U.S. Department of Transportation
Federal Highway Administration
1200 New Jersey Avenue, SE
Washington, DC 20590
202-366-4000

Skip to content
Facebook iconYouTube iconTwitter iconFlickr iconLinkedInInstagram

Federal Highway Administration Research and Technology
Coordinating, Developing, and Delivering Highway Transportation Innovations

Report
This report is an archived publication and may contain dated technical, contact, and link information
Publication Number: FHWA-RD-02-099
Date: January 2005

References

Previous | Table of Contents

  1. American Concrete Institute (ACI). ACI 308 R. "Guide for Curing Concrete." ACI Manual of Concrete Practice.Farmington Hills, MI.

  2. American Association of State Highway and Transportation Officials (AASHTO). AASHTO T 158. Specification for Bleeding of Concrete. Washington, DC.

  3. AASHTO T 197. Specification for Time of Setting of Concrete Mixtures by Penetration Resistance. Washington, DC.

  4. ACI 308. "Standard Practice for Curing Concrete." ACI Manual of Concrete Practice. Farmington Hills, MI.

  5. ACI 305 R. "Hot Weather Concreting." ACI Manual of Concrete Practice. Farmington Hills, MI.

  6. AASHTO M 85. Specification for Portland Cement. Washington, DC.

  7. American Society for Testing and Materials (ASTM). ASTM C 150. "Standard Specification for Portland Cement." Annual Book of ASTM Standards. Vol. 04.01. West Conshohocken, PA.

  8. AASHTO M 240. Specification for Blended Hydraulic Cement. Washington, DC.

  9. ASTM C 597. "Standard Test Method for Pulse Velocity Through Concrete." Annual Book of ASTM Standards. Vol. 04.02. West Conshohocken, PA.

  10. ASTM C 1157. "Standard Performance Specification for Hydraulic Cement." Annual Book of ASTM Standards. Vol. 04.01. West Conshohocken, PA.

  11. AASHTO M 295. Specification for Coal Fly Ash and Raw or Calcined Pozzolan for Use as a Mineral Admixture in Concrete. Washington, DC.

  12. ASTM C 618. "Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use as a Mineral Admixture in Concrete." Annual Book of ASTM Standards. Vol. 04.02. West Conshohocken, PA.

  13. Poole T.S. Curing of Portland Cement Concrete Pavements, Volume II Final Report. FHWA-HRT-05-038. 2004.

  14. AASHTO Guide Specifications for Highway Construction. Publication code GSH-8. Washington, DC, 1998.

  15. Malhotra, V.M. and A.A. Ramezanianpour. 1994. Fly Ash in Concrete. 2nd Ed. CANMET MSL 94-45(R), Canadian Center for Mineral and Energy Technology, Ottowa, Canada.

  16. ASTM C 232. "Standard Test Method for Bleeding of Concrete." Annual Book of ASTM Standards. Vol. 04.02. West Conshohocken, PA.

  17. AASHTO T 23. Specification for Making and Curing Concrete Test Specimens in the Field. Washington, DC.

  18. ASTM C 31. "Standard Practice for Making and Curing Concrete Test Specimens in the Field." Annual Book of ASTM Standards. Vol. 04.02. West Conshohocken, PA.

  19. ASTM C 403. "Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance." Annual Book of ASTM Standards. Vol. 04.02. West Conshohocken, PA.

  20. AASHTO M 148. Specification for Liquid Membrane-Forming Compounds for Curing Concrete. Washington, DC.

  21. ASTM C 309. "Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete." Annual Book of ASTM Standards. Vol. 04.02. West Conshohocken, PA.

  22. ASTM C 1315. "Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete." Annual Book of ASTM Standards. Vol. 04.02. West Conshohocken, PA.

  23. AASHTO T 155. Specification for Water Retention by Concrete Curing Materials. Washington, DC.

  24. ASTM C 156. "Standard Test Method for Water Retention by Concrete Curing Materials." Annual Book of ASTM Standards. Vol. 04.02. West Conshohocken, PA.

  25. Texas Department of Transportation, Departmental Material Specification: DMS-8120, "Liquid Membrane-Forming Compounds for Curing Concrete." Austin, TX. 1998.

  26. Poole, T.S. "Methods for Measuring Application Rate of Liquid Membrane-Forming Curing Compounds on Concrete Pavements." Proceedings of 7th International Conference on Concrete Pavements, International Society for Concrete Pavements, September 2001, pp. 351-360.

  27. ASTM C 94. "Standard Specification for Ready-Mixed Concrete." Annual Book of ASTM Standards. Vol. 04.02. West Conshohocken, PA.

  28. AASHTO M 182. Specification for Burlap Cloth Made from Jute or Kenaf. Washington, DC.

  29. ASTM C 171. "Standard Specification for Sheet Materials for Curing Concrete." Annual Book of ASTM Standards. Vol. 04.02. West Conshohocken, PA.

  30. AASHTO M 171. Specification for Sheet Materials for Curing Concrete. Washington, DC.

  31. ACI 318. Building Code Requirements for Structural Concrete. ACI Manual of Concrete Practice. Farmington Hills, MI.

  32. ACI 301. "Standard Specification for Structural Concrete." ACI Manual of Concrete Practice. Farmington Hills, MI.

  33. ACI 325.9 R. "Guide for Construction of Concrete Pavements and Concrete Bases." ACI Manual of Concrete Practice. Farmington Hills, MI.

  34. ACI 330 R. "Guide for Design and Construction of Concrete Parking Lots." ACI Manual of Concrete Practice. Farmington Hills, MI.

  35. ASTM C 1074. "Standard Practice for Estimating Concrete Strength by the Maturity Method." Annual Book of ASTM Standards. Vol. 04.02. West Conshohocken, PA.

  36. ASTM C 42. "Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete." Annual Book of ASTM Standards. Vol. 04.02. West Conshohocken, PA.

  37. ASTM C 805. "Standard Test Method for Rebound Number of Hardened Concrete." Annual Book of ASTM Standards. Vol. 04.02. West Conshohocken, PA.

  38. ASTM C 1151. "Test Method for Evaluating the Effectiveness of Materials for Curing Concrete." Now withdrawn. Last existed as ASTM C 1151-91 in Annual Book of ASTM Standards. Vol. 04.02. West Conshohocken, PA.

Other Sources

AASHTO Quality Assurance Guide Specification. Publication code QA-1. Washington, DC, 1996.

AASHTO Construction Manual for Highway Construction. Publication code CM-4. Washington, DC, 1990.

ACI 228.1 R. "In-Place Methods for Determination of Strength of Concrete." ACI Manual of Concrete Practice.Farmington Hills, MI.

ACI 306 R. "Cold Weather Concreting." ACI Manual of Concrete Practice. Farmington Hills, MI.

HIPERPAV

McCullough, B.F. and R.O. Rasmussen. Fast-Track Paving: Concrete Temperature Control and Traffic Opening Criteria for Bonding Concrete Overlays, Volume I: Final Report. Publication No. FHWA-RD-98-167, Washington, DC, October 1999.

McCullough, B.F. and R.O. Rasmussen. Fast-Track Paving: Concrete Temperature Control and Traffic Opening Criteria for Bonding Concrete Overlays, Volume II: HIPERPAV User's Manual. Publication No. FHWA-RD-98-168, Washington, DC, November 1999.

McCullough, B.F. and R.O. Rasmussen. Fast-Track Paving: Concrete Temperature Control and Traffic Opening Criteria for Bonding Concrete Overlays, Volume III: Addendum to the HIPERPAV User's Manual. Publication No. FHWA-RD-99-200, Washington, DC, November 1999.

Additional information on HIPERPAV can be found at www.hiperpav.com and www.fhwa.dot.gov

 

Previous | Table of Contents

Return to top

Privacy Policy | Freedom of Information Act (FOIA) | Accessibility | Web Policies & Notices | No Fear Act | Report Waste, Fraud and Abuse
U.S. DOT Home | USA.gov | WhiteHouse.gov

Federal Highway Administration | 1200 New Jersey Avenue, SE | Washington, DC 20590 | 202-366-4000
Turner-Fairbank Highway Research Center | 6300 Georgetown Pike | McLean, VA | 22101