Long Term Pavement Performance Project Laboratory Materials Testing and Handling Guide

Protocol H12L
Determination of Slurry System Compatibility (SC08)

This LTPP protocol covers the compatibility of a slurry seal system. It is intended for use on the slurry seal to be used as part of the SPS-3 studies. The test is to be performed in accordance with ISSA TB-115 - Revised January 1990. The Mix and Workability Test is not required. The Wet Stripping Test is performed in LTPP Test Designation SC07 and need not be repeated as a part of this test.

The results will be recorded on LTPP Test Sheet H12.

LTPP LABORATORY MATERIAL HANDLING AND TESTING
LABORATORY MATERIAL TEST DATA
DETERMINATION OF SLURRY SYSTEM COMPATIBILITY
LAB DATA SHEET H12

SLURRY SEAL PROPERTIES
LTPP TEST DESIGNATION SC08/LTPP PROTOCOL H12L

LABORATORY PERFORMING TEST: _____________________________________________________________

LABORATORY IDENTIFICATION CODE: ___ ___ ___ ___

REGION: _________________________ STATE: STATE CODE: __ __

EXPERIMENT NO: _____ SHRP ID: __ __ __ __

SAMPLED BY: _________________________________________ FIELD SET NO: ___

DATE SAMPLED: __ __ - __ __ - __ __ __ __ SAMPLING AREA NO: SA- ____

1. LAYER NUMBER ___

2. LABORATORY TEST NUMBER __

3. LOCATION NUMBER __ __ __

4. LTPP SAMPLE NUMBER __ __ __ __

5. TEST RESULTS

      (a) CONSISTENCY __ TACKY __ SATISFACTORY

      (b) SPLIT CONSISTENCY ASPHALT AND AGGREGATE DISTRIBUTION __ UNIFORM __ NONUNIFORM

SURFACE OF SPECIMEN __ TACKY __ SATISFACTORY

      (c) REFEREE CUP, % AC Difference __ __

6. COMMENTS

      (a) CODE ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___

      (b) NOTE _______________________________________________________

7. TEST DATE __ __ - __ __ - __ __ __ __