Transportation Performance Management

TPM Guidance

Reporting

• INFORMATION: Adjustments to the 2022 TPM Biennial Reporting Timeline (posted 10/04/2022)
• Performance Management Form (PMF) Input Fields: Baseline Performance Period (BPP) Report Due October 1, 2022 (posted 3/23/2022)
• Performance Management Form (PMF) Input Fields: Full Performance Period (FPP) Progress Report Due October 1, 2022 (posted 2/11/2022)
• State Biennial Performance Reporting Guide: 2020 Mid Performance Period Progress Report (posted 6/18/2021)
• Performance Management Form (PMF) Input Fields: Mid Performance Period (MPP) Progress Report Due October 1, 2020 (posted 4/28/2020)
• Performance Management Form (PMF) Input Fields
• Initial State Performance Report (08/31/2016)

Significant Progress Determination

• FHWA Procedure for Determining Significant Progress toward the NHPP and NHFP Measures (posted 6/18/2021)

Measure Computation Procedures

• FHWA Procedure for Safety Performance Measure Computation and State Target Achievement Assessment February 2019
• FHWA Computation Procedure for the Bridge Condition Measures April 2018
• FHWA Computation Procedure for the Pavement Condition Measures May 2018
• FHWA Computation Procedure for Travel Time Based and Percent Non-Single Occupancy Vehicle (non-SOV) Travel Performance Measures May 2018 (updated May 2020)
• Computation Guidance for Congestion Mitigation and Air Quality Improvement (CMAQ) Program Total Emissions Reduction Measure
  • CMAQ Public Access System

Metric Calculation

• National Performance Measures for Congestion, Reliability, and Freight, and CMAQ Traffic Congestion General Guidance and Step-by-Step Metric Calculation Procedures
  • Hourly Traffic Volume Profile Values for Figures 1.1 through 1.5
• Average Vehicle Occupancy Factors for Computing Travel Time Reliability Measures and Total Peak Hour Excessive Delay Metrics April 2018

HPMS Guidance

• HPMS Field Manual Supplemental Guidance: Travel Time Metric Data Reporting Requirements & Specifications February 2018 (updated May 2020)
• Highway Performance Monitoring System Travel Time Based Metric Data Validation May 2018 (updated June 2021)
• PM2 Pavement Metric Data Dictionary (updated March 2020)

Pavements

• Non-Interstate NHS Pavement Target Reporting Options for First Performance Period (09/27/18)
• The "Phase-in" Requirements and the "Transition" Provision for the Pavement Condition Measures (06/05/2018)

Asset Management

• Transportation Asset Management Plan Consistency Determination Guidance (February, 2019)
• November 20, 2018 Penalty Decision Pursuant to MAP-21 Section 1106(b) and 23 CFR 515.15(b)

Freight

• Truck Freight Bottleneck Reporting Guidebook

CMAQ

• Performance Measures for CMAQ
  • Congestion Mitigation and Air Quality Improvement Program: A Guidebook for Preparing Performance Plans for Metropolitan Planning Organizations
  • Applicability Determination for CMAQ Performance Measures

GHG

Pursuant to negotiations in two lawsuits, FHWA agreed to temporarily not seek to enforce the February 1, 2024, deadline for States to submit initial targets and reports through March 29, 2024. On March 27, 2024 the U.S. District Court for the Northern District of Texas vacated and remanded the Final Rule to DOT, in effect nullifying the rule Nationwide. Consistent with the Court’s decision, States and MPOs are not required to submit initial targets and reports at this time. We will provide more information as we examine next steps.

• GHG Performance Measure
  • Joint Target Applicability Tables
• State DOT Initial Targets and Reporting Instructions
  • INFORMATION: Deadline for Initial Targets and Reports for Greenhouse Gas Measure. Dated January 26, 2024.
  • State DOT Initial GHG Reporting Form
  • Metric information for use in 2024 State Initial GHG Report
• U.S. DOT, Climate Change Center, Greenhouse Gas Analysis Resources and Tools page