Long Term Pavement Performance Project Laboratory Materials Testing and Handling Guide

Protocol H09L
Design, Testing, and Construction of Slurry Seal (SC05)

This LTPP protocol covers the design, testing, and construction of slurry seal mixtures. It is intended that the tests be performed on the slurry seals to be used as part of the SPS-3 studies. All tests required by ASTM D3910-84 are to be performed in accordance with ASTM D3910-84, Standard Practices for Design, Testing, and Construction of Slurry Seals. Set Time, Cure, Time, Traffic Time and System Classification will be conducted in accordance with the International Slurry Surfacing Association (ISSA) test method TB-139, 1982 - Revised 1990. Consistency is measured in accordance with paragraph 6.1 as modified by ISSA TB 106, 1976 - Revised 1990.

The results will be recorded on LTPP Test Sheet H09.

LTPP LABORATORY MATERIAL HANDLING AND TESTING
LABORATORY MATERIAL TEST DATA
TESTING OF SLURRY SEALS
LAB DATA SHEET H09

SLURRY SEAL PROPERTIES
LTPP TEST DESIGNATION SC05/LTPP PROTOCOL H09L

LABORATORY PERFORMING TEST: _____________________________________________________________

LABORATORY IDENTIFICATION CODE: ___ ___ ___ ___

REGION: _________________________ STATE: STATE CODE: __ __

EXPERIMENT NO: _____ SHRP ID: __ __ __ __

SAMPLED BY: _________________________________________ FIELD SET NO: ___

DATE SAMPLED: __ __ - __ __ - __ __ __ __ SAMPLING AREA NO: SA- ____

1. LAYER NUMBER ___

2. LABORATORY TEST NUMBER __

3. LOCATION NUMBER __ __ __

4. LTPP SAMPLE NUMBER __ __ __ __

5. TEST RESULTS

      (a) CONSISTENCY (FLOW), cm __.__

      (b) SET TIME, hr __ __.__ __

      (c) CURE TIME, hr __ __.__ __

      (d) TRAFFIC TIME, hr __ __.__ __

      (e) SYSTEM CLASSIFICATION __ __ - __ __ __

      (f) WET TRACK ABRASION (LOSS), gm/ft² __ __ __.__

6. COMMENTS

      (a) CODE ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___

      (b) NOTE _______________________________________________________

7. TEST DATE __ __ - __ __ - __ __ __ __