Using Falling Weight Deflectometer Data With Mechanistic-Empirical Design and Analysis, Volume I: Final Report

BIBLIOGRAPHY

Abdallah, I., Williams, R., and Nazarian, S. (2009) “Application of Data Fusion Using Fuzzy Logic Method to Nondestructive Evaluation of Pavements.” Transportation Research Board 88th Annual Meeting. Preprint Paper No. 09-3078. Transportation Research Board, Washington,DC.

Abdallah, I., Nazarian, S., and Yuan, D. (2004) “Using Seismic Moduli in Structural Design of Flexible Pavements.” Proceedings, Geo-Trans 2004, Volume I. Geo-Institute of the American Society of Civil Engineers, Reston, VA.

Alavi, S., LeCates, J.F., and Tavares, M.P. (2008) “Falling Weight Deflectometer Usage.” National Cooperative Highway Research Program Synthesis of Highway Practice 381. Transportation Research Board, Washington, DC.

Alexander, D.R. and Barker, W.R. (1994) “Backcalculation of Material Properties Based on Non-Linear Material Behavior.” Proceedings, 4th International Conference, Bearing Capacity of Roads and Airfields, St. Paul, MN.

Algernon, D. and Hiltunen, D. (2009) “Real-Time Imaging of NDT Data in Combination with Scanning Techniques.” Transportation Research Board 88th Annual Meeting. Preprint Paper No. 09-3423. Transportation Research Board, Washington, DC.

Ali, H.A. and Tayabji, S.D. (1998) Mechanistic Evaluation of Test Data From LTPP Flexible Pavement Test Sections, Volume I: Final Report. Report No. FHWA-RD-98-012. Federal Highway Administration, Washington, DC.

Ali, H.A. and Tayabji, S.D. (1998) Mechanistic Evaluation of Test Data From LTPP Flexible Pavement Test Sections, Volume II: Final Report—Appendices. Report No. FHWA-RD-98-020. Federal Highway Administration, Washington, DC.

Ali, N.A. and Khosla, N.P. (1987) “Determination of Layer Moduli Using a Falling Weight Deflectometer.” Transportation Research Record 1117, p. 1–10. Transportation Research Board, Washington, DC.

Al-Khoury, R., Scarpas, A., Kasbergen, C., and Blaauwendraad, J. (2000) “Dynamic Interpretation of Falling Weight Deflectometer Test Results: Spectral Element Method.” Transportation Research Record 1716, p. 49–54. Transportation Research Board, Washington,DC.

Al-Khoury, R., Scarpas, A., Kasbergen, C., and van Gurp, C. (2001) “New Procedure for Pavement Parameter Identification from Falling Weight Deflectometer Test.” Transportation Research Record 1764, p. 39–43. Transportation Research Board, Washington, DC.

Al-Khoury, R., Scarpas, A., and van Gurp, C. (2002) “Asphalt Complex Moduli Determination Via FWD Test.” Proceedings, Ninth International Conference on Asphalt Pavements. International Society for Asphalt Pavements, St. Paul, MN.

Allen, D.L., Graves, R.C., and Fleckenstein, L.J. (1991) Laboratory and Field Evaluations and Correlations of Properties of Pavement Components. Report No. KTC-92-10. Kentucky Transportation Cabinet, Frankfort, KY.

Alvarez, C. and Thompson, M. (1998) Mechanistic-Empirical Evaluation of the MN/Road Mainline Flexible Pavement Sections. Report No. FHWA-IL-UI-263. Illinois Department of Transportation, Springfield, IL.

American Society of Civil Engineers. (2000) Pavement Subgrade, Unbound Materials, and Nondestructive Testing. GSP No. 98. American Society of Civil Engineers, Reston, VA.

Anderson, M. and Drnevich, V.P. (1989) “A True Dynamic Method for Nondestructive Testing of Rigid Pavements with Overlays.” Proceedings, 4th International Conference on Concrete Pavement Design and Rehabilitation. Purdue University, West Lafayette, IN.

Baladi, G.Y., Harichandran, R., Mukhtar, H., and Mahmood, T. (1994) Reduction of Rutting and Fatigue Cracking Under Heavy Vehicle Loads and Backcalculation of Layer Moduli: Final Report. Volume 2: Research Plan, Pavement Sections Selection, and Laboratory and Field Tests. Report No. GLCTTR 57/93-01-2. Michigan Department of Transportation, Lansing, MI.

Baladi, G.Y., Harichandran, R., Mukhtar, H., and Mahmood, T. (1994) Reduction of Rutting and Fatigue Cracking Under Heavy Vehicle Loads and Backcalculation of Layer Moduli: Final Report. Volume 3: Analysis, Discussion, Conclusions, and Recommendations. Report No. GLCTTR 57/93-01-3. Michigan Department of Transportation, Lansing, MI.

Baladi, G.Y., Harichandran, R., Mukhtar, H., and Mahmood, T. (1994) Reduction of Rutting and Fatigue Cracking Under Heavy Vehicle Loads and Backcalculation of Layer Moduli: Final Report. Volume 4: Appendix A: Field and Laboratory Test Data. Report No. GLCTTR 57/93-01-4. Michigan Department of Transportation, Lansing, MI.

Baltzer, S. and Jansen, J.M. (1994) “Temperature Correction of Asphalt-Moduli for FWD-Measurements.” Proceedings, 4th International Conference, Bearing Capacity of Roads and Airfields, St. Paul, MN.

Bayomy, F.M., Al-Kandari, F.A., and Smith, R.M. (1996) “Mechanistically Based Flexible Overlay Design System for Idaho.” Transportation Research Record 1543, p. 10–19. Transportation Research Board, Washington, DC.

Bayomy, F.M. and Nassar, W.M. (1997) “Mechanistic-Based Flexible Overlay Design System.” Proceedings, XIIIth World Meeting of the International Road Federation. International Road Federation, Washington, DC.

Bayomy, F.M., Al-Kandari, F., and Nassar, W.M. (1997) “Computer Aided Overlay Design System for Flexible Pavements.” Proceedings, Eighth International Conference on Asphalt Pavements. University of Washington, Seattle, WA.

Bayrak, M.B. and Ceylan, H. (2008) “Neural Network-Based Approach for the Analysis of Rigid Pavement Systems Using Deflection Data.” Transportation Research Record 2068, p. 61–70. Transportation Research Board, Washington, DC.

Bendana, L.J., Yang, W.S., McAuliffe, D., and Lu, J. (1994) Interpreting Data from the Falling-Weight Deflectometer. Report No. FHWA/NY/RR-94/160. New York State Department of Transportation, Albany, NY.

Briggs, R.C. (1991) “Use of the Falling Weight Deflectometer by the Texas State Department of Highways and Public Transportation.” Proceedings, Strategic Highway Research Program Products. American Society of Civil Engineers, New York, NY.

Briggs, R.C. and Lukanen, E.O. (2000) “Variations in Backcalculated Pavement Layer Moduli in LTPP Seasonal Monitoring Sites.” Symposium on Nondestructive Testing of Pavements and Backcalculation of Moduli: Third Volume. ASTM STP 1375. ASTM International, West Conshohocken, PA.

Brunton, J.M. and D’Almeida, J.R. (1992) “Modeling Material Nonlinearity in a Pavement Backcalculation Procedure.” Transportation Research Record 1377, p. 99–106. Transportation Research Board, Washington, DC.

Bush, A.J., Brown, R.W., and Bailey, C.E. (1989) “An Evaluation Procedure for Rigid Airfield Pavements.” Proceedings, 4th International Conference on Concrete Pavement Design and Rehabilitation. Purdue University, West Lafayette, IN.

Cary, C. and Zapata, C.E. (2009) “Evaluating the Utility of Existing Pavement Management System State Deflection Data for Use in the Implementation of the ME-PDG for Arizona.” Transportation Research Board 88th Annual Meeting. Preprint Paper No. 09-3199. Transportation Research Board, Washington, DC.

Ceylan, H. (2008) “A Neural Network-Based Rapid Backcalculation Model for Composite Pavement Systems.” Transportation Research Board 87th Annual Meeting. Preprint Paper No.08-2416. Transportation Research Board, Washington, DC.

Chang, G.K. and Meegoda, J.N. (1999) “Micromechanical Model for Temperature Effects of Hot-Mix Asphalt Concrete.” Transportation Research Record 1687, p. 95–103. Transportation Research Board, Washington, DC.

Chatti, K., Yun, K.K., Kim, H.B., and Utamsingh, R. (1995) Paccar Full-Scale Pavement Tests. Report No. GLCTTR 75-95/01. Michigan State University and Great Lakes Center for Truck and Transit Research, Ann Arbor, MI.

Chatti, K. and Kim, T.K. (2000) “Effect of Frequency-Dependent Asphalt Concrete Layer Moduli on Pavement Response.” Symposium on Nondestructive Testing of Pavements and Backcalculation of Moduli: Third Volume. ASTM STP 1375. ASTM International, West Conshohocken, PA.

Chatti, K., Ji, Y., and Harichandran, R. (2004) “Dynamic Time Domain Backcalculation of Layer Moduli, Damping, and Thicknesses in Flexible Pavements.” Transportation Research Record 1869, p. 106-116. Transportation Research Board, Washington, DC.

Chen, D.H., Fernando, E., and Murphy, M. (1996) “Application of Falling Weight Deflectometer Data for Analysis of Superheavy Loads.” Transportation Research Record 1540, p. 83–90. Transportation Research Board, Washington, DC.

Choi, J.W., Wu, R., and Pestana, J.M. (2007) “Application of Constrained Extended Kalman Filter in Layer Moduli Backcalculation.” Transportation Research Board 86th Annual Meeting. Preprint Paper No. 07-1837. Transportation Research Board, Washington, DC.

Chou, Y.J. and Lytton, R.L. (1991) “Accuracy and Consistency of Backcalculated Pavement Layer Moduli.” Transportation Research Record 1293, p. 72–85. Transportation Research Board, Washington, DC.

Crovetti, J.A. (2002) Comprehensive Subgrade Deflection Acceptance Criteria—Executive Summary. Report No. WI/SPR-05-02. Wisconsin Department of Transportation, Madison, WI.

Darter, M.I., Smith, K.D., and Hall, K.T. (1992) “Concrete Pavement Backcalculation Results from Field Studies.” Transportation Research Record 1377, p. 7–16. Transportation Research Board, Washington, DC.

Darter, M.I., Titus-Glover, L., and Mallela, J. (2005) “Concrete Overlay Design of Flexible Pavement Using the NCHRP 1-37A Design Guide.” Proceedings, 8th International Conference on Concrete Pavements. Denver, CO.

Dawson, T.A., Baladi, G.Y., Sessions, C.P., and Haider, S.W. (2009) “Backcalculated and Laboratory Measured Resilient Modulus Values.” Transportation Research Board 88th Annual Meeting. Preprint Paper No. 09-1943. Transportation Research Board, Washington, DC.

Diefenderfer, B.K. (2008) Network-Level Pavement Evaluation of Virginia's Interstate System Using the Falling Weight Deflectometer. Final Report. VTRC 08-R18. Project No. 77209. Virginia Transportation Research Council and Virginia Department of Transportation, Charlottesville, VA.

Dongre, R.N., D’Angelo, J.A., and Myers, L.A. (2006) “Conversion of Testing Frequency to Loading Time: Impact on Performance Predictions Obtained from Mechanistic-Empirical Pavement Design Guide.” Transportation Research Board 85th Annual Meeting. Preprint Paper No. 06-2394. Transportation Research Board, Washington, DC.

Donovan, P. and Tutumluer, E. (2009) “Use of Falling-Weight Deflectometer Testing to Determine Relative Damage in Asphalt Pavement Unbound Aggregate Layers.” Transportation Research Board 88th Annual Meeting. Preprint Paper No. 09-2056. Transportation Research Board, Washington,DC.

Elfino, M.K., Choubane, B., and McQueen, R.D. (1995) “Pavement Evaluation in Virginia: State of the Practice.” Transportation Research Record 1505, p. 85–94. Transportation Research Board, Washington, DC.

Elliott, R.P., Hall, K.D., Morrison, N.T., and Hong, K.S. (1990) The Development of Roadhog, A Flexible Pavement Overlay Design Procedure. NDT Overlay Design. Report No. FHWA/AR-91/003. Arkansas State Highway and Transportation Department, Little Rock, AR.

Farouki, O.T. and Matter, N.S. (1994) “Development and Evaluation of a New Backcalculation Computer Program Based on a Finite Element Model.” Proceedings, 4th International Conference, Bearing Capacity of Roads and Airfields. St. Paul, MN.

Federal Highway Administration. (2000) LTPP Manual for Falling Weight Deflectometer Measurements Operational Field Guidelines. Version 3.1. U.S. Department of Transportation, Washington, DC.

Fernando, E.G. and Liu, W. (2000) User’s Guide for the Modulus Temperature Correction Program (MTCP). Publication No. FHWA/TX-01/1863-2. Texas Department of Transportation, Austin, TX.

Flintsch, G.W., Appea, A., Al-Qadi, I.L., and Loulizi, A. (2001) “Backcalculation Validation Through Field Instrumentation Response at the Virginia Smart Road.” Proceedings, Second International Symposium on Maintenance and Rehabilitation of Pavements and Technological Control. Auburn University, Auburn, AL.

Flintsch, G.W., Al-Qadi, I.L., Loulizi, A., Lahouar, S., McGhee, K.K., and Clark, T. (2005) Field Investigation of High Performance Pavements in Virginia. Report No. VTRC 05-CR9. Virginia Department of Transportation, Richmond, VA.

Fontul, S. and Antunes, M. (2003) “Structural Evaluation of Pavements Using Neural Networks.” Proceedings, Maintenance and Rehabilitation of Pavements and Technological Control. University of Minho, Guimaraes, Portugal.

Foxworthy, P.T. and Darter, M.I. (1989) “ILLI-Slab and FWD Deflection Basins for Characterization of Rigid Pavements.” First International Symposium on Nondestructive Testing of Pavements and Backcalculation of Moduli. ASTM STP 1026. ASTM International, West Conshohocken, PA.

Fwa, T.F. and Setiadji, B.H. (2008) “Backcalculation Analysis of Rigid Pavement Properties Considering Presence of Subbase Layer.” Transportation Research Board 87th Annual Meeting. Preprint Paper No. 08-0434. Transportation Research Board, Washington, DC.

Fwa, T.F., Tan, C.Y., and Chan, W.T. (1997) “Backcalculation Analysis of Pavement-Layer Moduli Using Genetic Algorithms.” Transportation Research Record 1570, p. 134–142. Transportation Research Board, Washington, DC.

Fwa, T.F., Tan, K.H., and Li, S. (2000) “Closed-Form and Semi-Closed Form Algorithms for Backcalculation of Concrete Pavement Parameters.” Symposium on Nondestructive Testing of Pavements and Backcalculation of Moduli: Third Volume. ASTM STP 1375. ATM International, West Conshohocken, PA.

Galal, K.A., Diefenderfer, B.K., and Alam, J. (2007) Determination by the Falling Weight Deflectometer of the In-Situ Subgrade Resilient Modulus and Effective Structural Number for I‑77 in Virginia. Final Report. Virginia Transportation Research Council and Virginia Department of Transportation, Richmond, VA.

Garg, N. and Thompson, M.R. (1998) Mechanistic-Empirical Evaluation of the MN/Road Low Volume Road Test Sections. Report No. FHWA-IL-UI-262. Illinois Department of Transportation, Springfield, IL.

Gedafa, D., Hossain, M., Miller, R., and Van, T. (2009) “Estimation of Remaining Service Life of Flexible Pavements from Surface Deflections.” Transportation Research Board 88th Annual Meeting. Preprint Paper No. 09-2964. Transportation Research Board, Washington, DC.

George, K.P. and Uddin, W. (1993) “Verifying Kneading Resilient Modulus of Soils with Backcalculated Values.” Transportation Research Record 1406, p. 116-123. Transportation Research Board, Washington, DC.

Germann, F.P. and Lytton, R.L. (1989) “Temperature, Frequency, and Load Level Correction Factors for Backcalculated Moduli Values.” First International Symposium on Nondestructive Testing of Pavements and Backcalculation of Moduli. ASTM STP 1026. ASTM International, West Conshohocken, PA.

Gopalakrishnan, K., Thompson, M.R., and Manik, A. (2006) “Rapid Finite-Element Based Airport Pavement Moduli Solutions Using Neural Networks.” International Journal of Computational Intelligence 3(1), p. 63–71. World Enformatika Society.

Grenier, S. and Konrad, J.M. (2007) “Backcalculation of Asphalt Concrete Layer Thickness Using Static and Dynamic Interpretations of FWD Tests.” Transportation Research Board 86th Annual Meeting. Preprint Paper No. 07-0573. Transportation Research Board, Washington, DC.

Hadidi, R., Gucunski, N., Zaghloul, S., Vitillo, N., and Shokouhi, P. (2006) “Development of Paving Layer ModuliTemperature Correction Models for Seismic Pavement Analyzer (SPA) in New Jersey.” Transportation Research Board 85th Annual Meeting. Preprint Paper No. 06-2722. Transportation Research Board, Washington, DC.

Hadidi, R. and Gucunski, N. (2007) “A Probabilistic Approach to Falling-Weight Deflectometer Backcalculation.” Transportation Research Board 86th Annual Meeting. Preprint Paper No. 07‑3187. Transportation Research Board, Washington, DC.

Hall, K.D. and Watkins, Q.B. (1995) “Comparison of AASHTO and Roadhog Flexible Pavement Overlay Design Procedures.” Transportation Research Record 1482, p. 94–101. Transportation Research Board, Washington, DC.

Hall, K.D. and Elliott, R.P. (1992) “ROADHOG―A Flexible Pavement Overlay Design Procedure (with Discussion and Closure).” Transportation Research Record 1374, p. 9–18. Transportation Research Board, Washington, DC.

Hall, K.T., Darter, M.I., and Kuo, C.M. (1995) “Improved Methods for Selection of K Value for Concrete Pavement Design.” Transportation Research Record 1505, p. 128–136. Transportation Research Board, Washington, DC.

Hall, K.T. and Mohseni, A. (1991) “Backcalculation of Asphalt Concrete-Overlaid Portland Cement Concrete Pavement Layer Moduli.” Transportation Research Record 1293, p. 112–123. Transportation Research Board, Washington, DC.

Harichandran, R.S., Mahmood, T., Raab, A.R., and Baladi, G.Y. (1993) “Modified Newton Algorithm for Backcalculation of Pavement Layer Properties.” Transportation Research Record 1384, p. 15–22. Transportation Research Board, Washington, DC.

Hassan, H.F., Mousa, R.M., and Gadallah, A.A. (2003) “Comparative Analysis of Using AASHTO and WESDEF Approaches in Back-Calculation of Pavement Layer Moduli.” Journal of Transportation Engineering 129(3), p. 322–329. American Society of Civil Engineers, Reston,VA.

Herrin, S.M., McQueen, R.D., Darter, M.I., Fuselier, G., and Grubbs, J.S. (2008) “25 Years of NDT Analysis: Runway 1L-19R at Washington Dulles International Airport.” Airfield and Highway Pavements: Efficient Pavements Supporting Transportation’s Future. American Society of Civil Engineers, Bellevue, WA.

Hoffman, M.S. (2003) “Direct Method for Evaluating Structural Needs of Flexible Pavements With Falling-Weight Deflectometer Deflections.” Transportation Research Record 1860,
p. 41–47. Transportation Research Board, Washington, DC.

Hoffmann, O.J.M., Guzina, B.B., and Drescher, A. (2004) “Stiffness Estimates Using Portable Deflectometers.” Transportation Research Record 1869, p. 59–66. Transportation Research Board, Washington, DC.

Holzschuher, C. and Lee, H.S. (2006) Falling Weight Deflectometer Handbook. Florida Department of Transportation, Tallahassee, FL.

Hong, F., Pereira, F.M., and Prozzi, J.A. (2006) “Comparison of Equivalent Single-Axle Loads from Empirical and Mechanistic-Empirical Approaches.” Transportation Research Board 85th Annual Meeting. Preprint Paper No. 06-1874. Transportation Research Board, Washington, DC.

Hossain, A.S.M.M. and Zaniewski, J.P. (1991) “Characterization of Falling Weight Deflectometer Deflection Basin.” Transportation Research Record 1293, p. 1–11. Transportation Research Board, Washington, DC.

Hossain, A.S.M.M. and Zaniewski, J.P. (1991) “Detection and Determination of Depth of Rigid Bottom in Backcalculation of Layer Moduli from Falling Weight Deflectometer Data.” Transportation Research Record 1293, p. 124–135. Transportation Research Board, Washington,DC.

Hossain, M. and Scofield, L.A. (1992) “Correlation Between Backcalculated and Laboratory-Determined Asphalt Concrete Moduli.” Transportation Research Record 1377, p. 67–76. Transportation Research Board, Washington, DC.

Hossain, M.M. and Yang, W.S. (2000) “Determination of Concrete Pavement Surface Layer Modulus and Thickness Using Nondestructive Deflection Testing.” Structural Materials Technology IV—An NDT Conference. Technomic Publishing Company, Inc., Lancaster, PA.

Howard, I.L. and Warren, K.A. (2008) “How Well Does the Falling Weight Deflectometer Simulate Traffic Loads for Thin Low Volume Pavements?” Transportation Research Board 87th Annual Meeting. Preprint Paper No. 08-1665. Transportation Research Board, Washington, DC.

Hoyinck, W.T. and Kuijper, R. (1994) “Visco-Elasticity in Traveling Deflectometers.” Proceedings, 4th International Conference, Bearing Capacity of Roads and Airfields. St. Paul,MN.

Huston, W.N., Mamlouk, M.S., and Perera, R.W.S. (1992) “Laboratory Versus Nondestructive Testing for Pavement Design.” Journal of Transportation Engineering 118(2), p. 207–222. American Society of Civil Engineers, Reston, VA.

Irwin, L.H. and Richter, C.A. (2005) “History and Development of U.S. Procedures for Falling Weight Deflectometer Calibration.” Transportation Research Record 1905, p. 67–72. Transportation Research Board, Washington, DC.

Jacoby, G. (2008) “Analysis and Interpretation of Falling Weight Deflectometer Data.” Proceedings, 23rd ARRB Conference. ARRB Group Limited, Victoria, Australia.

Jiang, Y.J. and Tayabji, S.D. (2000) “Evaluation of Concrete Pavement Conditions and Design Features Using LTPP FWD Deflection Data.” Symposium on Nondestructive Testing of Pavements and Backcalculation of Moduli: Third Volume. ASTM STP 1375. ASTM International, West Conshohocken, PA.

Johnson, A.M. and Baus, R.L. (1992) “Alternative Method for Temperature Correction of Backcalculated Equivalent Pavement Moduli.” Transportation Research Record 1355, p. 75–81. Transportation Research Board, Washington, DC.

Johnson, A.M. and Baus, R.L. (1993) “Simplified Direct Calculation of Subgrade Modulus from Nondestructive Pavement Deflection Testing.” Transportation Research Record 1406,
p. 133–141. Transportation Research Board, Washington, DC.

Jooste, F., Kekwick, S.V., and Muthen, M. (1998) “Effect of Allowable Thickness Variation on Backcalculated Moduli.” Transportation Research Record 1639, p. 43–52. Transportation Research Board, Washington, DC.

Kang, Y.V. (2000) “Use of Multifrequency Backcalculation for Determining Moduli of a Pavement Structure.” Symposium on Nondestructive Testing of Pavements and Backcalculation of Moduli: Third Volume. ASTM STP 1375. ASTM International, West Conshohocken, PA.

Khosla, N.P. (1986) Nondestructive Structural Evaluation of Pavements. Volume II—User’s Manual. Publication No. FHWA/NC-89/010. North Carolina Department of Transportation, Raleigh, NC.

Khosla, N.P. and Ali, N.A. (1989) “A Mechanistic Method for Evaluation of Layer Moduli and Overlay Design.” First International Symposium on Nondestructive Testing of Pavements and Backcalculation of Moduli. ASTM STP 1026. ASTM International, West Conshohocken, PA.

Killingsworth, B. and Von Quintus, H. (1997) Backcalculation of Layer Moduli of LTPP General Pavement Study (GPS) Sites. Report No. FHWA-RD-97-086. Federal Highway Administration, Washington, DC.

Kim, J.R., Kang, H.B., Kim, D., Park, D.S., and Kim, W.J. (2007) “Evaluation of In Situ Modulus of Compacted Subgrades Using Portable Falling Weight Deflectometer and Plate-Bearing Load Test.” Journal of Materials in Civil Engineering 19(6), p. 492–499. American Society of Civil Engineers, Reston, VA.

Kim, O.K. and Nokes, W.A. (1993) Evaluation of Backcalculation Methods to Predict Pavement Layer Moduli. Report No. FHWA/CA/TL-94/11. California Department of Transportation, Sacramento, CA.

Kim, S., Ceylan, H., Gopalakrishnan, K., and Heitzman, M. (2006) “Sensitivity Study of Iowa Flexible Pavements Using Mechanistic-Empirical Pavement Design Guide.” Transportation Research Board 85th Annual Meeting. Preprint Paper No. 06-2139. Transportation Research Board, Washington, DC.

Kim, Y.R., Hibbs, B.O., and Lee, Y.C. (1994) “New Temperature Correction Procedure for FWD Deflections of Flexible Pavements.” Proceedings, 4th International Conference, Bearing Capacity of Roads and Airfields. St. Paul, MN.

Kim, Y.R., Hibbs, B.O., and Lee, Y.C. (1995) “Temperature Correction of Deflections and Backcalculated Asphalt Concrete Moduli.” Transportation Research Record 1473, p. 55–62. Transportation Research Board, Washington, DC.

Kim, Y.R., Khosla, N.P., Satish, S., and Scullion, T. (1992) “Validation of Moduli Backcalculation Procedure Using Multidepth Deflectometers Installed in Various Flexible Pavement Structures.” Transportation Research Record 1377, p. 128–142. Transportation Research Board, Washington, DC.

Kim, Y.R., Lee, Y.C., and Ranjithan, S.R. (2000) “Flexible Pavement Condition Evaluation Using Deflection Basin Parameters and Dynamic Finite Element Analysis Implemented by Artificial Neural Networks.” Symposium on Nondestructive Testing of Pavements and Backcalculation of Moduli: Third Volume. ASTM STP 1375. ASTM International, West Conshohocken, PA.

Kothandram, S. and Ioannides, A.M. (2001) “DIPLODEF: A Unified Backcalculation System for Asphalt and Concrete Pavements.” Transportation Research Record 1764, p. 20–29. Transportation Research Board, Washington, DC.

LaCroix, A.T., Kim, Y.R., and Ranjithan, S.R. (2008) “Backcalculation of Dynamic Modulus from Resilient Modulus of Asphalt Concrete with an Artificial Neural Network.” Transportation Research Record 2057, p. 107–113. Transportation Research Board, Washington, DC.

Lee, Y.H., Lee, C.T., and Bair, J.W. (1998) “Modified Deflection Ratio Procedures for Backcalculation of Concrete Pavements.” Airport Facilities: Innovations for the Next Century. Proceedings of the 25th International Air Transportation Conference. American Society of Civil Engineers, Reston, VA.

Litwinowicz, A. (2004) “Pavement Deflection Testing and Evaluation by Back Analysis: Time for a Reality Check?” Road & Transport Research: The Journal of Australian and New Zealand Research and Practice 13(3), p. 25–35. ARRB Transport Research, Victoria, Australia.

Liu, W. and Scullion, T. (2001) MODULUS 6.0 for Windows: User’s Manual. Publication No. FHWA/TX-05/0-1869-2. Texas Department of Transportation, Austin, TX.

Livneh, M. (2001) “Thickness-Deficiency Determination for Overlay Design of Flexible Pavements.” Proceedings, Second International Symposium on Maintenance and Rehabilitation of Pavements and Technological Control. Auburn University, Auburn, AL.

Loizos, A., Boukovalas, G., and Karlaftis, A. (2003) “Dynamic Stiffness Modulus for Pavement Subgrade Evaluation.” Journal of Transportation Engineering 129(4), p. 434–443. American Society of Civil Engineers, Reston, VA.

Loizos, A. and Boukovalas, G. (2005) “Pavement Soil Characterization Using a Dynamic Stiffness Model.” International Journal of Pavement Engineering 6(1), p. 5–15. Taylor & Francis Limited, London, United Kingdom.

Lu, Q., Jones, D., and Harvey, J.T. (2007) Reflective Cracking Study: Backcalculation of HVS Test Section Deflection Measurements. Report No. CA091073M. California Department of Transportation, Sacramento, CA.

Lu, Q., Signore, J.M., Basheer, I., Ghuzlan, K., and Ullidtz, P. (2008) “Calback: Enhancing Caltrans Mechanistic-Empirical Design Process With New Backcalculation Software.” Transportation Research Board 87th Annual Meeting. Preprint Paper No. 08-2303. Transportation Research Board, Washington, DC.

Lytton, R.L., Germann, F.P., Chou, Y.J., and Stoffels, S.M. (1990) Determining Asphaltic Concrete Pavement Structural Properties by Nondestructive Testing. NCHRP Report No. 327. Transportation Research Board, Washington, DC.

Maestas, J.M. and Mamlouk, M.S. (1992) “Comparison of Pavement Deflection Analysis Methods Using Overlay Design.” Transportation Research Record 1377, p. 17–25. Transportation Research Board, Washington, DC.

Maher, A., Gucunski, N., and Bennert, T. (2005) Implementation of Mechanistic Pavement Design: Field and Laboratory Implementation. Final Report. Report No. ELF-RU7072. Federal Highway Administration, Washington, DC.

Mahoney, J.P., Winters, B.C., Jackson, N.C., and Pierce, L.M. (1993) “Some Observations About Backcalculation and Use of a Stiff Layer Condition.” Transportation Research Record 1384, p. 8–14. Transportation Research Board, Washington, DC.

Mahoney, J.P., Pierce, L.M., and Copstead, R.L. (1996) Estimation of Seasonal Effects for Pavement Design and Performance. Volume 3. Report No. FHWA-FLP-95-008. U.S. Forest Service and Federal Highway Administration, Washington, DC.

Mahoney, J.P., Coetzee, N.F., Stubstad, R.N., and Lee, S.W. (1989) “A Performance Comparison of Selected Backcalculation Computer Programs.” First International Symposium on Nondestructive Testing of Pavements and Backcalculation of Moduli. ASTM STP 1026. ASTM International, West Conshohocken, PA.

Maina, J.W. and Yokota, H. (2000) “Dynamic Backcalculation and Overlay Design Based on FWD Data.” Symposium on Nondestructive Testing of Pavements and Backcalculation of Moduli: Third Volume. ASTM STP 1375. ASTM International, West Conshohocken, PA.

Maina, J.W., Matsui, K., Kikuta, Y., and Inoue T. (2004) “Dynamic Backcalculation of Pavement Structure Using Multiple Sets of Time-Series Data.” Proceedings of Geo-Trans 2004, Volume I. Geo-Institute of the American Society of Civil Engineers, Reston, VA.

Malla, R.B. and Joshi, S. (2007) “Resilient Modulus Prediction Models Based on Analysis of LTPP Data for Subgrade Soils and Experimental Verification.” Journal of Transportation Engineering 133(9), p. 491–504. American Society of Civil Engineers, Reston, VA.

Mallela, J. and George, K.P. (1994) “Three-Dimensional Dynamic Response Model for Rigid Pavements.” Transportation Research Record 1448, p. 92–99. Transportation Research Board, Washington, DC.

Mallick, R.B., Das, A., and Nazarian S. (2005) “Fast Nondestructive Field Test Method to Determine Stiffness of Subsurface Layer in Thin Surface Hot-Mix Asphalt Pavement.” Transportation Research Record 1905, p. 82–89. Transportation Research Board, Washington,DC.

Mamlouk, M.S., Zaniewski, J.P., Houston W.N., and Houston S.L. (1990) “Overlay Design Method for Flexible Pavements in Arizona.” Transportation Research Record 1286, p. 112–122. Transportation Research Board, Washington, DC.

Mamlouk, M.S., Houston, W.N., McBrien, E.F., Houston, S.L., and Zaniewski J.P. (1988) Rational Characterization of Pavement Structures using Deflection Analysis. Volume I—Research Results & Findings. Report No. FHWA-AZ88-254. Arizona Department of Transportation, Phoenix, AZ.

Marchionna, A., Fornaci, M.G., and Malgarini M. (1987) “Evaluation of Flexible Pavements and Overlay Design Based on FWD Tests.” Proceedings, Sixth International Conference, Structural Design of Asphalt Pavements. Ann Arbor, MI.

Matsui, K., Maina, J.W., Dong, Q., and Sasaki, Y. (2003) “A Fast Dynamic Backcalculation of Layer Moduli Using Axi-Symmetric Approach.” International Journal of Pavements 2(2),
p. 75–87. University of Mississippi, University, MS.

Matsui, K., Maina, J.W., and Nishizawa, T. (2005) “Structural Evaluation of Concrete Pavements Based on Static and Dynamic Backanalysis.” Proceedings, 8th International Conference on Concrete Pavements. Denver, CO.

Matsui, K., Hachiya, Y., Maina, J.W., Kikuta, Y., and Nagae, T. (2006) “Influence of Seed Layer Moduli on Finite-Element Method Based Modulus Backcalculation Results.” Transportation Research Board 85th Annual Meeting. Preprint Paper No. 06-2816. Transportation Research Board, Washington, DC.

Mehta, Y. and Roque, R. (2003) “Evaluation of FWD Data for Determination of Layer Moduli of Pavements.” Journal of Materials in Civil Engineering 15(1), p. 25–31. American Society of Civil Engineers, Reston, VA.

Meier, R.W. and Rix, G.J. (1995) “Backcalculation of Flexible Pavement Moduli from Dynamic Deflection Basins using Artificial Neural Networks.” Transportation Research Record 1473, p.72–81. Transportation Research Board, Washington, DC.

Meier, R.W., Alexander, D.R., and Freeman, R.B. (1997) “Using Artificial Neural Networks as a Forward Approach to Backcalculation.” Transportation Research Record 1570, p. 126–133. Transportation Research Board, Washington, DC.

Meshkani, A., Abdallah, I.N., and Nazarian, S. (2003) “Feasibility of Backcalculation of Nonlinear Flexible Pavement Layer Parameters from Nondestructive Testing.” Transportation Research Record 1860, p. 16–25. Transportation Research Board, Washington, DC.

Mohammad, L.N., Gaspard, K., Herath, A., and Nazzal, M.D. (2007) Comparative Evaluation of Subgrade Resilient Modulus from Non-destructive, In Situ, and Laboratory Methods. Report No. FHWA/LA.06/417. Louisiana Department of Transportation and Development, Baton Rouge, LA, and Federal Highway Administration, Washington, DC.

Molenaar, A. (2009) “Backcalculation Procedure for Stiffness Modulus of Cement-Treated Base Layers Using Computational Intelligence-Based Models.” Transportation Research Board 88th Annual Meeting. Preprint Paper No. 09-0523. Transportation Research Board, Washington, DC.

Motta, L., Medina, J., Macedo, J.A.G., and Albernaz, C.V. (1997) “Comparative Studies of Deflectometry with Benkelman Beam and FWD Supported by Mechanistic Analysis and Repeated Load Testing.” Proceedings, Eighth International Conference on Asphalt Pavements. University of Washington, Seattle, WA.

Mun, S. and Kim, Y.R. (2009) “Backcalculation of Subgrade Stiffness Under Rubblised PCC Slabs Using Multilevel FWD Loads.” International Journal of Pavement Engineering 10(1), p.9–18. North Carolina State University, Raleigh, NC, and Taylor & Francis Limited, London, United Kingdom.

Nazarian, S. and Boddapati, K.M. (1995) “Pavement-Falling Weight Deflectometer Interaction Using Dynamic Finite-Element Analysis.” Transportation Research Record 1482, p. 33–43. Transportation Research Board, Washington, DC.

Nazef, A. and Choubane, B. (2002) “Survey of Current Practices of Using Falling Weight Deflectometers.” Proceedings, 2002 Pavement Evaluation Conference. Richmond, VA.

Nazzal, M.D., Abu-Farsakh, M.Y., Alshibli, K.A., and Louay, M.N. (2007) “Evaluating the Light Falling Weight Deflectometer Device for In Situ Measurement of Elastic Modulus of Pavement Layers.” Transportation Research Record 2016, p. 13–22. Transportation Research Board, Washington, DC.

Newcomb, D.E., Lee, S.W., Mahoney, J.P., and Jackson, N.C. (1989) “The Use of Falling Weight Deflectometer Data in Monitoring Flexible Pavement Systems.” First International Symposium on Nondestructive Testing of Pavements and Backcalculation of Moduli. ASTM STP 1026. ASTM International, West Conshohocken, PA.

Newcomb, D.E., Van Deusen, D.A., Jiang, Y., and Mahoney, J.P. (1995) “Considerations of Saturated Soil Conditions in Backcalculation of Pavement Layer Moduli.” Transportation Research Record 1473, p. 63–71. Transportation Research Board, Washington, DC.

Nishizawa, T., Himeno, K., Marliyama, T., and Saika, Y. (1994) “Comparison of Static and Dynamic FEM Analyses in Connection with Backcalculation of Pavement Layer Moduli Based on FWD Deflection Data.” Proceedings, 4th International Conference on Bearing Capacity of Roads and Airfields. St. Paul, MN.

Nokes, W.A. (1993) Evaluation of Mechanistic Procedures for Assessment of Structural Section Performance. Report No. FHWA-CA/TL-93-03. California Department of Transportation, Sacramento, CA.

Noureldin, A.S. (1993) “New Scenario for Backcalculation of Layer Moduli of Flexible Pavements.” Transportation Research Record 1384, p. 23–28. Transportation Research Board, Washington, DC.

Orr, D. (2003) “Detection of Nonresilient Behavior in Pavements with a Falling Weight Deflectometer.” Transportation Research Record 1860, p. 26–32. Transportation Research Board, Washington, DC.

Ovik, J.M., Birgisson, B., and Newcomb, D.E. (2000) “Seasonal Variations in Backcalculated Pavement Layer Moduli in Minnesota.” Symposium on Nondestructive Testing of Pavements and Backcalculation of Moduli: Third Volume. ASTM STP 1375. ASTM International, West Conshohocken, PA.

Park, S.W. and Kim, Y.R. (1997) “Temperature Correction of Backcalculated Moduli and Deflections Using Linear Viscoelasticity and Time-Temperature Superposition.” Transportation Research Record 1570, p. 108–117. Transportation Research Board, Washington, DC.

Parker, F. (1991) “Estimation of Paving Materials Design Moduli From Falling Weight Deflectometer Measurements.” Transportation Research Record 1293, p. 42–51. Transportation Research Board, Washington, DC.

Perera, R.W., Gemayel, C.A., and Kohn, S.D. (1994) “Use of Nondestructive Testing in Evaluating Composite Pavements.” Proceedings, 4th International Conference on Bearing Capacity of Roads and Airfields. Vol. 2. Minneapolis, MN.

Pierce, L.M., Jackson, N.C., and Mahoney, J.P. (1993) “Development and Implementation of a Mechanistic, Empirically Based Overlay Design Procedure for Flexible Pavements.” Transportation Research Record 1388, p. 120–128. Transportation Research Board, Washington,DC.

Pologruto, M. (2001) “Procedure for Use of Falling Weight Deflectometer to Determine AASHTO Layer Coefficients.” Transportation Research Record 1764, p. 11–19. Transportation Research Board, Washington, DC.

Prozzi, J.A. and Hong, F. (2006) “Seasonal Time Series Models for Supporting Traffic Input Data for Mechanistic-Empirical Design Guide.” Transportation Research Board 85th Annual Meeting. Preprint Paper No. 06-1450. Transportation Research Board, Washington, DC.

Pumphrey, N.D. and White, T.D. (1989) Development of an Asphaltic Concrete Overlay Design Procedure for Rigid Pavements in Indiana. Report No. FHWA/IN/JHRP-89/14. Indiana Department of Transportation, Indianapolis, IN.

Rada, G.R. and Witczak, M.W. (1994) “Dynamic Design of AC Overlays Using Deflection Testing.” Proceedings, 4th International Conference on Bearing Capacity of Roads and Airfields. St. Paul, MN.

Rada, G.R., Richter, C.A., and Stephanos, P.J. (1992) “Layer Moduli from Deflection Measurements: Software Selection and Development of Strategic Highway Research Program’s Procedure for Flexible Pavements.” Transportation Research Record 1377, p. 77–87. Transportation Research Board, Washington, DC.

Rada, G.R., Shepherd, K.L., Zeigler, T.D., and Smith, T.E. (1997) “Montana’s Automated Deflection Analysis Procedure.” Transportation Research Record 1570, p. 151–162. Transportation Research Board, Washington, DC.

Rada, G.R., Witczak, M.W., and Rabinow, S.D. (1988) “Comparison of AASHTO Structural Evaluation Techniques Using Nondestructive Deflection Testing.” Transportation Research Record 1207, p. 134–144. Transportation Research Board, Washington, DC.

Rahman, F., Hossain, M., Hunt, M.M., and Romanoschi, S.A. (2008) “Evaluation of Subgrade Resilient Modulus for Pavement Design Using Mechanistic-Empirical Pavement Design Guide.” Transportation Research Board 87th Annual Meeting. Preprint Paper No. 08-2673. Transportation Research Board, Washington, DC.

Reddy, M.A., Reddy, K.S., and Pandey, B.B. (2004) “Selection of Genetic Algorithm Parameters for Backcalculation of Pavement Moduli.” International Journal of Pavement Engineering 5(2), p. 81–90. Taylor & Francis Limited, London, United Kingdom.

Richter, C. (1997) Improved Guidance for Users of the 1993 AASHTO Flexible Pavement Design Procedures. Publication No. FHWA-RD-97-091. Federal Highway Administration, Washington, DC.

Richter, C.A. and Schwartz, C.W. (2003) “Modeling Stress- and Moisture-Induced Variations in Pavement Layer Moduli.” Transportation Research Record 1860, p. 33–40. Transportation Research Board, Washington, DC.

Robinette, C. and Williams, R.C. (2006) “Pavement Design Analysis Using AASHTO 2002 Design Guide Software.” Transportation Research Board 85th Annual Meeting. Preprint Paper No. 06-1703. Transportation Research Board, Washington, DC.

Rohde, G.T. (1994) “Determining Pavement Structural Number From FWD Testing.” Transportation Research Record 1448, p. 62-68. Transportation Research Board, Washington,DC.

Rozycki, D.K., Wilde, W.J., and Rasmussen, R.O. (2001) “A New Approach to Non-Destructive Evaluation of Pavement Structures using the Rolling Dynamic Deflectometer.” Seventh International Conference on Concrete Pavements—The Use of Concrete in Developing Long-Lasting Pavement Solutions for the 21st Century. International Society for Concrete Pavements. College Station, TX.

Rutherford, M. (1993) Road Rater Study. Report No. WA-RD 334.1. Washington State Department of Transportation, Olympia, WA.

Rwebangira, T.R., Hicks, G., and Truebe, M. (1987) “Sensitivity Analysis of Selected Backcalculation Procedures.” Transportation Research Record 1117, p. 25–37. Transportation Research Board, Washington, DC.

Sargand, S.M., Hazen, G.A., Wilson, B.E., and Russ, A.C. (1991) Evaluation of Resilient Modulus by Back-Calculation Technique. Report No. FHWA/OH-91/005. Ohio Department of Transportation, Columbus, OH.

Schmalzer, P., Thompson, T., and Simpson, A. (2008) “Impact of Trends in Deflection with Repeated Load Application on Deflection Data Averaging.” Transportation Research Board 87th Annual Meeting. Preprint Paper No. 08-2499. Transportation Research Board, Washington,DC.

Schram, S. and Abdelrahman, M. (2006) “Improving Prediction Accuracy in Mechanistic-Empirical Pavement Design Guide.” Transportation Research Record 1947, p. 59–68. Transportation Research Board, Washington, DC.

Scullion, T. and Michalak, C. (1991) Modulus 4.0: User’s Manual. Publication No. FHWA/TX-91/1123-4. Texas State Department of Highways and Public Transportation, Austin, TX.

Scullion, T., Uzan, J., and Paredes, M. (1990) “Modulus: A Microcomputer-Based Backcalculation System.” Transportation Research Record 1260, p. 180–191. Transportation Research Board, Washington, DC.

Scullion, T., Briggs, R.C., and Lytton, R.L. (1989) “Using the Multidepth Deflectometer to Verify Modulus Backcalculation Procedures.” First International Symposium on Nondestructive Testing of Pavements and Backcalculation of Moduli. ASTM STP 1026. ASTM International, West Conshohocken, PA.

Sebaaly, B.E., Mamlouk, M.S., and Davies, T.G. (1986) “Dynamic Analysis of Falling Weight Deflectometer Data.” Transportation Research Record 1070, p. 63–68. Transportation Research Board, Washington, DC.

Sebaaly, P.E., Tabatabaee, N., and Scullion, T. (1992) “Comparison of Backcalculated Moduli from Falling Weight Deflectometer and Truck Loading.” Transportation Research Record 1377, p. 88–98. Transportation Research Board, Washington, DC.

Sebaaly, P.E., Schoener, P., Siddharthan, R., and Epps, J. (1994) “Implementation of Nevada’s Overlay Design Procedure.” Proceedings, 4th International Conference, Bearing Capacity of Roads and Airfields. St. Paul, MN.

Sebaaly, P.E., Bemanian, S., and Lani, S. (2000) “Nevada’s Approach to the Backcalculation Process.” Symposium on Nondestructive Testing of Pavements and Backcalculation of Moduli: Third Volume. ASTM STP 1375. ASTM International, West Conshohocken, PA.

Sessions, C.P., Baladi, G.Y., Dawson, T.A., and Haider, S.W. (2009) “Laboratory Subgrade Resilient Modulus Design Values for Michigan.” Transportation Research Board 88th Annual Meeting. Preprint Paper No. 09-1067. Transportation Research Board, Washington, DC.

Setiadji, B.H. and Fwa, T.F. (2007) “Consideration of Finite Slab Size in Backcalculation Analysis of Jointed Concrete Pavements.” Transportation Research Record 2005, p. 124–142. Transportation Research Board, Washington, DC.

Shoukry, S.N. (2000) “Backcalculation of Thermally Deformed Concrete Pavements.” Transportation Research Record 1716, p. 64–72. Transportation Research Board, Washington,DC.

Shoukry, S.N. and William, G.W. (1999) “Performance Evaluation of Backcalculation Algorithms Through Three-Dimensional Finite-Element Modeling of Pavement Structures.” Transportation Research Record 1655, p. 152–160. Transportation Research Board, Washington,DC.

Shoukry, S.N., Martinelli, D.R., and Selezneva, O.I. (1997) “Dynamic Performance of Composite Pavements Under Impact.” Transportation Research Record 1570, p. 163–171. Transportation Research Board, Washington, DC.

Shoukry, S.N., Riad, M.Y., and William, G.W. (2005) Effect of FWD Testing Position on Modulus of Subgrade Reaction. Report No. WVU-2002-04. West Virginia University, Morgantown, WV.

Siddharthan, R., Norris, G.M., and Epps, J.A. (1991) “Use of FWD Data for Pavement Material Characterization and Performance.” Journal of Transportation Engineering 117(6) p. 660–668. American Society of Civil Engineers, Reston, VA.

Siddharthan, R., Sebaaly, P.E., and Javaregowda, M. (1992) “Influence of Statistical Variation in Falling Weight Deflectometers on Pavement Analysis.” Transportation Research Record 1377, p. 57–66. Transportation Research Board, Washington, DC.

Sivaneswaran, N., Kramer, S.L., and Mahoney, J.P. (1991) “Advanced Backcalculation using a Nonlinear Least Squares Optimization Technique.” Transportation Research Record 1293, p.93–102. Transportation Research Board, Washington, DC.

Snaith, M.S. and Evdorides, H.T. (1994) “A Systematic Knowledge-Based Approach to the Structural Analysis of Pavements.” Proceedings, 4th International Conference on Bearing Capacity of Roads and Airfields. Minnesota Department of Transportation, St. Paul, MN.

Stolle, D.F.E. (1996) “Comparison of Simplified Elastostatic and Elastodynamic Models for Falling Weight Deflectometer Data Interpretation.” Transportation Research Record 1540, p.72–76. Transportation Research Board, Washington, DC.

Stolle, D.F.E. and Hein, D.K. (2002) “Assessment of the Impact of Layer Moduli on Measured Surface Deflections.” Proceedings of the Pavement Evaluation 2002 Conference. Roanoke, VA.

Strategic Highway Research Program. (1993) Layer Moduli Backcalculation Procedure: Software Selection. SHRP-P-651. Transportation Research Board, Washington, DC.

Strategic Highway Research Program. (1993) SHRP’s Layer Moduli Backcalculation Procedure. SHRP-P-655. Transportation Research Board, Washington, DC.

Stubstad, R.N., Jiang, Y.J., and Lukanen, E.O. (2006) Guidelines for Review and Evaluation of Backcalculation Results. Report No. FHWA-RD-05-152. Federal Highway Administration, Washington, DC.

Stubstad, R.N., Jiang, Y.J., Clevenson, M.L., and Lukanen, E.O. (2006) Review of the Long-Term Pavement Performance Backcalculation Results―Final Report. Report No. FHWA-HRT-05-150. Federal Highway Administration, Washington, DC.

Svec, O.J. and Yue, Z. (1994) “Use of Non-Circular Loading Plates for Better Backcalculation of Pavement Moduli.” Proceedings, 4th International Conference on Bearing Capacity of Roads and Airfields. St. Paul, MN.

Tam, W.S. and Brown, S.F. (1989) “Back-Analyzed Elastic Stiffnesses: Comparison Between Different Evaluation Procedures.” First International Symposium on Nondestructive Testing of Pavements and Backcalculation of Moduli. ASTM STP 1026. ASTM International, West Conshohocken, PA.

Tholen, O., Sharma, J., and Terrel, R.L. (1985) “Comparison of Falling Weight Deflectometer with Other Deflection Testing Devices.” Transportation Research Record 1007, p. 20–26. Transportation Research Board, Washington, DC.

Thompson, M.R. (1989) “ILLI-Pave Based NDT Analysis Procedures.” First International Symposium on Nondestructive Testing of Pavements and Backcalculation of Moduli. ASTM STP 1026. ASTM International, West Conshohocken, PA.

Thompson, M.R. (1992) “Report of the Discussion Group on Backcalculation Limitations and Future Improvements.” Transportation Research Record 1377, p. 3–4. Transportation Research Board, Washington, DC.

Timm, D., Birgisson, B., and Newcomb, D. (1998) “Development of Mechanistic-Empirical Pavement Design in Minnesota.” Transportation Research Record 1629, p. 181–188. Transportation Research Board, Washington, DC.

Timm, D.H., Priest, A.L., and McEwen, T.V. (2004) Design and Instrumentation of the Structural Pavement Experiment at the NCAT Test Track. NCAT Report 04-01. National Center for Asphalt Technology, Auburn, AL.

Titus-Glover, L. and Stanley, M. (2008) “Characterizing Existing Jointed Plain Concrete Pavement Portland Cement Concrete Elastic Modulus for Rehabilitation Design.” Transportation Research Board 87th Annual Meeting. Preprint Paper No. 08-3112. Transportation Research Board, Washington, DC.

Titus-Glover, L. and Stanley, M. (2008) “Rehabilitation Design of Jointed Plain Concrete Pavement: Characterizing the Existing Portland Cement Concrete Elastic Modulus.” Transportation Research Record 2084, p. 134–138. Transportation Research Board, Washington,DC.

Touma, B.E., Crovetti, J.A., and Shahin, M.Y. (1991) “Effect of Various Load Distributions on Backcalculated Moduli Values in Flexible Pavements.” Transportation Research Record 1293, p. 31–41. Transportation Research Board, Washington, DC.

Tran, N.H. and Hall, K.D. (2006) “Evaluation of Testing Protocols for Dynamic Modulus of Hot-Mix Asphalt.” Transportation Research Board 85th Annual Meeting. Preprint Paper No. 06‑1511. Transportation Research Board, Washington, DC.

Turkiyyah, G. (2005) Feasibility of Backcalculation Procedures Based on Dynamic FWD Response Data. Report No. WA-RD 586.1. Washington State Department of Transportation, Olympia, WA.

Uddin, W. (2001) “Development and Implementation of New Modulus Backcalculation Programs Using the PEDD Methodology.” Second International Symposium on Maintenance and Rehabilitation of Pavements and Technological Control. Auburn University, Auburn, AL.

Uddin, W., Chen, X., Yiqin, L., and Garza, S. (2004) “3D-FE Simulations and Validation of FWD Modulus Values Backcalculated for Asphalt Highways and Subgrade Sections.” Second International Symposium on Maintenance and Rehabilitation of Pavements and Technological Control. Auburn University, Auburn, AL.

Uddin, W. and Garza, S. (2004) “3D-FE Modeling and Simulation of Airfield Pavements Subjected to FWD Impact Load Pulse and Wheel Loads.” Airfield Pavements: Challenges and New Technologies. American Society of Civil Engineers, Reston, VA.

Uddin, W., Garza, S., and Boriboonsomsin, K. (2003) “A 3D-FE Simulation Study of the Effects of Nonlinear Material Properties on Pavement Structural Response Analysis and Design.” Maintenance and Rehabilitation of Pavements and Technological Control. University of Minho, Guimaraes, Portugal.

Uddin, W. and Godiwalla, A. (1998) “Finite Element Simulation of Nondestructive Testing for Pavement Structural Evaluation.” Airport Facilities: Innovations for the Next Century. Proceedings of the 25th International Air Transportation Conference. American Society of Civil Engineers, Reston, VA.

Uddin, W., Hackett, R.M., Joseph, A., Pan, Z., and Crawley, A.B. (1995) “Three-Dimensional Finite-Element Analysis of Jointed Concrete Pavement with Discontinuities.” Transportation Research Record 1482, p. 26–32. Transportation Research Board, Washington, DC.

Uddin, W., Hackett, R.M., Noppakunwijai, P., and Pan, Z. (1996) “Three-Dimensional Finite-Element Simulation of FWD Loading on Pavement Systems.” Meeting the Challenge: Rebuilding Inner City Airports. 24th International Air Transportation Conference. American Society of Civil Engineers, New York, NY.

Uddin, W. and McCullough, B.F. (1989) “In Situ Material Properties from Dynamic Deflection Equipment.” First International Symposium on Nondestructive Testing of Pavements and Backcalculation of Moduli. ASTM STP 1026. ASTM International, West Conshohocken, PA.

Uddin, W., Meyer. A.H., Hudson, W.R., and Stokoe, K.H. (1985) A Structural Evaluation Methodology for Pavements Based on Dynamic Deflections. Report No. FHWA/TX-86/17+387‑1. Texas State Department of Highways & Public Transportation, Austin, TX.

Uddin, W., Meyer. A.H., Hudson, W.R., and Stokoe, K.H. (1985) “Project-Level Structural Evaluation of Pavements Based on Dynamic Deflections.” Transportation Research Record 1007, p. 37–45. Transportation Research Board, Washington, DC.

Uddin, W., Meyer. A.H., Hudson, W.R., and Stokoe, K.H. (1985) “A Rigid Pavement Structural Evaluation System Based on Dynamic Deflections.” Proceedings, Third International Conference on Concrete Pavement Design and Rehabilitation. Purdue University, West Lafayette, IN.

Uddin, W., Pan, Z., Noppakunwijai, P., Plaxico, C.A., and Hackett, R.M. (1997) “Finite-Element Dynamic Analysis of Distressed Asphalt Pavements.” Proceedings, Eighth International Conference on Asphalt Pavements. University of Washington, Seattle, WA.

Uddin, W., Zhang, D., and Fernandez, F. (1994) “Finite Element Simulation of Pavement Discontinuities and Dynamic Load Response.” Transportation Research Record 1448,
p. 100–106. Transportation Research Board, Washington, DC.

Uhlmeyer, J.S., Mahoney, J.P., Hanek, G., Wang, G., Copstead, R.L., and Janssen, D.J. (1996) Estimation of Seasonal Effects for Pavement Design and Performance: Volume 1. Report No. FHWA-FLP-95-006. U.S. Forest Service and Federal Highway Administration, Washington,DC.

Uhlmeyer, J.S., Mahoney, J.P., Hanek, G., Wang, G., Copstead, R.L., and Janssen, D.L. (1996) Estimation of Seasonal Effects for Pavement Design and Performance: Volume 2. Report No. FHWA-FLP-95-007. U.S. Forest Service and Federal Highway Administration, Washington,DC.

Ullidtz, P., Battiato, G., Larsen, B.K., and Stubstad, R.N. (1987) “Verification of the Analytical-Empirical Method of Pavement Evaluation Based on FWD Testing.” Proceedings, Sixth International Conference on Structural Design of Asphalt Pavements, Volume I. University of Michigan, Ann Arbor, MI.

Ullidtz, P. and Coetzee, N.F. (1995) “Analytical Procedures in Nondestructive Testing Pavement Evaluation.” Transportation Research Record 1482, p. 61–66. Transportation Research Board, Washington, DC.

Uzan, J., Briggs, R.C., and Scullion, T. (1992) “Backcalculation of Design Parameters for Rigid Pavements.” Transportation Research Record 1377, p. 107–114. Transportation Research Board, Washington, DC.

Uzan, J. and Lytton, R.L. (1989) “Experiment Design Approach to Nondestructive Testing of Pavements.” Journal of Transportation Engineering 115(5), p. 505–520. American Society of Civil Engineers, Reston, VA.

Van Deusen, D. (1996) Selection of Flexible Backcalculation Software for the Minnesota Road Research Project. Report No. MN-PR-96-29. Minnesota Department of Transportation, Maplewood, MN.

Wang, F. and Lytton, R.L. (1993) “System Identification Method for Backcalculating Pavement Layer Properties.” Transportation Research Record 1384, p. 1–7. Transportation Research Board, Washington, DC.

Wang, M.C., Schauz, W., Amend, J., and Greene, J.L. (1989) “USAF Wave Propagation NDT Method.” First International Symposium on Nondestructive Testing of Pavements and Backcalculation of Moduli. ASTM STP 1026. ASTM International, West Conshohocken, PA.

Wang, W., Basheer, I., and Petros, K. (2006) “Jointed Plain Concrete Pavement Models Evaluation.” Transportation Research Board 85th Annual Meeting. Preprint Paper No. 06-2178. Transportation Research Board, Washington, DC.

Werkmeister, S. and Alabaster, D. (2007) “Estimation of Remaining Pavement Life of Low-Volume Roads with Falling Weight Deflectometer Results: A Practical Method.” Transportation Research Record 1989, p. 261–269. Transportation Research Board, Washington, DC.

Westover, T.M. and Guzina, B.B. (2007) “Engineering Framework for Self-Consistent Analysis of Falling Weight Deflectometer Data.” Transportation Research Record 2005, p. 55–63. Transportation Research Board, Washington, DC.

Westover, T.M., Labuz, J.F., and Guzina, B.B. (2007) Resilient Modulus Development of Aggregate Base and Subbase Containing Recycled Bituminous and Concrete for 2002 Design Guide and Mn/Pave Pavement Design. Report No. MN/RC-2007-25. University of Minnesota and Minnesota Department of Transportation, Maplewood, MN.

William, G.W. and Shoukry, S.N. (2000) Mechanistic Evaluation of the Depth to Bedrock and Its Effect on the Response of 3D Finite Element Pavement Models. GSP No. 98. American Society of Civil Engineers, Reston, VA.

Xu, B., Ranjithan, S.R., and Kim, Y.R. (2003) “Using the Asphalt Pavement Layer Condition Assessment Program: Case Studies.” Transportation Research Record 1860, p. 66–75. Transportation Research Board, Washington, DC.

Xu, B., Ranjithan, S.R., and Kim, Y.R. (2002) “New Relationships Between Falling Weight Deflectometer Deflections and Asphalt Pavement Layer Condition Indicators.” Transportation Research Record 1806, p. 48–56. Transportation Research Board, Washington, DC.

Zaghloul, S. and Elfino, M. (2000) “Pavement Rehabilitation Selection Based on Mechanistic Analysis and Field Diagnosis of Falling Weight Deflectometer Data: Virginia Experience.” Transportation Research Record 1730, p. 177–186. Transportation Research Board, Washington,DC.

Zaghloul, S., El Halim, A.A., Ayed, A., Vitillo, N.P., and Sauber, R.W. (2006) “Sensitivity Analysis of Input Traffic Levels on Mechanistic-Empirical Design Guide Predictions.” Transportation Research Board 85th Annual Meeting. Preprint Paper No. 06-0937. Transportation Research Board, Washington, DC.

Zaghloul, S, Ayed, A., El Halim, A.A., Vitillo, N.P., and Sauber, R.W. (2006) “Investigation of Environmental and Traffic Impacts on Mechanistic-Empirical Pavement Design Guide Predictions.” Transportation Research Board 85th Annual Meeting. Preprint Paper No. 06-0946. Transportation Research Board, Washington, DC.

Zaghloul, S., Helali, K., Ahmed, R., Ahmed, Z., and Jumikis, A.A. (2005) “Implementation of Reliability-Based Backcalculation Analysis.” Transportation Research Record 1905, p. 97–106. Transportation Research Board, Washington, DC.

Zaniewski, J.P. and Hossain, M. (1992) “Effect of Thickness and Temperature Corrections on Prediction of Pavement Structural Capacity Using Falling Weight Deflectometer Data.” Transportation Research Record 1377, p. 193–199. Transportation Research Board, Washington,DC.

Zhang, W. and Ullidtz, P. (2002) “Back-Calculation of Pavement Layer Moduli and Forward-Calculation of Stresses and Strains.” Proceedings, Ninth International Conference on Asphalt Pavements. International Society for Asphalt Pavements, St. Paul, MN.

Zhang, Z., Stolarski, H.K., and Newcomb, D.E. (1994) Development and Simulation Software for Modelling Pavement Response at MN/Road. Report No. MN/RC-94/31. Minnesota Department of Transportation, St Paul, MN.

Zhou, H. (2000) “Comparison of Backcalculated and Laboratory Measured Moduli on AC and Granular Base Layer Materials.” Symposium on Nondestructive Testing of Pavements and Backcalculation of Moduli: Third Volume. ASTM STP 1375. ASTM International, West Conshohocken, PA.

Zhou, H., Rada, G.R., and Elkins, G.E. (1997) “Investigation of Backcalculated Moduli Using Deflections Obtained at Various Locations in a Pavement Structure.” Transportation Research Record 1570, p. 96–107. Transportation Research Board, Washington, DC.

Zhou, H., Hicks, R.G., and Bell, C.A. (1990) “BOUSDEF: A Backcalculation Program for Determining Moduli of a Pavement Structure.” Transportation Research Record 1260,
p. 166–179. Transportation Research Board, Washington, DC.

Zhou, H., Hicks, R.G., and Huddleston, I.J. (1989) “Evaluation of the 1986 AASHTO Overlay Design Method.” Transportation Research Record 1215, p. 299–316. Transportation Research Board, Washington, DC.