| STATE_CODE |
Numerical code for State or Province. |
| SHRP_ID |
Test section identification number assigned by LTPP. |
| SMP_DATE |
Date TDR trace was obtained. |
| TDR_TIME |
Time TDR trace was obtained. |
| TDR_NO |
TDR sensor number. |
| TLE_BEGIN |
Starting point of interval on TDR trace captured for use in the Transmission Line Equation. |
| TLE_END |
Ending point of interval on TDR trace captured for use in the Transmission Line Equation. |
| SOIL_DIELECTRIC |
Dielectric constant estimated from TDR trace (from SMP_TDR_AUTO). |
| SOIL_CONDUCTIVITY |
Conductivity estimated from TDR trace (from SMP_TDR_AUTO). |
| SOIL_REFLECTIVITY |
Reflectivity estimated from TDR trace (from SMP_TDR_AUTO). |
| DRY_DENSITY |
Dry density estimated from SOIL_DIELECTRIC and calibrated micromechanics equation. |
| VOLUMETRIC_MOISTURE_CONTENT |
VMC estimated from SOIL_DIELECTRIC and calibrated micromechanics equation. |
| GRAVIMETRIC_MOISTURE_CONTENT |
GMC estimated from VMC and DRY_DENSITY. |
| TDR_COMPUTATION_COMMENT_CODE |
Codes to describe traces that could not be interpreted. 1-TDR trace uninterpretable due to lack of negative slope 2-Questionable data due to low dry density value 3-Calibration data from installation activities are unavailable 4-Outlier data based on time series analysis 5-Volumetric moisture content was in transition zone and was adjusted |