U.S. Department of Transportation
Federal Highway Administration
1200 New Jersey Avenue, SE
Washington, DC 20590

Skip to content
Facebook iconYouTube iconTwitter iconFlickr iconLinkedInInstagram

Center for Accelerating Innovation

FHWA Home / OIPD / Accelerating Innovation / Every Day Counts / EDC-5: Unmanned Aerial Systems (UAS)

banner image for Unmanned Aerial Systems (UAS)

Unmanned Aerial Systems (UAS)

UAS offer several transformative aspects for highway transportation, enhancing safety and productivity and reducing cost.

Unmanned aerial systems (UAS), sometimes referred to as drones, are multi-use aircraft controlled from a licensed operator on the ground. The benefits of UAS are wide ranging and impact nearly all aspects of highway transportation—replacing boots on the ground, increasing accuracy, speeding up data collection, and providing access to hard-to-reach locations.

UAS provide high-quality survey and data mapping that can be collected automatically or remotely. Large areas can be mapped relatively quickly in comparison to traditional survey and mapping practices. Other uses include survey and imagery as part of emergency response events, where traditional surveying and mapping practices may be inadequate or sites impossible to access. UAS can supplement conventional activities, such as bridge safety inspection and routine construction inspection, to increase safety and collect data from otherwise unattainable perspectives.

Taking Inspection to New Heights

UAS improve operations, construction, inspection, and safety by collecting data needed to design, build, and operate the highway system. Bridge inspection enhanced by UAS improves safety for the inspection team and the traveling public by reducing the need for temporary work zones and specialized access equipment, which can also be very cost effective. Construction inspection with UAS allows for a bird’s eye view of a project’s progress and for the development of three-dimensional (3D) terrain models that document the construction process and assist in assessment of earthwork quantity measurement.

UAS technology gives State departments of transportation (DOTs) a new perspective during incident response for roadway disturbances such as rockslides, avalanches, and floods, and for damage assessment following earthquakes, fires, and bridge hits. It allows States to obtain quality data to make better-informed decisions, all collected from a relatively low-cost platform.


  • Safety. Keeping workers out of harm’s way is a major benefit of using UAS. Traditional bridge inspection requires setting up temporary work zones, detouring traffic, and using heavy equipment. UAS technology can speed data collection while reducing risk to work crews and the traveling public.
  • Accelerated Construction. UAS technology can accelerate the rate of data collection operations, such as survey or aerial photography, and facilitate exact quantity calculation and efficient payment to contractors. It can be used for routine inspections, such as flying a programmed path over silt fencing after a rain event to check for sediment buildup, and high-risk inspections, such as crane or falsework construction.
  • Asset Maintenance. The ability to routinely and consistently map terrain offers the potential for isolating problem areas before an emergency occurs, which can save lives and reduce costs for asset maintenance. If there is an emergency event, UAS technology can quickly and inexpensively survey the damage, allowing for better-informed and efficient recovery operations.

State of the Practice

UAS use is expanding across the State DOTs, and the number of UAS applications is increasing steadily. A 2019 survey by the American Association of State Highway and Transportation Officials found that 36 States are already using high-definition cameras, LiDAR, and other sensors to enhance construction inspection, bridge inspection, and incident response operations. In addition, 24 States are actively researching UAS use with an academic institution to expand their UAS operations.

  • Washington has evaluated UAS applications in aerial roadway surveillance and potentially for situational awareness for avalanche control.
  • North Carolina is using UAS to support construction inspections and perform accident scene reconstructions to open travel lanes more quickly.
  • New Jersey is currently using UAS to support structural inspections, real-time construction project monitoring, traffic incident management, aerial 3D corridor mapping, emergency response assessments, and traffic congestion assessments.
  • Ohio is using UAS technology for traffic monitoring, emergency response operations, and construction inspections.
Page last modified on March 4, 2022
Federal Highway Administration | 1200 New Jersey Avenue, SE | Washington, DC 20590 | 202-366-4000