Skip to contentUnited States Department of Transportation - Federal Highway AdministrationSearch FHWAFeedback

Construction

Request

Action: Notice, request for comments.

Web posting date: 01/22/2010

Federal Register Notice of Finding Publication Date: 06/30/10

Effective Date of Federal Register: 07/01/10

Close of public comment period: 07/16/10

Summary: The Federal Highway Administration (FHWA) is seeking comments on whether a waiver of the Buy America requirements of 23 CFR 635.410 should be granted to permit the use of non-domestic 1" diameter hollow core threaded share anchor rods in the state of Oregon.

FHWA will only consider a Buy America waiver when the conditions of 23 CFR 635.410( c) have been met: (1) when the application of the provision would be inconsistent with the public interest; or (2) when steel and iron products are not produced in the United States in sufficient and reasonably available quantities, which are of a satisfactory quality.

The FHWA will consider all comments received in the initial 15-day comment period during our evaluation of the waiver request. Comments received after this period, but before notice of our finding is published in the Federal Register, will be considered to the extent practical. Follow-up coordination on the comments received may result in a delay in the publication of our waiver finding in the Federal Register. Comments received during the 15-day comment period after notice of our finding is published in the Federal Register will be reviewed, but the finding will continue to remain valid. Comments received during the comment period after the effective date of the finding will be reviewed, and may influence the FHWA's decision to terminate or modify a finding.

ODOT contact: Jim Howell (503)-641-8727 ext. 227

Comments

Dean Rager 01/22/2010
Just by the USA Product. It's Good for all of us.

Anthony J Jordan 01/23/2010
Anchor Rods www.portlandbolt.com Prestressed Hollow Core www.echo-engineering net Threaded Rods Rod.Pronto.com

Thomas Reed 01/27/2010
At this time there is no domestic manufacture of this product. Williams Form Engineering has brought this material in from an England mill for many years for use in rock/concrete anchoring and special applications. Material information available on www.williamsform.com

C Schroeder 02/01/2010
I bet you there are many companies out there that will make them given our current economic state. Have you asked a manufacturer before going overseas which seems to be the easy way?

Byron Perry 02/26/2010
Oregon Bridge Delivery Partners (OBDP) is the Program Manager for the Oregon Transportation Investment Act III State Bridge Program requesting the waiver. I am the Engineering Manager for OBDP. I have reviewed the comments and contacted the companies referenced in Anthony Jordan's comment. None of these companies manufactures this particular piece. I have searched for any other companies that currently manufacture this and have still found no domestic manufacturer. In response to C. Schroeders comments and following a lead from Steven Wallenstein at Portland Bolt, we are pursuing several manufacturers to see if they can produce this for future projects. There are three other projects in our program that need these rods.

Contact

Edwin Okonkwo
Office of Program Administration
202-366-1558
E-mail Edwin

 
 
PDF files can be viewed with the Acrobat® Reader®
Updated: 04/12/2013
 

FHWA
United States Department of Transportation - Federal Highway Administration