U.S. Department of Transportation
Federal Highway Administration
1200 New Jersey Avenue, SE
Washington, DC 20590
202-366-4000
Federal Highway Administration Research and Technology
Coordinating, Developing, and Delivering Highway Transportation Innovations
This report is an archived publication and may contain dated technical, contact, and link information |
|
Publication Number: FHWA-RD-07-052 Date: September 2007 |
This LTPP protocol aids in selecting a compatible slurry seal system with a given aggregate. It is intended for use on the slurry seals as part of the SPS-3 studies. The test is to be performed in accordance with ISSA TB-114 - Revised 1990.
The results will be recorded on LTPP Test Sheet H11.
LTPP LABORATORY MATERIAL HANDLING AND TESTING
LABORATORY MATERIAL TEST DATA
WET-STRIPPING TEST FOR CURRED SLURRY SEAL MIXES
LAB DATA SHEET H11
SLURRY SEAL PROPERTIES
LTPP TEST DESIGNATION SC07/LTPP PROTOCOL H11L
LABORATORY PERFORMING TEST: _____________________________________________________________
LABORATORY IDENTIFICATION CODE: ___ ___ ___ ___
REGION: _________________________ STATE: STATE CODE: __ __
EXPERIMENT NO: _____ SHRP ID: __ __ __ __
SAMPLED BY: _________________________________________ FIELD SET NO: ___
DATE SAMPLED: __ __ - __ __ - __ __ __ __ SAMPLING AREA NO: SA- ____
1. LAYER NUMBER ___
2. LABORATORY TEST NUMBER __
3. LOCATION NUMBER __ __ __
4. LTPP SAMPLE NUMBER __ __ __ __
5. AGGREGATE SURFACE RETAINING COATING, % __ __ __
6. COMMENTS
(a) CODE ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
(b) NOTE _______________________________________________________
7. TEST DATE __ __ - __ __ - __ __ __ __
GENERAL REMARKS:___________________________________________________________________________ | |
SUBMITTED BY, DATE | CHECKED AND APPROVED, DATE |
______________________________ | ______________________________ |
LABORATORY CHIEF Affiliation______________________ | Affiliation______________________ |
<< Previous | Contents | Next >> |