U.S. Department of Transportation
Federal Highway Administration
1200 New Jersey Avenue, SE
Washington, DC 20590
202-366-4000


Skip to content U.S. Department of Transportation/Federal Highway AdministrationU.S. Department of Transportation/Federal Highway Administration

Accelerating Innovation

FHWA Home / Accelerating Innovation / State Transportation Innovation Councils / STIC Incentive Allocations

State-Based Innovation Deployment - The STIC Network helps to establish a group of representatives from various levels of the highway community in each State to comprehensively and strategically consider all sources of innovation. Learn about STIC.

STIC Incentive Allocations

The STIC Incentive Program provides resources to the STICs to create innovations standard practice within their States. Limited funds are provided to support or offset the costs of standardizing innovative practices in a State transportation agency or any other public sector STIC stakeholder. The following projects were funded in FY 2014.

State STIC Incentive Projects Funds Allocated
NH
  1. State Historic Architectural and Archeological Database ($40,000)
  2. Development of Standards to Support 3D Modeling ($30,000)
  3. Ground-Penetrating Radar ($30,000)
$ 100,000
MO
  1. Development of Details and Specifications for Fiber Reinforced Polymer Bridge Deck Panel ($85,000)
  2. High Friction Surface Treatment Exchange ($15,000)
$ 100,000
PA
  1. Rumble Strip Installation on Thin Pavement Overlays Compendium
  2. High Friction Surface Treatment Binder Evaluation
$ 100,000
AR
  1. Traffic Incident Management (TIM) Training ($6,000)
  2. 3D Modeling Implementation Plan ($94,000)
$ 100,000
AZ Initiate an Innovation Exchange $ 85,000
MI
  1. Report on Pilot Application of Geospatial Utility Infrastructure Data Exchange (GUIDE)
  2. Diverging Diamond Interchange (DDI) scan in Missouri and development of DDI guidance document
  3. Development of Construction Manual Guidance & Standard Specification language for utilization of AMG/AMC & Stringless Paving
$ 100,000
VT Development of a Design-Build Guidance Document $ 100,000
OH
  1. Implementation of Quality Environmental Document Manual/Guidance ($60,000)
  2. Local Public Agencies (LPA) Day - Training on the Updated Certification Process ($24,000)
  3. Cost Savings Innovations Best Practices Database ($16,000)
$ 100,000
MA
  1. Development of Design-Build RFP Templates and Design-Build Manual ($80,000)
  2. Regional Stakeholder Partnering Workshops to Establish an LPA "Pilot" Program ($20,000)
$ 100,000
NC Development and implementation of a Local Government Agency Certification Program $ 100,000
MN
  1. Development of performance specifications for Asphalt Mixture Performance Testing for Fatigue and Thermal Cracking ($40,000)
  2. Implementation of Thin Bonded Concrete Overlays of Asphalt Pavements ($19,500)
  3. Development of a "Best Practices" document for Soil Stabilization Design and Construction Procedures ($35,000)
$ 94,500
WY Advancement of the Geospatial Data Collaboration initiative $ 100,000
OK
  1. 3D Modeling Equipment for Construction Verification
  2. Use of Chat Mine Aggregate on a High Friction Surface Treatment
$ 100,000
RI
  1. Implementing Geospatial Data Collaboration and Creating a Programmatic Agreement for historic resources ($45,000);
  2. Facilitating CMGC Training and Hosting a CMGC Workshop ($15,000)
  3. Implementing 3D/4D/5D AutoCAD Infaworks 360 Program ($20,000)
  4. Developing 3D/4D/5D Modeling Standards for Intermodal Projects ($20,000)
$ 100,000
UT Development of a 3D Utility Database $ 100,000
KS Development of standard drawings for low-cost bridge options $ 100,000
NM Creation of a digital experience (via kiosks and mobile devices) and other educational material on the use of Diverging Diamond Interchanges $ 100,000
NV Development of an Implementation Plan for the Nevada DOT Local Public Agency (LPA) Certification Program $ 96,200
AL Development of Procedures and Best Practices for Utilizing 3-D Data for Survey, Design, Visualization and Clash Detection Analysis $ 100,000
CO Development and Implementation of a Re-vegetation Training Program $ 50,000
LA Development of an Alternative Delivery Selection Matrix, standardized Request for Qualifications and Statements of Qualifications for Construction Manager at Risk $ 100,000
MS Development an Accelerated Bridge Construction guideline $ 100,000
ME
  1. Traffic Incident Information Exchange, E911 Location Verification and Computer Aided Dispatch (CAD) Integration ($27,000)
  2. Continued refinement of business processes, technologies, and user training in support of the exchange and use of 3D model data for construction ($54,720)
$ 81,720
SC 3D Modeling Equipment for Construction Verification $ 100,000
ID Development of design standards for Geosynthetic Reinforced Soil-Integrated Bridge System technology $ 100,000
VA
  1. Development of standard operating procedures and training course for management and recycling of sodium contaminated stormwater runoff for snow and ice control. ($32,000)
  2. Development of training course for management and disposal of "road kill" as compost. ($48,000)
$ 80,000
IN Development of Intelligent Compaction standard specification for soil embankment and subgrade compaction $ 80,000
Page last modified on September 3, 2014.
Federal Highway Administration | 1200 New Jersey Avenue, SE | Washington, DC 20590 | 202-366-4000