|
|
PBES Innovative Projects
SH 249/Louetta Road Overpass |
| Location | Houston |
| State | TX |
| Completion Date | 1994 |
| Contact Person | Mary Lou Ralls P.E. State Bridge Engineer Bridge Division Texas Department of Transportation 125 E. 11th Street Austin TX 78701-2483 Phone: (512) 416-2183 Fax: (512) 416-3144 Email: mralls@dot.state.tx.us |
| Description | In the early 1990's Texas State Highway 249 was upgraded from a four-lane, at-grade road to a limited-access freeway. Consequently, two overpass structures were built at Louetta Road to carry three lanes in each direction, plus shoulders and ramp transitions. The superstructure consists of simple-span pretensioned trapezoidal-shaped 54-inch U-beams as well as precast pretensioned deck panels supported on the U-beams' top flanges with a cast-in-place composite concrete topping. The bridges are three spans each, nominally 130 ft. per span. At the interior bents, each beam is supported by a single post-tensioned pier. All beams and piers were designed and fabricated using high-performance/high-strength concrete. |
| Photo |  |
| Prefabricated Elements | Total substructure systems; decks |
| Other Keywords | Precast pretensioned partial-depth deck panels, precast post-tensioned piers, pretensioned U-beams,precast prestressed U-beams |
| Advantages | Minimized traffic disruption |
| Photo Credits | Texas Department of Transportation |
|
Events
More Information
Contact
Reggie Holt
Office of Bridge Technology
202-366-4596
E-mail Reggie
|
| |
This page last modified on 05/12/08 | |