Skip to contentUnited States Department of Transportation - Federal Highway AdministrationSearch FHWAFeedback

Pavements

Mobile Concrete Library

Peer Review Papers:

  • "Concrete Pavement Temperature Prediction and Case Studies with the FHWA HIPERPAV Models", Early age concrete properties and performance, Cement and Concrete Composites

  • "Effect Of Cement and Added NaOH on Measured Expansions In ASTM C 1260 Tests", Proceedings of the 11th International Conference on Alkali-Aggregate Reaction, Quebec City, Canada, pp. 483-492

  • "A 'Fresh' Perspective on Measuring Air in Concrete", Proceedings of the 2003 PCI/FHWA 3rd International Symposium on High Performance Concrete, October 19-22, 2003, Orlando, Florida

  • "Fresh Concrete Air Void Analyzer: A Technical Background Paper", A paper written as part of requirements for the AASHTO Technical Implementation Group.

  • "Optimizing High-Performance Concrete Mixtures Using Statistical Response Surface Methods", Proceedings of the 5th International Symposium on Utilization of High Strength/High Performance Concrete, Sandefjord, Norway, pp. 1311-1321.

  • "Measurement of the Tensile Bond Strength of a High Performance Concrete Deck Overlay," Proceedings of the PCI/FHWA/FIB International Symposium on High Performance Concrete, September 25-27, 2000, Orlando, Florida, USA, pp. 449-458.

  • "Use Of Nondestructive Testing For Concrete Pavements", Proceedings of the 7th International Conference on Concrete Pavements, September 9-13, 2001, Orlando Florida

  • "Use Of Nondestructive Testing For Transportation Structures - Case Histories" Proceedings of the 5th CANMET/ACI International Conference on Recent Advances in Concrete Technology, July 29-August 1, 2001, Singapore

  • "Using Maturity Concepts to Determine Strengths of Rapid Setting Hydraulic Cement Concrete", Proceedings of the 7th International Conference on Concrete Pavements, September 9-13, 2001, Orlando Florida

Journal Articles:

Presentations:

FHWA Sponsored Workshops

  • Concrete Mixture Design Workshop (Full-Day), 4th Annual Pennsylvania Concrete Seminar, January 23, 2003, Grantville, PA

  • NDT Workshop (Full-Day), Ontario Ministry Of Transportation Concrete Fall Meeting, October 17, 2002, Toronto, Ontario, Canada

  • HIPERPAV Workshops (4, Full-Day), Caltrans training, April 2, 3 and 5, 2002, Richmond, Marysville and Fresno, California

  • HIPERPAV Workshop (Full-Day), Nevada DOT, March 13, 2002, Carson City, Nevada

  • HIPERPAV Workshops, Caltrans/FHWA Hiperpav workshops, February 20-24, 2001, Sacramento, California

Nondestructive and in-place testing

  • In Place Methods to Assess Quality of Hardened Concrete, George Mason University Undergraduate Laboratory Experimental Program, Turner-Fairbank Highway Research Center, April 15, 2005, McLean, Virginia

  • Nondestructive Testing Technologies, NHI Materials Course, Concrete Module, March 17, 2005, Reno, Nevada

  • Innovative Testing Technologies, Concrete Pavement Seminar, March 2, 2005, Milwaukee, Wisconsin

  • Maturity Testing... Where Are We and Where Are We Going?, TRB 2005 Annual Meeting, January 12, 2005, Washington, DC

  • Advanced Testing Technologies Available through FHWA's Mobile Concrete Laboratory, NYSDOT ACPA-NE Chapter Concrete Pavement Conference, November 17th, 2004, Hauppauge, New York

  • Maturity Method for Strength Development, 2004 Nevada Infrastructure Concrete Conference, November 10, 2004, Reno, Nevada

  • Maturity Method for Strength Development, 2004 Nevada Infrastructure Concrete Conference, November 8, 2004, Las Vegas, Nevada

  • Nondestructive Testing Methods, NHI Materials Course, Concrete Module, March 3, 2004, Reno, Nevada

  • Innovative Testing Techniques, North Carolina DOT Construction Engineers Conference, February 18, 2004, Raleigh, North Carolina

  • Nondestructive Testing, NHI Materials Course, Concrete Module, March 18, 2003, Reno, NV

  • Case Studies on the Use of the Maturity Concept, 4th Annual Pennsylvania Concrete Seminar, January 22, 2003, Grantville, PA

  • Maturity Testing of Concrete Pavements, 1st Annual NYSDOT/ACPA-NE Concrete Pavement Conference, November 7,2002, Albany, NY

  • Practical Uses of Maturity by State Highway Agencies, Concrete Maturity Workshop, Oregon DOT Training Center, August 27, 2002, Salem, Oregon

  • Maturity Testing and Air Void Analysis Testing, US Army Corps of Engineers' Waterways Experiment Station, November 2, 2001, Vicksburg, Mississippi

  • Innovative Concrete Testing for the Transportation Industry, ACI Fall 2001 Convention, October 28, 2001, Dallas, Texas

  • Use of Nondestructive Testing for Transportation Structures - Case Histories, 5th CANMET/ACI International Conference on Recent Advances in Concrete Technology, August 1, 2001, Singapore

  • Measurement of the Tensile Bond Strength of a High Performance Concrete Deck Overlay,PCI/FHWA/FIB International Symposium on High Performance Concrete, September 27, 2000, Orlando, Florida

  • In-Situ Method for Measuring Tensile Bond Strength of Concrete Overlays and Whitetoppings, TRB Committee A2E03 Technical Session, Transportation Research Board, January 11, 2000, Washington DC

  • Using the Maturity Method for Determination of Opening Strengths, CalTrans /ACPA /FHWA Reconstruction of Urban Freeways Seminar, December 7, 1999, Sacramento, California

  • In-Situ Method for Measuring Tensile Bond Strength of Concrete Overlays and Whitetoppings, Open Paper Session, ACI Fall 1999, Baltimore, Maryland

  • A Test Application of the Maturity Method and HIPERPAV for the I-10 Pavement Replacement Project, Pomona California, Project Closeout Presentation for CalTrans Engineers, August 1999, Los Angeles, California

High Performance Concrete

  • HPC Overview, High Performance Concrete Seminar, March 21, 2003, Reno, NV

Durability

  • Air Void Analyzer, 2004 Nevada Infrastructure Concrete Conference, November 10, 2004, Reno, Nevada

  • Air Void Analyzer, 2004 Nevada Infrastructure Concrete Conference, November 8, 2004, Las Vegas, Nevada

  • "Air-oneous" Assumptions about Air, ACI Fall Convention, October 24, 2004, San Francisco, California

  • How does the Air Void Analyzer work? TN DOT Air Void Analyzer workshop, June 22, 2004, Nashville, Tennessee

  • Importance of Air in Concrete (½-Day Workshop), Del DOT Concrete Construction Workshop, April 15, 2004, Dover, Delaware

  • Air Void Analyzer and Coefficient of Thermal Expansion Tests, Pennsylvania Smart Pavement Partners Meeting, February 25, 2004, Pittsburgh, Pennsylvania

  • "Air-oneous" Assumptions about Air, 2003 ACPA Annual Convention, December 5, 2003, Scottsdale, Arizona

  • Air Void Analyzer, Portland Cement Concrete Overlays: State of The Art Workshop, June 26, 2003, Frankfort, Kentucky

  • PCC On-Site Test Methods, RPI Concrete Technical Conference, March 12, 2003, Troy NY

  • Concrete Results, Southeast Concrete Alliance Network (SCAN) 2003, February 25, 2003, Raleigh, NC

  • Evaluation Of Different GGBFS Addition Rates On Tennessee Slip-Form Paving, Project closeout meeting, TDOT/Tennessee Ready-Mixed Concrete Association, January 23, 2002, Nashville, Tennessee

  • Testing for Quality, Georgia Quality Initiative, December 6, 2001, Athens, Georgia

  • Characterizing the Durability of Concrete for Highway Structures, Seminar at Howard University, November 7, 2000, Washington DC

Concrete Pavement and Mixture Design

  • M-E Design Guide PCC Laboratory Requirements, Introduction to M-E Design Guide Materials Inputs Workshop, MODOT State Materials Lab Facility, April 20-21, 2005, Jefferson City, Missouri

  • M-E Design Guide PCC Laboratory Requirements, Introduction to M-E Design Guide Materials Inputs Workshop, VDOT Training Center, April 5-6, 2005, Thornburg, Virginia

  • M-E Design Guide PCC Laboratory Requirements, Introduction to M-E Design Guide Materials Inputs Workshop, CT DOT Research Facility, March 30-31, 2005, Rocky Hill, Connecticut

  • Concrete Data Input for the M-E Design Guide; Software Module, Introduction to M-E Design Guide Materials Inputs Workshop, February 16, 2005, Salt Lake City, Utah

  • M-E Design Guide PCC Laboratory Requirements, M-E Design Guide Materials Inputs for Design Video, February 2, 2005, McLean, Virginia

  • M-E Design Guide PCC Laboratory Requirements, M-E Design Guide Materials Inputs for Design Pilot Workshop, Turner Fairbank Highway Research Center, January 28, 2005, McLean, Virginia

  • PCC Mixture Design Workshop (Full-Day), Del DOT Training, March 26, 2004, Dover, Delaware

  • Workability Measurement Devices, Spring 2003 Midwest Concrete Consortium, April 10, 2003, Rosemont, IL

Construction

  • Use of HIPERPAV: A Case History, 2005 Missouri Concrete Conference, Havener Center, April 12, 2005, Rolla, Missouri

  • HIPERPAV II, A Systems Approach to High Performance Concrete Paving, Del DOT Concrete Construction Workshop, April 15, 2004, Dover, Delaware

  • Bonded Concrete Overlays and the Importance of Curing, 83rd TRB Meeting, Session 611, January 14, 2004, Washington, DC

  • Bonded Concrete Overlays, ACI 325 Committee Meeting, ACI Fall 2003 Convention, September 30, 2003, Boston, Massachusetts

  • Precast Pavement Replacement at Dulles International Airport, Office of Pavement Technology monthly staff meeting, October 11, 2001, Washington DC
  • HIPERPAV Workshop, ACPA Second Annual Concrete Seminar & Workshop for the Transportation Industry, January 18, 2001, Grantville, Pennsylvania

  • HIPERPAV: Background, Framework and Demo, Asphalt/PCC Materials and Testing Workshop for FHWA Engineers, December 12, 2000, Turner Fairbank Highway Research Center, McLean, Virginia

  • HIPERPAV for HPC Pavements, New Jersey HPC Showcase, September 14, 2000, Rutgers University, New Jersey

  • HIPERPAV Software Review, New Jersey HPC Workshop, September 14, 2000, Rutgers University, New Jersey

  • HIPERPAV Framework, FHWA Pavement Technology Delivery Workshop, March 30, 2000, FHWA Midwestern Resource Center, Olympia Fields, Illinois

Mobile Concrete Lab Activities

  • FHWA's Mobile Concrete Laboratory, 2005 Missouri Concrete Conference, Havener Center, April 13, 2005, Rolla, Missouri

  • FHWA's Technology Transfer Vehicle, Virginia Concrete Conference, March 10-11, 2005, Richmond, Virginia

  • Experiences with FHWA's Mobile Concrete Laboratory, Georgia PCCP Conference, October 19, 2004, Macon, Georgia

  • Overview of Experiences with FHWA's Mobile Concrete Laboratory, ACI National Capital Chapter/Maryland Chapter Joint Meeting, April 20, 2004, Silver Spring, Maryland

  • FHWA's Mobile Concrete Laboratory, US Corps of Engineers Transportation Systems Workshop, March 31, 2004, Fort Lauderdale, Florida

  • Mobile Concrete Laboratory, 24th Annual PCC Paving Conference, March 10, 2004, Kansas City, Missouri

  • Office of Pavement Technology, MCL, 40th Annual Iowa Concrete Pavement Workshop, February 5, 2004, Des Moines, Iowa

  • FHWA's Mobile Concrete Laboratory, 3rd Annual Concrete Pavement Workshop, January 29, 2004, Salt Lake City, Utah

  • Mobile Concrete Laboratory Program, AASHTO Subcommittee on Bridges and Structures Meeting, Technical Committees T-10 and T-4, May 20 and 21, 2002, Atlantic City, New Jersey

  • Federal Highway Administration's Mobile Concrete Laboratory, New Mexico SHTD Statewide Project Manager's Meeting, May 1, 2002, Socorro, New Mexico

  • FHWA - Mobile Concrete Laboratory, 77th Northeastern States Materials Engineers Association Meeting, October 16th, 2001, Albany, New York

  • FHWA's Mobile Concrete Laboratory, 7th International Conference on Concrete Pavements, September 9-13, 2001, Orlando, Florida

  • The Mobile Concrete Laboratory, ACPA Mo/Ks Annual Pavement Conference, March 6, 2001, Kansas City, Missouri

  • FHWA's Mobile Concrete Laboratory, 76th Annual Meeting of Northeastern States Materials Engineers' Association, October 24, 2000, Portland, Maine
 
PDF files can be viewed with the Acrobat® Reader®
Updated: 01/29/2014
 

FHWA
United States Department of Transportation - Federal Highway Administration