Skip to contentUnited States Department of Transportation - Federal Highway AdministrationSearch FHWAFeedback

Pavements

<< Previous ContentsNext >>

Development and Implementation of a Performance-Related Specification for I-65 Tennessee: Final Report

APPENDIX B: Summary of All Data in Computational Spreadsheet Format

Table B-1. Northbound Lot 1 PRS Computation Results.

LOT INFORMATION:

Lot Number: 1 (1-3)
Bid Price, $/sq yd: 31.95
Lot Length, feet: 1770 Check Stations
Lot Width, feet: 24
Resulting Lot Area, sq yds: 4720.00
Project No.: --
Begin Station: 600+00
End Station: 617+70
Lane No’s.: 4 & 5
Paving Date (s): --

THICKNESS:

Thickness Core 1, in: Sublot 1, 13.6; Sublot 2, 13.3; Sublot 3, 13.4 [no data shown for sublots 4-9)
Thickness IE 1 (avg of 3), in: [no data shown for sublots 1-9]
Sublot Thickness, in.: Sublot 1, 13.6; Sublot 2, 13.3; Sublot 3, 13.4 [no data shown for sublots 4-9)
Information must be provided for at least 3 full sublots
Lot ACQ, in: 13.0
Lot RQL, in: 12.0
Lot MQL, in: 14.0
Resulting Samples per lot (n): 3
Lot Thickness Mean, in: 13.4
Lot Thickness Mean Acceptable? Yes
Notes on Lot Thickness Mean: Lot mean thickness is between RQL and MQL.
Notes on Sublot Thickness Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 0.8862
Lot Thickness Std. Dev., in: 0.17237
Resulting Pay Factor: 101.63%

STRENGTH:

Strength cylinder 1, psi: Sublot 1, 5,182; Sublot 2, 4,290; Sublot 3, 5,605 [no data shown for sublots 4-9)
Strength cylinder 2, psi: Sublot 1, 5,605; Sublot 2, 5,195; Sublot 3, 5,183 [no data shown for sublots 4-9)
Sublot Strength, psi: Sublot 1, 5393.5; Sublot 2, 4742.5; Sublot 3: 5394 [no data shown for sublots 4-9)
Information must be provided for at least 3 full sublots
Lot AQL, psi: 4500
Lot RQL, psi: 3000
Lot MQL, psi: 5500
Resulting Samples per lot (n): 3
Replicates per lot (m): 2.0
Lot Strength Mean, psi: 5176.7
Lot Strength Mean Acceptable? Yes
Notes on Lot Strength Mean: Lot mean strength is between RQL and MQL.
Notes on Sublot Strength Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 08862
Lot Strength Std. Dev., psi: 300.01
Resulting Pay Factor: 103.25%

SMOOTHNESS:

PI for Pass 1, in/mi: Sublot 1, 4.12; Sublot 2, 2.32; Sublot 3, 7.66 [no data shown for sublots 4-9)
PI for Pass 2, in/mi: Sublot 1, 8.45; Sublot 2, 6.44; Sublot 3, 4.21 [no data shown for sublots 4-9)
PI for Pass 3, in/mi: Sublot 1, 4.86; Sublot 2, 5.17; Sublot 3, 4.23 [no data shown for sublots 4-9)
PI for Pass 4, in/mi: Sublot 1, 6.86; Sublot 2, 3.59; Sublot 3, 5.20 [no data shown for sublots 4-9)
Sublot Mean PI, in/mi: Sublot 1, 6.07; Sublot 2, 4.38; Sublot 3, 5.20 [no data shown for sublots 4-9)
Information must be provided for at least 3 full sublots
Lot AQL, in/mi: 7.0
Lot RQL, in/mi: 9.0
Lot MQL, in/mi: 0.0
Resulting Samples per lot (n): 3
Replicates per lot (m): 4.0
Lot PI Mean, [in/mi]: 5.5
Lot PI Mean Acceptable? Yes
Notes on Lot Smoothness Mean: Lot smoothness is between RQL and MQL.

Table B-2. Northbound Lot 2 PRS Computation Results.

LOT INFORMATION:

Lot Number: 2 (4-7)
Bid Price, $/sq yd: 31.95
Lot Length, feet: 2000 Check Stations
Lot Width, feet: 24
Resulting Lot Area, sq yds: 5333.33
Project No.: --
Begin Station: 580+00
End Station: 600+00
Lane No’s.: 4 & 5
Paving Date (s): --

THICKNESS:

Thickness Core 1, in: Sublot 1, 13.4; Sublot 2, 13.3; Sublot 3, 13.3, Sublot 4, 13.3 [no data shown for sublots 5-9]
Thickness IE 1 (avg of 3), in: --
Sublot Thickness, in.: Sublot 1, 13.4; Sublot 2, 13.3; Sublot 3, 13.3; Sublot 4, 13.3 [no data shown for sublots 5-9]
Information must be provided for at least 3 full sublots
Lot ACQ, in: 13.0
Lot RQL, in: 12.0
Lot MQL, in: 14.0
Resulting Samples per lot (n): 4
Lot Thickness Mean, in: 13.3
Lot Thickness Mean Acceptable? Yes
Notes on Lot Thickness Mean: Lot mean thickness is between RQL and MQL.
Notes on Sublot Thickness Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 0.9213
Lot Thickness Std. Dev., in: 0.05427
Resulting Pay Factor: 101.44%

STRENGTH:

Strength cylinder 1, psi: Sublot 1, 5,380; Sublot 2, 4,740; Sublot 3, 4,740; Sublot 4, 5,502 [no data shown for sublots 5-9]
Strength cylinder 2, psi: Sublot 1, 6,000; Sublot 2, 5,713; Sublot 3, 5,425; Sublot 4, 5,425 [no data shown for sublots 5-9]
Sublot Strength, psi: Sublot 1, 5690; Sublot 2, 5226.5; Sublot 3, 5082.5; Sublot 4, 5463.5 [no data shown for sublots 5-9]
Information must be provided for at least 3 full sublots
Lot AQL, psi: 4500
Lot RQL, psi: 3000
Lot MQL, psi: 5500
Resulting Samples per lot (n): 4
Replicates per lot (m): 2.0
Lot Strength Mean, psi: 5365.6
Lot Strength Mean Acceptable? Yes
Notes on Lot Strength Mean: Lot mean strength is between RQL and MQL.
Notes on Sublot Strength Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 0.9213
Lot Strength Std. Dev., psi: 205.14
Resulting Pay Factor: 104.10%

SMOOTHNESS:

PI for Pass 1, in/mi: Sublot 1, 2.75; Sublot 2, 2.01; Sublot 3, 2.96; Sublot 4, 2.64 [no data shown for sublots 5-9]
PI for Pass 2, in/mi: Sublot 1, 7.92; Sublot 2, 3.38; Sublot 3, 2.01; Sublot 4, 4.22 [no data shown for sublots 5-9]
PI for Pass 3, in/mi: Sublot 1, 6.76; Sublot 2, 5.7; Sublot 3, 1.16; Sublot 4, 5.49 [no data shown for sublots 5-9]
PI for Pass 4, in/mi: Sublot 1, 6.65; Sublot 2, 7.92; Sublot 3, 1.48; Sublot 4, 3.38 [no data shown for sublots 5-9]
Sublot Mean PI, in/mi: Sublot 1, 6.02; Sublot 2, 4.75; Sublot 3, 1.90; Sublot 4, 3.93 [no data shown for sublots 5-9]
Information must be provided for at least 3 full sublots
Lot AQL, in/mi: 7.0
Lot RQL, in/mi: 9.0
Lot MQL, in/mi: 0.0
Resulting Samples per lot (n): 4
Replicates per lot (m): 4.0
Lot PI Mean, in/mi: 3.5
Lot PI Mean Acceptable? Yes
Notes on Lot Smoothness Mean: Lot mean smoothness is between RQL and MQL.

Table B-3. Northbound Lot 3 PRS Computation Results.

LOT INFORMATION:

Lot Number: 3 (8-11)
Bid Price, $/sq yd: 31.95
Lot Length, feet: 2000
Lot Width, feet: 24
Resulting Lot Area, sq yds: 5333.33
Project No.: --
Begin Station: 560+00
End Station: 580+00
Lane No’s.: 4 & 5
Paving Date (s): --

THICKNESS:

Thickness Core 1, in: Sublot 1, 13.6; Sublot 2, 13.6; Sublot 3, 13.6, Sublot 4, 13.6 [no data shown for sublots 5-9]
Thickness IE 1 (avg of 3), in: --
Sublot Thickness, in.: Sublot 1, 13.6; Sublot 2, 13.6; Sublot 3, 13.6; Sublot 4, 13.6 [no data shown for sublots 5-9]
Information must be provided for at least 3 full sublots
Lot ACQ, in: 13.0
Lot RQL, in: 12.0
Lot MQL, in: 14.0
Resulting Samples per lot (n): 4
Lot Thickness Mean, in: 13.6
Lot Thickness Mean Acceptable? Yes
Notes on Lot Thickness Mean: Lot mean thickness is between RQL and MQL.
Notes on Sublot Thickness Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 0.9213
Lot Thickness Std. Dev., in: 0.00000
Resulting Pay Factor: 101.96%

STRENGTH:

Strength cylinder 1, psi: Sublot 1, 5,380; Sublot 2, 5,190; Sublot 3, 5,190; Sublot 4, 5,295 [no data shown for sublots 5-9]
Strength cylinder 2, psi: Sublot 1, 5,155; Sublot 2, 5,270; Sublot 3, 5,710; Sublot 4, 5,380 [no data shown for sublots 5-9]
Sublot Strength, psi: Sublot 1, 5267.5; Sublot 2, 5230; Sublot 3, 5450; Sublot 4, 5337.5 [no data shown for sublots 5-9]
Information must be provided for at least 3 full sublots
Lot AQL, psi: 4500
Lot RQL, psi: 3000
Lot MQL, psi: 5500
Resulting Samples per lot (n): 4
Replicates per lot (m): 2.0
Lot Strength Mean, psi: 5321.3
Lot Strength Mean Acceptable? Yes
Notes on Lot Strength Mean: Lot mean strength is between RQL and MQL.
Notes on Sublot Strength Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 0.9213
Lot Strength Std. Dev., psi: 74.22
Resulting Pay Factor: 104.02%

SMOOTHNESS:

PI for Pass 1, in/mi: Sublot 1, 7.08; Sublot 2, 3.59; Sublot 3, 3.7; Sublot 4, 5.49 [no data shown for sublots 5-9]
PI for Pass 2, in/mi: Sublot 1, 6.23; Sublot 2, 5.28; Sublot 3, 4.75; Sublot 4, 3.48 [no data shown for sublots 5-9]
PI for Pass 3, in/mi: Sublot 1, 10.67; Sublot 2, 5.81; Sublot 3, 5.81; Sublot 4, 3.91 [no data shown for sublots 5-9]
PI for Pass 4, in/mi: Sublot 1, 7.39; Sublot 2, 3.27; Sublot 3, 7.39; Sublot 4, 2.75 [no data shown for sublots 5-9]
Sublot Mean PI, in/mi: Sublot 1, 7.84; Sublot 2, 4.49; Sublot 3, 5.41; Sublot 4, 3.91 [no data shown for sublots 5-9]
Information must be provided for at least 3 full sublots
Lot AQL, in/mi: 7.0
Lot RQL, in/mi: 9.0
Lot MQL, in/mi: 0.0
Resulting Samples per lot (n): 4
Replicates per lot (m): 4.0
Lot PI Mean, in/mi: 5.0
Lot PI Mean Acceptable? Yes
Notes on Lot Smoothness Mean: Lot mean smoothness is between RQL and MQL.

Table B-4. Northbound Lot 4 PRS Computation Results.

LOT INFORMATION:

Lot Number: 4 (12-15)
Bid Price, $/sq yd: 31.95
Lot Length, feet: 2370
Lot Width, feet: 24
Resulting Lot Area, sq yds: 6320.00
Project No.: --
Begin Station: 536+30
End Station: 560+00
Lane No’s.: 4 & 5
Paving Date (s): --

THICKNESS:

Thickness Core 1, in: Sublot 1, 13.4; Sublot 2, 13.2; Sublot 3, 13.3, Sublot 4, 13.3 [no data shown for sublots 5-9]
Thickness IE 1 (avg of 3), in: --
Sublot Thickness, in.: Sublot 1, 13.4; Sublot 2, 13.2; Sublot 3, 13.3; Sublot 4, 13.3 [no data shown for sublots 5-9]
Information must be provided for at least 3 full sublots
Lot ACQ, in: 13.0
Lot RQL, in: 12.0
Lot MQL, in: 14.0
Resulting Samples per lot (n): 4
Lot Thickness Mean, in: 13.6
Lot Thickness Mean Acceptable? Yes
Notes on Lot Thickness Mean: Lot mean thickness is between RQL and MQL.
Notes on Sublot Thickness Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 0.9213
Lot Thickness Std. Dev., in: 0.08862
Resulting Pay Factor: 101.37%

STRENGTH:

Strength cylinder 1, psi: Sublot 1, 4,515; Sublot 2, 5,075; Sublot 3, 4,955; Sublot 4, 5,173 [no data shown for sublots 5-9]
Strength cylinder 2, psi: Sublot 1, 5,015; Sublot 2, 4,260; Sublot 3, 5,135; Sublot 4, 4,955 [no data shown for sublots 5-9]
Sublot Strength, psi: Sublot 1, 4765; Sublot 2, 4667.5; Sublot 3, 5045; Sublot 4, 5064 [no data shown for sublots 5-9]
Information must be provided for at least 3 full sublots
Lot AQL, psi: 4500
Lot RQL, psi: 3000
Lot MQL, psi: 5500
Resulting Samples per lot (n): 4
Replicates per lot (m): 2.0
Lot Strength Mean, psi: 4885.4
Lot Strength Mean Acceptable? Yes
Notes on Lot Strength Mean: Lot mean strength is between RQL and MQL.
Notes on Sublot Strength Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 0.9213
Lot Strength Std. Dev., psi: 153.08
Resulting Pay Factor: 102.07%

SMOOTHNESS:

PI for Pass 1, in/mi: Sublot 1, 2.75; Sublot 2, 8.24; Sublot 3, 9.19; Sublot 4, 6.86 [no data shown for sublots 5-9]
PI for Pass 2, in/mi: Sublot 1, 9.4; Sublot 2, 17.53; Sublot 3, 9.19; Sublot 4, 8.13 [no data shown for sublots 5-9]
PI for Pass 3, in/mi: Sublot 1, 6.12; Sublot 2, 7.81; Sublot 3, 7.39; Sublot 4, 9.4 [no data shown for sublots 5-9]
PI for Pass 4, in/mi: Sublot 1, 4.12; Sublot 2, 4.65; Sublot 3, 7.18; Sublot 4, 8.34 [no data shown for sublots 5-9]
Sublot Mean PI, in/mi: Sublot 1, 5.60; Sublot 2, 9.56; Sublot 3, 8.24; Sublot 4, 8.18 [no data shown for sublots 5-9]
Information must be provided for at least 3 full sublots
Lot AQL, in/mi: 7.0
Lot RQL, in/mi: 9.0
Lot MQL, in/mi: 0.0
Resulting Samples per lot (n): 4
Replicates per lot (m): 4.0
Lot PI Mean, in/mi: 8.9
Lot PI Mean Acceptable? Yes
Notes on Lot Smoothness Mean: Lot mean smoothness is between RQL and MQL.

Table B-5. Northbound Lot 5 PRS Computation Results.

LOT INFORMATION:

Lot Number: 5 (16-18)
Bid Price, $/sq yd: 31.95
Lot Length, feet: 1870
Lot Width, feet: 24
Resulting Lot Area, sq yds: 4986.67
Project No.: --
Begin Station: 515+00
End Station: 533+70
Lane No’s.: 4 & 5
Paving Date (s): --

THICKNESS:

Thickness Core 1, in: Sublot 1, 12.5; Sublot 2, 13.4; Sublot 3, 13.4, [no data shown for sublots 4-9]
Thickness IE 1 (avg of 3), in: --
Sublot Thickness, in.: Sublot 1, 12.5; Sublot 2, 13.4; Sublot 3, 13.4 [no data shown for sublots 4-9]
Information must be provided for at least 3 full sublots
Lot ACQ, in: 13.0
Lot RQL, in: 12.0
Lot MQL, in: 14.0
Resulting Samples per lot (n): 3
Lot Thickness Mean, in: 13.1
Lot Thickness Mean Acceptable? Yes
Notes on Lot Thickness Mean: Lot mean thickness is between RQL and MQL.
Notes on Sublot Thickness Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 0.8862
Lot Thickness Std. Dev., in: 0.58634
Resulting Pay Factor: 100.31%

STRENGTH:

Strength cylinder 1, psi: Sublot 1, 5,725; Sublot 2, 4,820; Sublot 3, 5,100; [no data shown for sublots 4-9]
Strength cylinder 2, psi: Sublot 1, 5,565; Sublot 2, 5,725; Sublot 3, 4,820 [no data shown for sublots 4-9]
Sublot Strength, psi: Sublot 1, 5645; Sublot 2, 5275.5; Sublot 3, 4960 [no data shown for sublots 5-9]
Information must be provided for at least 3 full sublots
Lot AQL, psi: 4500
Lot RQL, psi: 3000
Lot MQL, psi: 5500
Resulting Samples per lot (n): 3
Replicates per lot (m): 2.0
Lot Strength Mean, psi: 5292.5
Lot Strength Mean Acceptable? Yes
Notes on Lot Strength Mean: Lot mean strength is between RQL and MQL.
Notes on Sublot Strength Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 0.8862
Lot Strength Std. Dev., psi: 273.63
Resulting Pay Factor: 103.76%

SMOOTHNESS:

PI for Pass 1, in/mi: Sublot 1, 3.59; Sublot 2, 4.65; Sublot 3, 4.98 [no data shown for sublots 4-9]
PI for Pass 2, in/mi: Sublot 1, 5.39; Sublot 2, 7.71; Sublot 3, 8.21 [no data shown for sublots 4-9]
PI for Pass 3, in/mi: Sublot 1, 6.02; Sublot 2, 4.96; Sublot 3, 8.86 [no data shown for sublots 4-9]
PI for Pass 4, in/mi: Sublot 1, 7.6; Sublot 2, 4.75; Sublot 3, 6.74 [no data shown for sublots 4-9]
Sublot Mean PI, in/mi: Sublot 1, 5.65; Sublot 2, 5.52; Sublot 3, 7.20 [no data shown for sublots 4-9]
Information must be provided for at least 3 full sublots
Lot AQL, in/mi: 7.0
Lot RQL, in/mi: 9.0
Lot MQL, in/mi: 0.0
Resulting Samples per lot (n): 3
Replicates per lot (m): 4.0
Lot PI Mean, in/mi: 5.8
Lot PI Mean Acceptable? Yes
Notes on Lot Smoothness Mean: Lot mean smoothness is between RQL and MQL.

Table B-6. Northbound Lot 6 PRS Computation Results.

LOT INFORMATION:

Lot Number: 6 (19-23)
Bid Price, $/sq yd: 31.95
Lot Length, feet: 2380
Lot Width, feet: 24
Resulting Lot Area, sq yds: 6346.67
Project No.: --
Begin Station: 489+20
End Station: 515+00
Lane No’s.: 4 & 5
Paving Date (s): --

THICKNESS:

Thickness Core 1, in: Sublot 1, 13.1; Sublot 2, 13.1; Sublot 3, 13.2, Sublot 4, 13.1, Sublot 5, 13.2 [no data shown for sublots 6-9]
Thickness IE 1 (avg of 3), in: --
Sublot Thickness, in.: Sublot 1, 13.1; Sublot 2, 13.1; Sublot 3, 13.2; Sublot 4, 13.1, Sublot 5, 13.2 [no data shown for sublots 6-9]
Information must be provided for at least 3 full sublots
Lot ACQ, in: 13.0
Lot RQL, in: 12.0
Lot MQL, in: 14.0
Resulting Samples per lot (n): 5
Lot Thickness Mean, in: 13.1
Lot Thickness Mean Acceptable? Yes
Notes on Lot Thickness Mean: Lot mean thickness is between RQL and MQL.
Notes on Sublot Thickness Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 0.9399
Lot Thickness Std. Dev., in: 0.05827
Resulting Pay Factor: 100.89%

STRENGTH:

Strength cylinder 1, psi: Sublot 1, 6,015; Sublot 2, 5,970; Sublot 3, 5,625; Sublot 4, 5,265; Sublot 5, 5,240 [no data shown for sublots 6-9]
Strength cylinder 2, psi: Sublot 1, 5,625; Sublot 2, 5,635; Sublot 3, 5,635; Sublot 4, 5,175; Sublot 5, 5025 [no data shown for sublots 6-9]
Sublot Strength, psi: Sublot 1, 5820; Sublot 2, 5802.5; Sublot 3, 5450; Sublot 4, 5220, Sublot 5, 5132.5 [no data shown for sublots 6-9]
Information must be provided for at least 3 full sublots
Lot AQL, psi: 4500
Lot RQL, psi: 3000
Lot MQL, psi: 5500
Resulting Samples per lot (n): 5
Replicates per lot (m): 2.0
Lot Strength Mean, psi: 5485.0
Lot Strength Mean Acceptable? Yes
Notes on Lot Strength Mean: Lot mean strength is between RQL and MQL.
Notes on Sublot Strength Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 0.9399
Lot Strength Std. Dev., psi: 240.49
Resulting Pay Factor: 104.57%

SMOOTHNESS:

PI for Pass 1, in/mi: Sublot 1, 3.38; Sublot 2, 6.55; Sublot 3, 3.48; Sublot 4, 3.17; Sublot 5, 4.22 [no data shown for sublots 6-9]
PI for Pass 2, in/mi: Sublot 1, 7.39; Sublot 2, 9.19; Sublot 3, 5.81; Sublot 4, 2.85; Sublot 5, 6.34 [no data shown for sublots 6-9]
PI for Pass 3, in/mi: Sublot 1, 7.39; Sublot 2, 5.7; Sublot 3, 7.08; Sublot 4, 2.96; Sublot 5, 5.28 [no data shown for sublots 6-9]
PI for Pass 4, in/mi: Sublot 1, 6.97; Sublot 2, 4.96; Sublot 3, 5.07; Sublot 4, 3.7; Sublot 5, 7.5 [no data shown for sublots 6-9]
Sublot Mean PI, in/mi: Sublot 1, 6.28; Sublot 2, 6.60; Sublot 3, 5.36; Sublot 4, 3.17; Sublot 5, 5.84 [no data shown for sublots 6-9]
Information must be provided for at least 3 full sublots
Lot AQL, in/mi: 7.0
Lot RQL, in/mi: 9.0
Lot MQL, in/mi: 0.0
Resulting Samples per lot (n): 5
Replicates per lot (m): 4.0
Lot PI Mean, in/mi: 5.2
Lot PI Mean Acceptable? Yes
Notes on Lot Smoothness Mean: Lot mean smoothness is between RQL and MQL.

Table B-7. Southbound Lot 7 PRS Computation Results.

LOT INFORMATION:

Lot Number: 7
Bid Price, $/sq yd: 31.95
Lot Length, feet: 1180
Lot Width, feet: 24
Resulting Lot Area, sq yds: 3146.67
Project No.: --
Begin Station: 475+67
End Station: 487+47
Lane No’s.: 4 & 5
Paving Date (s): --

THICKNESS:

Thickness Core 1, in: Sublot 1, 13.1; Sublot 2, 13; Sublot 3, 13, [no data shown for sublots 4-9]
Thickness IE 1 (avg of 3), in: --
Sublot Thickness, in.: Sublot 1, 13.1; Sublot 2, 13; Sublot 3, 13 [no data shown for sublots 4-9]
Information must be provided for at least 3 full sublots
Lot ACQ, in: 13.0
Lot RQL, in: 12.0
Lot MQL, in: 14.0
Resulting Samples per lot (n): 3
Lot Thickness Mean, in: 13.0
Lot Thickness Mean Acceptable? Yes
Notes on Lot Thickness Mean: Lot mean thickness is between RQL and MQL.
Notes on Sublot Thickness Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 0.8862
Lot Thickness Std. Dev., in: 0.06515
Resulting Pay Factor: 100.52%

STRENGTH:

Strength cylinder 1, psi: Sublot 1, 4,260; Sublot 2, 5,520; Sublot 3, 4,170; [no data shown for sublots 4-9]
Strength cylinder 2, psi: Sublot 1, 4,500; Sublot 2, 5,360; Sublot 3, 4,250 [no data shown for sublots 4-9]
Sublot Strength, psi: Sublot 1, 4380; Sublot 2, 5440; Sublot 3, 4210; Sublot 4, 4960 [no data shown for sublots 5-9]
Information must be provided for at least 3 full sublots
Lot AQL, psi: 4500
Lot RQL, psi: 3000
Lot MQL, psi: 5500
Resulting Samples per lot (n): 3
Replicates per lot (m): 2.0
Lot Strength Mean, psi: 4676.7
Lot Strength Mean Acceptable? Yes
Notes on Lot Strength Mean: Lot mean strength is between RQL and MQL.
Notes on Sublot Strength Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 0.8862
Lot Strength Std. Dev., psi: 531.81
Resulting Pay Factor: 100.79%

SMOOTHNESS:

PI for Pass 1, in/mi: Sublot 1, 434; Sublot 2, 2.85; Sublot 3, 0 [no data shown for sublots 4-9]
PI for Pass 2, in/mi: Sublot 1, 4.8; Sublot 2, 6.15; Sublot 3, 3.7 [no data shown for sublots 4-9]
PI for Pass 3, in/mi: Sublot 1, 5.3; Sublot 2, 1.95; Sublot 3, 7.65 [no data shown for sublots 4-9]
PI for Pass 4, in/mi: Sublot 1, 4.4; Sublot 2, 3.15; Sublot 3, 5.55 [no data shown for sublots 4-9]
Sublot Mean PI, in/mi: Sublot 1, 4.73; Sublot 2, 3.53; Sublot 3, 4.23 [no data shown for sublots 4-9]
Information must be provided for at least 3 full sublots
Lot AQL, in/mi: 7.0
Lot RQL, in/mi: 9.0
Lot MQL, in/mi: 0.0
Resulting Samples per lot (n): 3
Replicates per lot (m): 4.0
Lot PI Mean, in/mi: 3.7
Lot PI Mean Acceptable? Yes
Notes on Lot Smoothness Mean: Lot mean smoothness is between RQL and MQL.
Notes on Sublot Smoothness Mean: All sublots are at or below RQL.
Std. Dev. Correction Factor: 0.8862
Lot Smoothness Std. Dev., in/mi: 0.34
Resulting Pay Factor: 103.75%

RESULTS:

All Pay Factors Determined? Yes
Equal Number of Sublots? Yes
PF Thickness: 100.52%
PF Strength: 100.79%
PF Smoothness: 103.75%
PF Composite: 105.11%
Payadj (lot): $5,141.89
Pay (lot): $105,677.89


Table B-8. Southbound Lot 8 PRS Computation Results.

LOT INFORMATION:

Lot Number: 8
Bid Price, $/sq yd: 31.95
Lot Length, feet: 2173
Lot Width, feet: 24
Resulting Lot Area, sq yds: 5794.67
Project No.: --
Begin Station: 489+02
End Station: 510+75
Lane No’s.: 4 & 5
Paving Date (s): --

THICKNESS:

Thickness Core 1, in: Sublot 1, 13.1; Sublot 2, 12.6; Sublot 3, 13, Sublot 4, 13, Sublot 5, 12.9 [no data shown for sublots 6-9]
Thickness IE 1 (avg of 3), in: --
Sublot Thickness, in.: Sublot 1, 13.1; Sublot 2, 12.6; Sublot 3, 13; Sublot 4, 13, Sublot 5, 12.9 [no data shown for sublots 6-9]
Information must be provided for at least 3 full sublots
Lot ACQ, in: 13.0
Lot RQL, in: 12.0
Lot MQL, in: 14.0
Resulting Samples per lot (n): 5
Lot Thickness Mean, in: 12.9
Lot Thickness Mean Acceptable? Yes
Notes on Lot Thickness Mean: Lot mean thickness is between RQL and MQL.
Notes on Sublot Thickness Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 0.9399
Lot Thickness Std. Dev., in: 0.20465
Resulting Pay Factor: 99.87%

STRENGTH:

Strength cylinder 1, psi: Sublot 1, 4,340; Sublot 2, 4,440; Sublot 3, 4,260; Sublot 4, 4,390; Sublot 5, 4,605 [no data shown for sublots 6-9]
Strength cylinder 2, psi: Sublot 1, 4,535; Sublot 2, 4,630; Sublot 3, 4,200; Sublot 4, 4,460; Sublot 5, 4,250 [no data shown for sublots 6-9]
Sublot Strength, psi: Sublot 1, 4437.5; Sublot 2, 4535; Sublot 3, 4230; Sublot 4, 4425, Sublot 5, 4427.5 [no data shown for sublots 6-9]
Information must be provided for at least 3 full sublots
Lot AQL, psi: 4500
Lot RQL, psi: 3000
Lot MQL, psi: 5500
Resulting Samples per lot (n): 5
Replicates per lot (m): 2.0
Lot Strength Mean, psi: 4411.0
Lot Strength Mean Acceptable? Yes
Notes on Lot Strength Mean: Lot mean strength is between RQL and MQL.
Notes on Sublot Strength Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 0.9399
Lot Strength Std. Dev., psi: 83.53
Resulting Pay Factor: 99.89%

SMOOTHNESS:

PI for Pass 1, in/mi: Sublot 1, 6.96; Sublot 2, 2.6; Sublot 3, 5.3; Sublot 4, 4.8; Sublot 5, 3.7 [no data shown for sublots 6-9]
PI for Pass 2, in/mi: Sublot 1, 5.57; Sublot 2, 3.9; Sublot 3, 6.3; Sublot 4, 4.4; Sublot 5, 5.9 [no data shown for sublots 6-9]
PI for Pass 3, in/mi: Sublot 1, 4.88; Sublot 2, 2.9; Sublot 3, 3.9; Sublot 4, 2.8; Sublot 5, 7.5 [no data shown for sublots 6-9]
PI for Pass 4, in/mi: Sublot 1, 0; Sublot 2, 3.5; Sublot 3, 6.8; Sublot 4, 1.2; Sublot 5, 6.3 [no data shown for sublots 6-9]
Sublot Mean PI, in/mi: Sublot 1, 4.35; Sublot 2, 3.23; Sublot 3, 5.58; Sublot 4, 3.30; Sublot 5, 5.85 [no data shown for sublots 6-9]
Information must be provided for at least 3 full sublots
Lot AQL, in/mi: 7.0
Lot RQL, in/mi: 9.0
Lot MQL, in/mi: 0.0
Resulting Samples per lot (n): 5
Replicates per lot (m): 4.0
Lot PI Mean, in/mi: 4.9
Lot PI Mean Acceptable? Yes
Notes on Lot Smoothness Mean: Lot mean smoothness is between RQL and MQL.
Notes on Sublot Smoothness Mean: All sublots are at or below RQL.
Std. Dev. Correction Factor: 0.9399
Lot Smoothness Std. Dev., in/mi: 0.63
Resulting Pay Factor: 102.38%

RESULTS:

All Pay Factors Determined? Yes
Equal Number of Sublots? Yes
PF Thickness: 99.87%
PF Strength: 99.89%
PF Smoothness: 102.38%
PF Composite: 102.14%
Payadj (lot): $3,961.06
Pay (lot): $189,100.66


Table B-9. Southbound Lot 9 PRS Computation Results.

LOT INFORMATION:

Lot Number: 9
Bid Price, $/sq yd: 31.95
Lot Length, feet: 2280
Lot Width, feet: 24
Resulting Lot Area, sq yds: 6080
Project No.: --
Begin Station: 510+75
End Station: 533+55
Lane No’s.: 4 & 5
Paving Date (s): --

THICKNESS:

Thickness Core 1, in: Sublot 1, 13.1; Sublot 2, 13; Sublot 3, 13.1, Sublot 4, 13.1, Sublot 5, 13.1 [no data shown for sublots 6-9]
Thickness IE 1 (avg of 3), in: --
Sublot Thickness, in.: Sublot 1, 13.1; Sublot 2, 13; Sublot 3, 13.1; Sublot 4, 13.1, Sublot 5, 13.1 [no data shown for sublots 6-9]
Information must be provided for at least 3 full sublots
Lot ACQ, in: 13.0
Lot RQL, in: 12.0
Lot MQL, in: 14.0
Resulting Samples per lot (n): 5
Lot Thickness Mean, in: 13.1
Lot Thickness Mean Acceptable? Yes
Notes on Lot Thickness Mean: Lot mean thickness is between RQL and MQL.
Notes on Sublot Thickness Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 0.9399
Lot Thickness Std. Dev., in: 0.04758
Resulting Pay Factor: 100.70%

STRENGTH:

Strength cylinder 1, psi: Sublot 1, 4,765; Sublot 2, 4,710; Sublot 3, 5,080; Sublot 4, 4,720; Sublot 5, 4,160 [no data shown for sublots 6-9]
Strength cylinder 2, psi: Sublot 1, 4,735; Sublot 2, 4,760; Sublot 3, 5,180; Sublot 4, 4,650; Sublot 5, 4,905 [no data shown for sublots 6-9]
Sublot Strength, psi: Sublot 1, 4750; Sublot 2, 4735; Sublot 3, 5130; Sublot 4, 4685, Sublot 5, 4532.5 [no data shown for sublots 6-9]
Information must be provided for at least 3 full sublots
Lot AQL, psi: 4500
Lot RQL, psi: 3000
Lot MQL, psi: 5500
Resulting Samples per lot (n): 5
Replicates per lot (m): 2.0
Lot Strength Mean, psi: 4766.5
Lot Strength Mean Acceptable? Yes
Notes on Lot Strength Mean: Lot mean strength is between RQL and MQL.
Notes on Sublot Strength Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 0.9399
Lot Strength Std. Dev., psi: 166.02
Resulting Pay Factor: 101.52%

SMOOTHNESS:

PI for Pass 1, in/mi: Sublot 1, 1.4; Sublot 2, 3.2; Sublot 3, 2.3; Sublot 4, 0; Sublot 5, 9.68 [no data shown for sublots 6-9]
PI for Pass 2, in/mi: Sublot 1, 1.9; Sublot 2, 3.9; Sublot 3, 3.8; Sublot 4, 1.39; Sublot 5, 17.78 [no data shown for sublots 6-9]
PI for Pass 3, in/mi: Sublot 1, 2; Sublot 2, 3.2; Sublot 3, 5.2; Sublot 4, 0.67; Sublot 5, 7.92 [no data shown for sublots 6-9]
PI for Pass 4, in/mi: Sublot 1, 1.6; Sublot 2, 4.6; Sublot 3, 4.4; Sublot 4, 1.78; Sublot 5, 9.51 [no data shown for sublots 6-9]
Sublot Mean PI, in/mi: Sublot 1, 1.73; Sublot 2, 3.73; Sublot 3, 3.93; Sublot 4, 0.96; Sublot 5, 11.22 [no data shown for sublots 6-9]
Information must be provided for at least 3 full sublots
Lot AQL, in/mi: 7.0
Lot RQL, in/mi: 9.0
Lot MQL, in/mi: 0.0
Resulting Samples per lot (n): 5
Replicates per lot (m): 4.0
Lot PI Mean, in/mi: 4.5
Lot PI Mean Acceptable? Yes
Notes on Lot Smoothness Mean: Lot mean smoothness is between RQL and MQL.
Notes on Sublot Smoothness Mean: Sublot(s) above RQL
Std. Dev. Correction Factor: 0.9399
Lot Smoothness Std. Dev., in/mi: 0.65
Resulting Pay Factor: 102.81%

RESULTS:

All Pay Factors Determined? Yes
Equal Number of Sublots? Yes
PF Thickness: 100.70%
PF Strength: 101.52%
PF Smoothness: 102.81%
PF Composite: 105.11%
Payadj (lot): $9,922.34
Pay (lot): $204,178.34

Table B-10. Southbound Lot 10 PRS Computation Results.

LOT INFORMATION:

Lot Number: 10
Bid Price, $/sq yd: 31.95
Lot Length, feet: 1823
Lot Width, feet: 24
Resulting Lot Area, sq yds: 4861.33
Project No.: --
Begin Station: 535+15
End Station: 553+38
Lane No’s.: 4 & 5
Paving Date (s): --

THICKNESS:

Thickness Core 1, in: Sublot 1, 12.9; Sublot 2, 12.9; Sublot 3, 13, Sublot 4, 13 [no data shown for sublots 5-9]
Thickness IE 1 (avg of 3), in: --
Sublot Thickness, in.: Sublot 1, 12.9; Sublot 2, 12.9; Sublot 3, 13; Sublot 4, 13 [no data shown for sublots 5-9]
Information must be provided for at least 3 full sublots
Lot ACQ, in: 13.0
Lot RQL, in: 12.0
Lot MQL, in: 14.0
Resulting Samples per lot (n): 4
Lot Thickness Mean, in: 13.0
Lot Thickness Mean Acceptable? Yes
Notes on Lot Thickness Mean: Lot mean thickness is between RQL and MQL.
Notes on Sublot Thickness Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 0.9213
Lot Thickness Std. Dev., in: 0.06267
Resulting Pay Factor: 100.18%

STRENGTH:

Strength cylinder 1, psi: Sublot 1, 5,320; Sublot 2, 5,240; Sublot 3, 4,910; Sublot 4, 4,640 [no data shown for sublots 5-9]
Strength cylinder 2, psi: Sublot 1, 5,775; Sublot 2, 5,340; Sublot 3, 4,830; Sublot 4, 4,760 [no data shown for sublots 5-9]
Sublot Strength, psi: Sublot 1, 5547.5; Sublot 2, 5290; Sublot 3, 4870; Sublot 4, 4700 [no data shown for sublots 5-9]
Information must be provided for at least 3 full sublots
Lot AQL, psi: 4500
Lot RQL, psi: 3000
Lot MQL, psi: 5500
Resulting Samples per lot (n): 4
Replicates per lot (m): 2.0
Lot Strength Mean, psi: 5101.9
Lot Strength Mean Acceptable? Yes
Notes on Lot Strength Mean: Lot mean strength is between RQL and MQL.
Notes on Sublot Strength Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 0.9213
Lot Strength Std. Dev., psi: 297.00
Resulting Pay Factor: 102.93%

SMOOTHNESS:

PI for Pass 1, in/mi: Sublot 1, 4.22; Sublot 2, 1.9; Sublot 3, 0.9; Sublot 4, 2.1 [no data shown for sublots 5-9]
PI for Pass 2, in/mi: Sublot 1, 4.75; Sublot 2, 1.9; Sublot 3, 0.4; Sublot 4, 1 [no data shown for sublots 5-9]
PI for Pass 3, in/mi: Sublot 1, 4.75; Sublot 2, 1.7; Sublot 3, 1.1; Sublot 4, 1.5 [no data shown for sublots 5-9]
PI for Pass 4, in/mi: Sublot 1, 4.23; Sublot 2, 2.6; Sublot 3, 1.9; Sublot 4, 4.9 [no data shown for sublots 5-9]
Sublot Mean PI, in/mi: Sublot 1, 4.49; Sublot 2, 2.03; Sublot 3, 1.08; Sublot 4, 2.38 [no data shown for sublots 5-9]
Information must be provided for at least 3 full sublots
Lot AQL, in/mi: 7.0
Lot RQL, in/mi: 9.0
Lot MQL, in/mi: 0.0
Resulting Samples per lot (n): 4
Replicates per lot (m): 4.0
Lot PI Mean, in/mi: 2.1
Lot PI Mean Acceptable? Yes
Notes on Lot Smoothness Mean: Lot mean smoothness is between RQL and MQL.
Notes on Sublot Smoothness Mean: All sublots are at or below RQL
Std. Dev. Correction Factor: 0.9213
Lot Smoothness Std. Dev., in/mi: 0.96
Resulting Pay Factor: 105.19%

RESULTS:

All Pay Factors Determined? Yes
Equal Number of Sublots? Yes
PF Thickness: 100.18%
PF Strength: 102.93%
PF Smoothness: 105.19%
PF Composite: 108.46%
Payadj (lot): $13,135.12
Pay (lot): $168,454.72


Table B-11. Southbound Lot 11 PRS Computation Results.

LOT INFORMATION:

Lot Number: 11
Bid Price, $/sq yd: 31.95
Lot Length, feet: 1557
Lot Width, feet: 24
Resulting Lot Area, sq yds: 4512.00
Project No.: --
Begin Station: 553+38
End Station: 568+95
Lane No’s.: 4 & 5
Paving Date (s): --

THICKNESS:

Thickness Core 1, in: Sublot 1, 13.1; Sublot 2, 13; Sublot 3, 13, Sublot 4, 13.1 [no data shown for sublots 5-9]
Thickness IE 1 (avg of 3), in: --
Sublot Thickness, in.: Sublot 1, 13.1; Sublot 2, 13; Sublot 3, 13; Sublot 4, 13.1 [no data shown for sublots 5-9]
Information must be provided for at least 3 full sublots
Lot ACQ, in: 13.0
Lot RQL, in: 12.0
Lot MQL, in: 14.0
Resulting Samples per lot (n): 4
Lot Thickness Mean, in: 13.1
Lot Thickness Mean Acceptable? Yes
Notes on Lot Thickness Mean: Lot mean thickness is between RQL and MQL.
Notes on Sublot Thickness Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 0.9213
Lot Thickness Std. Dev., in: 0.06267
Resulting Pay Factor: 100.58%

STRENGTH:

Strength cylinder 1, psi: Sublot 1, 4,850; Sublot 2, 4,860; Sublot 3, 4,520; Sublot 4, 4,740 [no data shown for sublots 5-9]
Strength cylinder 2, psi: Sublot 1, 4,840; Sublot 2, 4,820; Sublot 3, 4,860; Sublot 4, 4,600 [no data shown for sublots 5-9]
Sublot Strength, psi: Sublot 1, 4845; Sublot 2, 4840; Sublot 3, 4690; Sublot 4, 4670 [no data shown for sublots 5-9]
Information must be provided for at least 3 full sublots
Lot AQL, psi: 4500
Lot RQL, psi: 3000
Lot MQL, psi: 5500
Resulting Samples per lot (n): 4
Replicates per lot (m): 2.0
Lot Strength Mean, psi: 4761.3
Lot Strength Mean Acceptable? Yes
Notes on Lot Strength Mean: Lot mean strength is between RQL and MQL.
Notes on Sublot Strength Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 0.9213
Lot Strength Std. Dev., psi: 72.30
Resulting Pay Factor: 101.57%

SMOOTHNESS:

PI for Pass 1, in/mi: Sublot 1, 3.7; Sublot 2, 1.3; Sublot 3, 0.9; Sublot 4, 3.5 [no data shown for sublots 5-9]
PI for Pass 2, in/mi: Sublot 1, 6.3; Sublot 2, 2.8; Sublot 3, 3.4; Sublot 4, 4 [no data shown for sublots 5-9]
PI for Pass 3, in/mi: Sublot 1, 5.3; Sublot 2, 0.8; Sublot 3, 0.6; Sublot 4, 3 [no data shown for sublots 5-9]
PI for Pass 4, in/mi: Sublot 1, 5.5; Sublot 2, 2.7; Sublot 3, 1.8; Sublot 4, 3 [no data shown for sublots 5-9]
Sublot Mean PI, in/mi: Sublot 1, 5.20; Sublot 2, 1.90; Sublot 3, 1.68; Sublot 4, 3.38 [no data shown for sublots 5-9]
Information must be provided for at least 3 full sublots
Lot AQL, in/mi: 7.0
Lot RQL, in/mi: 9.0
Lot MQL, in/mi: 0.0
Resulting Samples per lot (n): 4
Replicates per lot (m): 4.0
Lot PI Mean, in/mi: 3.2
Lot PI Mean Acceptable? Yes
Notes on Lot Smoothness Mean: Lot mean smoothness is between RQL and MQL.
Notes on Sublot Smoothness Mean: All sublots are at or below RQL
Std. Dev. Correction Factor: 0.9213
Lot Smoothness Std. Dev., in/mi: 1.07
Resulting Pay Factor: 104.13%

RESULTS:

All Pay Factors Determined? Yes
Equal Number of Sublots? Yes
PF Thickness: 100.58%
PF Strength: 101.57%
PF Smoothness: 104.13%
PF Composite: 106.39%
Payadj (lot): $8,470.70
Pay (lot): $141,127.10

Table B-12. Southbound Lot 12 PRS Computation Results.

LOT INFORMATION:

Lot Number: 12
Bid Price, $/sq yd: 31.95
Lot Length, feet: 1693
Lot Width, feet: 24
Resulting Lot Area, sq yds: 4514.67
Project No.: --
Begin Station: 568+95
End Station: 585+88
Lane No’s.: 4 & 5
Paving Date (s): --

THICKNESS:

Thickness Core 1, in: Sublot 1, 13.1; Sublot 2, 12.8; Sublot 3, 13.1, Sublot 4, 12.5 [no data shown for sublots 5-9]
Thickness IE 1 (avg of 3), in: --
Sublot Thickness, in.: Sublot 1, 13.1; Sublot 2, 12.8; Sublot 3, 13.1; Sublot 4, 12.5 [no data shown for sublots 5-9]
Information must be provided for at least 3 full sublots
Lot ACQ, in: 13.0
Lot RQL, in: 12.0
Lot MQL, in: 14.0
Resulting Samples per lot (n): 4
Lot Thickness Mean, in: 12.9
Lot Thickness Mean Acceptable? Yes
Notes on Lot Thickness Mean: Lot mean thickness is between RQL and MQL.
Notes on Sublot Thickness Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 0.9213
Lot Thickness Std. Dev., in: 0.31176
Resulting Pay Factor: 99.50%

STRENGTH:

Strength cylinder 1, psi: Sublot 1, 4,620; Sublot 2, 4,740; Sublot 3, 3,700; Sublot 4, 5,180 [no data shown for sublots 5-9]
Strength cylinder 2, psi: Sublot 1, 4,925; Sublot 2, 4,850; Sublot 3, 3,840; Sublot 4, 4,730 [no data shown for sublots 5-9]
Sublot Strength, psi: Sublot 1, 4772.5; Sublot 2, 4795; Sublot 3, 3770; Sublot 4, 4955 [no data shown for sublots 5-9]
Information must be provided for at least 3 full sublots
Lot AQL, psi: 4500
Lot RQL, psi: 3000
Lot MQL, psi: 5500
Resulting Samples per lot (n): 4
Replicates per lot (m): 2.0
Lot Strength Mean, psi: 4573.1
Lot Strength Mean Acceptable? Yes
Notes on Lot Strength Mean: Lot mean strength is between RQL and MQL.
Notes on Sublot Strength Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 0.9213
Lot Strength Std. Dev., psi: 415.64
Resulting Pay Factor: 100.41%

SMOOTHNESS:

PI for Pass 1, in/mi: Sublot 1, 3; Sublot 2, 4.5; Sublot 3, 4.1; Sublot 4, 1.2 [no data shown for sublots 5-9]
PI for Pass 2, in/mi: Sublot 1, 2.6; Sublot 2, 5.1; Sublot 3, 3.8; Sublot 4, 3.6 [no data shown for sublots 5-9]
PI for Pass 3, in/mi: Sublot 1, 2.3; Sublot 2, 2.6; Sublot 3, 3.7; Sublot 4, 3.2 [no data shown for sublots 5-9]
PI for Pass 4, in/mi: Sublot 1, 2.4; Sublot 2, 2.7; Sublot 3, 3.4; Sublot 4, 6.4 [no data shown for sublots 5-9]
Sublot Mean PI, in/mi: Sublot 1, 2.58; Sublot 2, 3.73; Sublot 3, 3.75; Sublot 4, 3.60 [no data shown for sublots 5-9]
Information must be provided for at least 3 full sublots
Lot AQL, in/mi: 7.0
Lot RQL, in/mi: 9.0
Lot MQL, in/mi: 0.0
Resulting Samples per lot (n): 4
Replicates per lot (m): 4.0
Lot PI Mean, in/mi: 3.5
Lot PI Mean Acceptable? Yes
Notes on Lot Smoothness Mean: Lot mean smoothness is between RQL and MQL.
Notes on Sublot Smoothness Mean: All sublots are at or below RQL
Std. Dev. Correction Factor: 0.9213
Lot Smoothness Std. Dev., in/mi: 0.36
Resulting Pay Factor: 103.92%

RESULTS:

All Pay Factors Determined? Yes
Equal Number of Sublots? Yes
PF Thickness: 99.50%
PF Strength: 100.41%
PF Smoothness: 103.92%
PF Composite: 103.83%
Payadj (lot): $5,517.48
Pay (lot): $149,761.08


Table B-13. Southbound Lot 13 PRS Computation Results.

LOT INFORMATION:

Lot Number: 13
Bid Price, $/sq yd: 31.95
Lot Length, feet: 1872
Lot Width, feet: 24
Resulting Lot Area, sq yds: 4992.00
Project No.: --
Begin Station: 585+88
End Station: 604+60
Lane No’s.: 4 & 5
Paving Date (s): --

THICKNESS:

Thickness Core 1, in: Sublot 1, 12.8; Sublot 2, 12.9; Sublot 3, 13, Sublot 4, 12.7 [no data shown for sublots 5-9]
Thickness IE 1 (avg of 3), in: --
Sublot Thickness, in.: Sublot 1, 12.8; Sublot 2, 12.9; Sublot 3, 13; Sublot 4, 12.7 [no data shown for sublots 5-9]
Information must be provided for at least 3 full sublots
Lot ACQ, in: 13.0
Lot RQL, in: 12.0
Lot MQL, in: 14.0
Resulting Samples per lot (n): 4
Lot Thickness Mean, in: 12.9
Lot Thickness Mean Acceptable? Yes
Notes on Lot Thickness Mean: Lot mean thickness is between RQL and MQL.
Notes on Sublot Thickness Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 0.9213
Lot Thickness Std. Dev., in: 0.14013
Resulting Pay Factor: 99.60%

STRENGTH:

Strength cylinder 1, psi: Sublot 1, 4,610; Sublot 2, 4,460; Sublot 3, 4,960; Sublot 4, 4,530 [no data shown for sublots 5-9]
Strength cylinder 2, psi: Sublot 1, 4,960; Sublot 2, 4,710; Sublot 3, 4,330; Sublot 4, 4,490 [no data shown for sublots 5-9]
Sublot Strength, psi: Sublot 1, 4785; Sublot 2, 4585; Sublot 3, 4645; Sublot 4, 4510 [no data shown for sublots 5-9]
Information must be provided for at least 3 full sublots
Lot AQL, psi: 4500
Lot RQL, psi: 3000
Lot MQL, psi: 5500
Resulting Samples per lot (n): 4
Replicates per lot (m): 2.0
Lot Strength Mean, psi: 4631.3
Lot Strength Mean Acceptable? Yes
Notes on Lot Strength Mean: Lot mean strength is between RQL and MQL.
Notes on Sublot Strength Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 0.9213
Lot Strength Std. Dev., psi: 89.36
Resulting Pay Factor: 100.95%

SMOOTHNESS:

PI for Pass 1, in/mi: Sublot 1, 1.2; Sublot 2, 1.3; Sublot 3, 0.68; Sublot 4, 1.15 [no data shown for sublots 5-9]
PI for Pass 2, in/mi: Sublot 1, 3.6; Sublot 2, 4.2; Sublot 3, 4.59; Sublot 4, 7.8 [no data shown for sublots 5-9]
PI for Pass 3, in/mi: Sublot 1, 3.2; Sublot 2, 4.8; Sublot 3, 4.55; Sublot 4, 7.67 [no data shown for sublots 5-9]
PI for Pass 4, in/mi: Sublot 1, 6.4; Sublot 2, 3.5; Sublot 3, 1.18; Sublot 4, 1.99 [no data shown for sublots 5-9]
Sublot Mean PI, in/mi: Sublot 1, 3.60; Sublot 2, 3.45; Sublot 3, 2.75; Sublot 4, 4.65 [no data shown for sublots 5-9]
Information must be provided for at least 3 full sublots
Lot AQL, in/mi: 7.0
Lot RQL, in/mi: 9.0
Lot MQL, in/mi: 0.0
Resulting Samples per lot (n): 4
Replicates per lot (m): 4.0
Lot PI Mean, in/mi: 3.1
Lot PI Mean Acceptable? Yes
Notes on Lot Smoothness Mean: Lot mean smoothness is between RQL and MQL.
Notes on Sublot Smoothness Mean: All sublots are at or below RQL
Std. Dev. Correction Factor: 0.9213
Lot Smoothness Std. Dev., in/mi: 0.25
Resulting Pay Factor: 104.36%

RESULTS:

All Pay Factors Determined? Yes
Equal Number of Sublots? Yes
PF Thickness: 99.60%
PF Strength: 100.95%
PF Smoothness: 104.36%
PF Composite: 104.93%
Payadj (lot): $7,869.53
Pay (lot): $167,363.93

Table B-14. Southbound Lot 14 PRS Computation Results.

LOT INFORMATION:

Lot Number: 14
Bid Price, $/sq yd: 31.95
Lot Length, feet: 1850
Lot Width, feet: 24
Resulting Lot Area, sq yds: 4933.33
Project No.: --
Begin Station: 626+21
End Station: 644+71
Lane No’s.: 4 & 5
Paving Date (s): --

THICKNESS:

Thickness Core 1, in: Sublot 1, 12.5; Sublot 2, 13.1; Sublot 3, 13, [no data shown for sublots 4-9]
Thickness IE 1 (avg of 3), in: --
Sublot Thickness, in.: Sublot 1, 12.5; Sublot 2, 13.1; Sublot 3, 13 [no data shown for sublots 4-9]
Information must be provided for at least 3 full sublots
Lot ACQ, in: 13.0
Lot RQL, in: 12.0
Lot MQL, in: 14.0
Resulting Samples per lot (n): 3
Lot Thickness Mean, in: 12.9
Lot Thickness Mean Acceptable? Yes
Notes on Lot Thickness Mean: Lot mean thickness is between RQL and MQL.
Notes on Sublot Thickness Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 0.8862
Lot Thickness Std. Dev., in: 0.36273
Resulting Pay Factor: 99.39%

STRENGTH:

Strength cylinder 1, psi: Sublot 1, 5,340; Sublot 2, 4,750; Sublot 3, 5,435; [no data shown for sublots 4-9]
Strength cylinder 2, psi: Sublot 1, 5,530; Sublot 2, 4,780; Sublot 3, 4,765 [no data shown for sublots 4-9]
Sublot Strength, psi: Sublot 1, 5435; Sublot 2, 4765; Sublot 3, 5100 [no data shown for sublots 5-9]
Information must be provided for at least 3 full sublots
Lot AQL, psi: 4500
Lot RQL, psi: 3000
Lot MQL, psi: 5500
Resulting Samples per lot (n): 3
Replicates per lot (m): 2.0
Lot Strength Mean, psi: 5100.0
Lot Strength Mean Acceptable? Yes
Notes on Lot Strength Mean: Lot mean strength is between RQL and MQL.
Notes on Sublot Strength Mean: All sublots are at or above RQL
Std. Dev. Correction Factor: 0.8862
Lot Strength Std. Dev., psi: 267.30
Resulting Pay Factor: 102.94%

SMOOTHNESS:

PI for Pass 1, in/mi: Sublot 1, 3.9; Sublot 2, 6.3; Sublot 3, 3.41 [no data shown for sublots 4-9]
PI for Pass 2, in/mi: Sublot 1, 1.8; Sublot 2, 4.8; Sublot 3, 2.62 [no data shown for sublots 4-9]
PI for Pass 3, in/mi: Sublot 1, 8.6; Sublot 2, 5.45; Sublot 3, 7.21 [no data shown for sublots 4-9]
PI for Pass 4, in/mi: Sublot 1, 6.5; Sublot 2, 4.18; Sublot 3, 5.48 [no data shown for sublots 4-9]
Sublot Mean PI, in/mi: Sublot 1, 5.20; Sublot 2, 5.18; Sublot 3, 4.68 [no data shown for sublots 4-9]
Information must be provided for at least 3 full sublots
Lot AQL, in/mi: 7.0
Lot RQL, in/mi: 9.0
Lot MQL, in/mi: 0.0
Resulting Samples per lot (n): 3
Replicates per lot (m): 4.0
Lot PI Mean, in/mi: 3.8
Lot PI Mean Acceptable? Yes
Notes on Lot Smoothness Mean: Lot mean smoothness is between RQL and MQL.
Notes on Sublot Smoothness Mean: All sublots are at or below RQL
Std. Dev. Correction Factor: 0.8862
Lot Smoothness Std. Dev., in/mi: 0.17
Resulting Pay Factor: 103.59%

RESULTS:

All Pay Factors Determined? Yes
Equal Number of Sublots? Yes
PF Thickness: 99.39%
PF Strength: 102.94%
PF Smoothness: 103.59%
PF Composite: 105.98%
Payadj (lot): $9,432.15
Pay (lot): $167,052.15

<< Previous ContentsNext >>
Updated: 04/07/2011

FHWA
United States Department of Transportation - Federal Highway Administration