However, I would like to show you this.
**Show them the button**
I will ask you to hold a button like this during the study in your hand while driving. You will press the button like this.
**Press the button**
When you press this in the car, you will hear a beep.
Slide 9: Detection is when you can just tell that something is on the road in front of you. You cannot tell what the object is but you know something is there. Detection is important while driving, since it prepares you to possibly make an evasive action. As soon as you detect an object, please press the push button.
Slide 10: Recognition is when you not only know something is there but you also know what it is. This is important to help you decide how best to avoid the object. For instance, if you see an object in the road and then realize it is a dog, you know that the object can move unpredictably and you need to slow down greatly and likely swerve to avoid it. If, however, you see an object and it is a box, you know the object is not likely to move, and slowing down a little and swerving will likely be sufficient.
When you can accurately recognize an object, I would like you to press the push button and recognize the object verbally at the same time. You will need to be specific when you recognize. If you see an object, you will need to tell me what the object is.
“I see a person”
“I see a cyclist”
“I see a kid’s bike”
“I see a tire tread”
If you perform an unsuccessful recognition, you can press the push button again.
Slide 11: Dynamic objects include pedestrians and cyclists. The pedestrians will be people walking either along the road or across the road; the cyclists will be riding a bicycle across the road. We will see pictures of these objects shortly.
Slide 12: You will also see static objects along the road. The first, a child’s bicycle, will be lying along the right side of the road. The second, a tire tread, will also be lying on the right-hand side of the road. Finally, a person will be standing on the right-hand side of the road to simulate a person waiting to cross the road.
Slide 13-15: Here are pictures of a few of the objects. They will not look exactly like this in the road, since these were taken inside with the lights on. However, this should give you a good idea of what they will look like.
**Tell the participant what they are and whether they are static or dynamic **
Slide 16: We will also have some questionnaires for you to complete. As soon as you are done with a vision enhancement system, you will evaluate it. Therefore, after you see the objects with each VES, I will ask you this series of questions (show questionnaire). For the first set of questions, we want you to rank your answer on a scale from 1 to 7. One means you strongly agree with the statement. Seven means you strongly disagree with the statement. You can give me any number between 1 and 7. Your answers may or may not be different for each VES, we just want your opinion on the one you just saw.
Here is the questionnaire that you will be answering for each VES. Let’s go over each of the statements. Please, feel free to stop me at anytime, and ask as many questions as you want. (Read and explain each statement)
Slide 17: Go over main points.
Slide 18: Do you have any questions about this questionnaire?
Answer any questions.
Shortly we will have you drive one of the experimental vehicles to help familiarize you with the thermal imaging system. This uses a heads-up display that is projected onto the windshield just below your field of view. The thermal imaging system is not intended to be used alone; instead it is supposed to accompany your normal driving. Be sure to view the road as your normally do while also using the heads-up display.
***Show them diagram***
This is a diagram of the course for tonight’s training.
While reading the following section point out the path that the participant is supposed to follow for the training.
First drive to the road section. The speed limit for this portion is 25 miles per hour. On this section, you will be able to see how things like pavement markings show up in the heads-up display. At the turn-around of the road section, you need to pull to the far right-hand side of the shoulder and stop the car just past the cone. Then turn the steering wheel fully to the left before beginning the U-turn. Be sure to look for traffic approaching from both directions.
We will now proceed to the gravel lot. When entering the gravel lot, between the two cones, watch for traffic coming from the right. Once on the gravel lot, the speed limit is 15 miles per hour. You will then drive through two more cones, driving parallel to the white line on your left. Here you will see one of the objects involved in the experiment and how it appears in the heads-up display. Then make a U-turn around the cone at end of white line and leave the gravel lot, and proceed to the road section.
You will repeat this process seeing different object two more times. This will conclude the training for today.