U.S. Department of Transportation
Federal Highway Administration
1200 New Jersey Avenue, SE
Washington, DC 20590
202-366-4000
Federal Highway Administration Research and Technology
Coordinating, Developing, and Delivering Highway Transportation Innovations
| REPORT |
| This report is an archived publication and may contain dated technical, contact, and link information |
|
 |
| Publication Number: FHWA-HRT-12-044 Date: November 2012 |
Publication Number: FHWA-HRT-12-044 Date: November 2012 |
Kogler, B. (2008). “Managing the Infrastructure: The Role of Cost Knowledge,” Journal of Protective Coatings and Linings, 22–31.
Kline, E.S. (2008). “Steel Bridges: Corrosion Protection for 100 Years,” Journal of Protective Coatings and Linings, 20–31.
Appleman, B.R. and Kline, E.S. (2003). Analysis of Cost for Shop Painting of Bridge, KTA-Tator Report to FHWA.
Chong, S.L. and Yao, Y. (2000). Laboratory and Test-Site Testing of Moisture-Cured Urethanes on Steel in Salt-rich Environment, Report No. FHWA-RD-00-156, Federal Highway Administration, Washington, DC.
Chong, S.L. and Yao, Y. (2006). “Performance of Testing of Two-Coat Zinc-Rich Systems on Steel Bridges,” Journal of Protective Coatings and Linings, 72–83.
Lee, S.K., Chong, S.L., and Yao, Y. (2006). Performance Evaluation of Bridge Overcoating Materials Using Electrochemical Impedance Spectroscopy, Proceedings of Paint and Coatings Expo, Tampa, FL.
Chong, S.L. and Yao, Y. (2006). “Selecting Overcoats For Bridges,” Public Roads, 71(2).
Lee, S.K., Kogler, B., and Yao, Y. (2010). Outdoor Performance of One-Coat Systems Applicable to New Steel Bridges, Proceeding of Paint and Coatings Expo, Phoenix, AZ.
Chong, S.L. and Yao, Y. (2006). “Are Two Coat as Effective as Three?,” Public Roads, 70(2).
Society for Protective Coatings. (2007). Joint Surface Preparation Standard SSPC-SP5/NACE No.1: White Metal Blast Cleaning, Pittsburgh, PA.
ASTM D1654-08. (2008). “Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments,” ASTM Book of Standards Volume 06.01, ASTM International, West Conshohocken, PA.
ASTM G85-11. (2011). “Standard Practice for Modified Salt Spray (Fog) Testing,” ASTM Book of Standards Volume 06.01, ASTM International, West Conshohocken, PA.
Society for Protective Coatings. (2009). SSPC-PA2: Measurement of Dry Coat Thickness with Magnetic Gages, Pittsburgh, PA.
Nadal, M.E. (2001). “NIST Reference Goniophotometer for Specular Gloss Measurements,” Journal of Coatings Technology, 73(917), 73–80.
ASTM D523-08. (2008). “Standard Test Method for Specular Gloss,” ASTM Book of Standards Volume 06.01, ASTM International, West Conshohocken, PA.
ASTM D2244-05. (2005). “Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates,” ASTM Book of Standards Volume 06.01, ASTM International, West Conshohocken, PA.
ASTM D4541-09e1. (2009). “Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers,” ASTM Book of Standards Volume 06.02, ASTM International, West Conshohocken, PA.
ASTM G62-07. (2009). “Standard Test Methods for Holiday Detection in Pipeline Coatings (Method A),” ASTM Book of Standards Volume 06.02, ASTM International, West Conshohocken, PA.
ASTM D714-02. (2009). “Standard Test Method for Evaluating Degree of Blistering of Paints,” ASTM Book of Standards Volume 06.01, ASTM International, West Conshohocken, PA.
ASTM D610-01. (2009).“Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces,” ASTM Book of Standards Volume 06.01, ASTM International, West Conshohocken, PA.
ASTM D7087-05a. (2005). “Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments,” ASTM Book of Standards Volume 06.01, ASTM International, West Conshohocken, PA.
Yao, Y., Kodumuri, P., and Lee, S.K. (2011). Performance Evaluation of One-Coat Systems for New Steel Bridges, FHWA Report No. FHWA-HRT-11-046, Federal Highway Administration, Washington, DC.
