FHWA Resource Center
(PCEF) PRESTRESSED CONCRETE COMMITTEE FOR ECONOMICAL FABRICATION
CONSTRUCTION & PRODUCTION ISSUES FOR
REGION-WIDE UNFORMITY AND STANDARDIZATION
June 6, 2001
Due Date: July 20, 2001
Please consider the balloted item for adoption by the PCEF committee as Construction
and Production Region-wide Standardization Issues.
Cast one vote (A, B, or C) for the attached balloted item after coordinating
within the inter-departments of the division. We strongly encourage all DOTs
to participate in this ballot to facilitate this effort of economical fabrication
within the region. Please sign, date, and return completed ballot by mail /fax
on or before July 20, 2001 to the attention of subcommittee Chair, Lalith Galagedera:
Lalith Galagedera, PE
10 Hale Street, 3rd Floor
Charleston, WV 25301
Select option A, if all the items listed in the balloted item are acceptable/approved.
Select option B, if some of the items are acceptable. Select option C, only
if totally disagreeable. In order for option C to be considered valid, an explanation
for disapproval shall be included in the ballot by July 20, 2001. If absolutely
necessary, additional time to provide support documentation shall be granted
on a case by case basis.
Vote fot Balloted Item:
Item #1: Evaluation and acceptance criteria for Cracks
A. ____________ Approve - Accept the balloted Item in full.
B. ____________ Approve with comment - Accept the balloted item with the comments
shown on the ballot or the attached document. We acknowledge that our comments
may not be incorporated and therefore, we find the balloted item acceptable
even if our comments are not incorporated.
C. ____________ Do not approve - We do not accept the balloted item(s) for
the reason(s) as indicated. See suggestions and/or documentation attached for
possible re-consideration of this Item entirely.