U.S. Department of Transportation
Federal Highway Administration
1200 New Jersey Avenue, SE
Washington, DC 20590
202-366-4000


Skip to content
Facebook iconYouTube iconTwitter iconFlickr iconLinkedInInstagram

Federal Highway Administration Research and Technology
Coordinating, Developing, and Delivering Highway Transportation Innovations

Report
This report is an archived publication and may contain dated technical, contact, and link information
Publication Number: FHWA-RD-01-163
Date: March 2002

Guidelines for Detection, Analysis, and Treatment of Materials-Related Distress in Concrete Pavements

Previous | Table of Contents | Next

References

Abdun-Nur, E. A. (1970). Sampling of Concrete in Service.  Special Report 106.  Highway Research Board. Washington, DC. pp.13-17.

Abdun-Nur, E. A. and T. S. Poole (1994).  "Techniques, Procedures, and Practices of Sampling of Concrete and Concrete-Making Materials." Significance of Tests and Properties of Concrete and Concrete-Making Materials. STP 169C. American Society for Testing and Materials, Philadelphia, PA. pp.15-22.

American Association of State Highway and Transportation Officials (AASHTO) (2000). "Proposed AASHTO Guide Specification for Highway Construction – Section 56X: Portland Cement Concrete Resistant to Excessive Expansion Caused by Alkali–Silica Reaction." Developed and Submitted by the AASHTO Lead State Team on ASR. http://leadstates.tamu.edu/ASR/library/gspec.stm.  Accessed July 30, 2000.

American Concrete Institute (ACI) (1981). ACI Manual of Concrete Inspection. Sixth Edition.  American Concrete Institute,Detroit, MI.

American Concrete Institute (ACI) (1987). "Ground Granulated Blast-Furnace Slag as a Cementitious Constituent in Concrete." ACI Manual Practice—Part 1. ACI 226.1R-87. American Concrete Institute, Farmington Hills, MI.

American Concrete Institute (ACI) (1989). "Corrosion of Metals in Concrete." ACI Manual of Concrete Practice—Part 1. ACI222R-89. American Concrete Institute, Farmington Hills, MI.

American Concrete Institute (ACI) (1991). "Standard Practice for Selecting Proportions for Normal, Heavyweight, and Mass Concrete." ACI Manual of Concrete Practice—Part 1. ACI 211.1-91. American Concrete Institute, Farmington Hills, MI.

American Concrete Institute (ACI) (1992a). "Guide to Durable Concrete."  ACI Manual of Concrete Practice—Part 1.ACI 201.2R-92. American Concrete Institute, Farmington Hills, MI.

American Concrete Institute (ACI) (1992b). "Guide to Making a Condition Survey of Concrete in Service." ACI Manual of Concrete Practice—Part 1. ACI201.1R-92. ISSN 0065-7875. American Concrete Institute, Farmington Hills, MI.

American Concrete Institute (ACI) (1998). "State-of-the-Art Report on Alkali-Aggregate Reactivity." ACI Manual of Concrete Practice—Part 1. ACI 221.1R-98. American Concrete Institute, Farmington Hills, MI.

American Concrete Pavement Association (ACPA) (1992). Scale-Resistance Concrete Pavements. IS117.02P. American Concrete Pavement Association, Skokie, IL.

American Concrete Pavement Association (ACPA) (1993). Concrete Durability: A Slide Presentation. American Concrete Pavement Association, Skokie, IL.

American Concrete Pavement Association (ACPA) (1995). Guide Specification for Concrete Subject to Alkali-Silica Reactions. Concrete Information. Developed by Alkali-Silica Reactivity/ Pavement Durability Task Group. American Concrete Pavement Association, Skokie, IL. November.

American Railway Engineering Association (AREA) (1996). "Duggan Concrete Expansion Test." AREA Manual of Railway Engineering. American Railway Engineering Association. p. 10-12.

American Society for Testing and Materials (ASTM)(1948).  "Usefulness and Limitations of Samples." Proceedings.  Vol. 48. American Society for Testing and Materials, Philadelphia, PA.

American Society for Testing and Materials (ASTM)(1973).  Sampling, Standards and Homogeneity.  ASTM STP 540.  American Society for Testing and Materials, Philadelphia, PA.

American Society for Testing and Materials (ASTM) (1975).  "Acceptance Sampling." ASTM Standardization News.  American Society for Testing and Materials, Philadelphia, PA.

American Society for Testing and Materials (ASTM) (1990). Petrography Applied to Concrete and Concrete Aggregates. Erlin and Stark, Ed. STP 1061.207 pp.

Attiogbe, E. K., J. A. Wells, and S. H. Rizkalla (1990). Evaluation of Duggan Concrete Core Expansion Test. Canadian National Railways and Transport Institute, University of Manitoba.

Attiogbe, E. K., C. K. Nmai, and F. T. Gay (1993). "Air-Void System Parameters and Freeze-Thaw Durability of Concrete Containing Superplasticizers." Durable Concrete. ACI Compilation No.24. American Concrete Institute, Farmington Hills, MI. pp. 41-45.

Bakker, R. F. M. (1983). "Permeability of Blended Cement Concretes." Fly Ash, Silica Fume, Slag & Other Mineral By-Products in Concrete, Volume I.  SP-79. American Concrete Institute, Farmington Hills, MI. Pp. 589-605.

Basheer, P. A. M., A. E. Long, and F. R. Montgomery (1994)."An Interaction Model for Causes of Deterioration and Permeability of Concrete.” Concrete Technology Past, Present, and Future. V. M. Mohan Malhotra Symposium. ACI. SP-144. American Concrete Institute, Farmington Hills, MI. Pp. 213-231.

Bergstrom, T. B., and H. M. Jennings (1992). "On the Formation of Bonds in Tricalcium Silicate Pastes as Observed by Scanning Electron Microscopy." Journal of Materials Science Letters 11. Pp. 1620-1622.

Berra, M., and G. Baronio (1987). "Thaumasite in Deteriorated Concretes in the Presence of Sulfates." Concrete Durability. J.M. Scanlon, Ed. Katherine and Bryant Mather International Conference. ACI SP-100. Pp. 2073-2089.

Bérubé, M.A., and J. Duchesne (1992). "Evaluation of Testing Methods Used for Assessing the Effectiveness of Mineral Admixtures in Suppressing Expansion Due to Alkali-Aggregate Reaction." Fly Ash,Silica Fume, and Natural Pozzolans in Concrete. V. M. Malhotra, Ed.  Proceedings, Fourth International Conference. ACI SP-132. Pp. 549-575.

Bicking, C. A. (1964). "Bibliography on Sampling of Raw Materials and Products in Bulk." Technical Association of the Pulp and Paper Industry. Vol. 47, No. 5. 

Bicking, C. A. (1965). "The Sampling of Bulk Materials." ASTM Materials Research and Standards.  American Society for Testing and Materials, Philadelphia, PA.

Bickley, J. A., and R. T. Hemmings, R. D. Hooton, and J.Balinski (1994). "Thaumasite Related Deterioration of Concrete Structures." Concrete Technology Past,Present, and Future. V.M. Mohan Malhotra Symposium. ACI. SP-144. Pp. 159-175.

Bilodeau, A., G. G. Carette, V. M. Malhotra, and W. S.Langley (1991). "Influence of Curing and Drying on Salt Scaling Resistance of Fly Ash Concrete." Durability of Concrete. Second International Conference, Montreal, Canada. Volume I.ACI. SP-126. Pp. 201-228.

Bilodeau, A., and V. M. Malhotra (1992). "Concrete Incorporating High Volumes of ASTM Class F Fly Ashes: Mechanical Properties and Resistance to Deicing Salt Scaling and to Chloride-Ion Penetration." Fly Ash, Silica Fume, and Natural Pozzolans in Concrete. V.M. Malhotra, Ed. Proceedings, Fourth International Conference. ACI SP-132. pp. 319-349.

Bollmann, K., and J. Stark (1996). Ettringite Formation in Hardened Concrete and Freeze-Deicing Salt Resistance. Wissenschaftliche Zeitschrift. Bauhaus Universitaet Weimar,Germany.

Buck, A. D. (1985). A Discussion of the Paper " The Penetration of Chlorides into Hardened Cement Pastes" by H.D. Midgley and J. M. Illston. Cement and Concrete Research. Vol. 15. No. 5. pp. 933-934.

Byfors, K. (1987). "Influence of Silica Fume and Fly Ash on Chloride Diffusion and pH Values in Cement Paste." Cement and Concrete Research.  Vol. 17. No. 1. pp. 115-129.

Campbell-Allen, D., and H. Roper (1991). Concrete Structures: Materials, Maintenance and Repair. Longman Scientific & Technical. Essex, England.

Campbell, D. H. (1985) Microscopical Examination & Interpretation of Portland Cement & Clinker.  2nd Edition, Portland Cement Association, 224 p.

Cement and Concrete Association of Australia (CCAA) (1996). Alkali Aggregate Reaction: Guidelines on Minimizing the Risk of Damage to Concrete Structures in Australia. Cement and Concrete Association of Australia and Standards Australia. C&CAA T47. ISBN 0 73370469.

Chatterji, S. K. (1969). "Mechanisms of Sulphate Expansion of Hardened Cement Pastes." Proceedings of the Fifth International Symposium on the Chemistry of Cement. Part III, Hydration of Cements. Vol. III.December. Pp. 336-341.

Civil Engineering News (1997). "Researchers Develop New Test To Detect Concrete Flaws." Civil Engineering News. May. p. 49.

Cochran, W. G. (1963). Sampling Techniques.  Second Edition. Wiley and Sons, New York,NY.

Collepardi, M., L. Coppola, and C. Pistolesi (1994). "Durability of Concrete Structures Exposed to CaClBased Deicing Salts." Durability of Concrete. V.M. Malhotra Ed. Third International Conference, Nice, France. ACI SP-145. pp.107-120.

Collins, R. J., and P. D. Bareham (1987). "Alkali-Silica Reaction: Suppression of Expansion Using Porous Aggregate." Cement and Concrete Research. Vol. 17. No. 1. pp. 89-96.

Crammond, N. J (1985). "Thaumasite in Failed Cement Mortar and Renders From Exposed Brickwork."Cement and Concrete Research. Vol. 15. No. 6. pp. 1039-1050.

Crammond, N. J., and M. A. Halliwell (1995). "The Thaumasite Form of Sulfate Attack in Concrete Containing a Source of Carbonate Ions - A Microstructural Overview." Advancesin Concrete Technology. V. M. Malhotra, Ed. Proceedings, Second CANMET/ACI International Symposium, Las Vegas, Nevada, USA. pp.357-381.

Day, R. L. (1992). The Effect of Secondary Ettringite Formation on the Durability of Concrete: A Literature Analysis. Research and Development Bulletin RD108T. Portland Cement Association, Skokie, IL.

Dempsey, B. J. (1969). A Heat-Transfer Model for Evaluating Frost Action and Temperature Effects in Multilayered Pavement Systems. Ph.D. Dissertation. University of Illinois, Department of Civil Engineering,Urbana, IL.

DePuy, G. W. (1994). "Chemical Resistance of Concrete." Significance of Tests and Properties of Concrete and Concrete-Making Materials. STP 169C. Publication No. 04-169030-07. American Society for Testing and Materials, Philadelphia, PA. pp. 263-281.

Detwiler, R. J., C. A. Fapohunda, and J. Natale. (1994)."Use of Supplementary Cementing Materials to Increase the Resistance to Chloride Penetration of Concretes Cured at Elevated Temperatures." ACI Materials Journal. Vol. 91. No. 1. January-February. Pp. 63-66.

Detwiler, R. J. (1997). The Role of Fly Ash Composition in Reducing Alkali-Silica Reaction. R&D Serial No. 2092. Portland Cement Association, Skokie, IL.

Detwiler, R. J., and L. J. Powers-Couche (1999). "Effect of Sulfates in Concrete on Their Resistance to Freezing and Thawing." Ettringite– The Sometimes Host of Destruction. SP-177. American Concrete Institute,Farmington Hills, MI. Pp. 219-248.

Dewey, G. R., L. L. Sutter, and J. F. Sandell (1996). "Reactivity Based Approach for Classifying Fly Ash." The Proceedings of the American Power Conference. Chicago, IL. April.

Diamond, S. (1996). "Delayed Ettringite Formation–Microstructural Studies of Occurrences in Steam Cured and Non-Steam Cured Concretes." Proceedings: 18th International Conference on Cement Microscopy. Houston, TX. April 21-25.

Diamond, S. (1997). "Scanning Electron Microscopy/Backscatter Mode Image Analysis - And Real Concrete!" Euroseminar on Microscopy Applied to Building Materials. Proceedings of a Symposium held in Reykjavik,Iceland. June. Pp. 343-349.

Dolar-Mantuani, L. (1976). "Petrographic Investigation of Alkali-Reactive Silicate Rocks in Several Structures."The Effect of Alkalis on the Properties of Concrete. Proceedings of a Symposium held in London. September. Pp. 203-217.

Dolar-Mantuani, L. (1982). Handbook of Concrete Aggregates: A Petrographic and Technological Evaluation. Noyes Publications, Park Ridge, NJ.

Dubberke, W. (1993). The Cause of Early Deterioration on Highway 520 in Webster County, Iowa. An unsolicited opinion. February.

Duncan, A. J. (1967). "Contributions of ASTM to the Statistical Aspects of the Sampling of Bulk Materials." ASTM Materials Research and Standards.  American Society for Testing and Materials, Philadelphia, PA.

Dunstan, E. R. (1980). "Possible Method of Identifying Fly Ashes That Will Improve Sulfate Resistance." Cement, Concrete, and Aggregates. Vol. 2, No. 1. American Society of Testing and Materials,Philadelphia, PA.

Dunstan, E. R. (1987). "Sulfate Resistance of Fly Ash Concrete—The R-Value." Concrete Durability. Katherine and Bryant Mather International Conference, Vol. 2. American Concrete Institute, Detroit, MI.

Ellis, W. E. Jr. (1993). "For Durable Concrete, Fly Ash Does Not "Replace" Cement." Durable Concrete. ACI Compilation 24. pp.17-21.

Emmons, P. H. (1994). Concrete Repair and Maintenance Illustrated. R.S. Means Company, Kingston, MA.

Engineering News Record (ENR) (1997). "Geologist Develop Simple Test for Concrete Degradation." Engineering News Record. May 19.p. 21.

Engstrom, G. M. (1994). Field Performance of High Molecular Weight Methacrylate Monomers and Silanes on a D-Cracked, Jointed Reinforced Concrete Pavement. MN/RD-94/07. Minnesota Department of Transportation, Maplewood, MN.

Erlin, B., and W. Hime (1987). "Chloride-Induced Corrosion." Corrosion, Concrete, and Chlorides. ACI. SP-102. Pp. 155-158.

Erlin, B. (1993). "Petrographic Examination." Significance of Tests and Properties of Concrete and Concrete-Making Materials, STP-169C. American Society for Testing and Materials, Philadelphia, PA, pp. 210-218.

Erlin, B. (1996a). Memorandum to Steve Forster Considering Nomenclature for Internal Sulfate Attack. The Erlin Company, April 16.

Erlin, B. (1996b). "Ettringite–Whatever You May Think It Is." Proceedings: 18th International Conference on Cement Microscopy. Houston, TX. April 21-25.

Farny, James A., and Steven H. Kosmatka (1997). Diagnosis and Control of Alkali-Aggregate Reactions in Concrete. Concrete Information Series No. IS413.01T. Portland Cement Association. Skokie, IL. ISBN 0 89312 146 0. 24 pp.

Feldman, R. F., G. W. Chan, R. J. Brousseau, and P. J.Tumidajski (1994). "Investigation of the Rapid Chloride Permeability Test." ACI Materials Journal. Vol. 91. No. 2. May-June. Pp. 246-255.

Federal Highway Administration (FHWA) (1997). Life Cycle Cost Analysis in Pavement Design. Pavement Division Technical Bulletin. Federal Highway Administration, Washington, DC.

Federal Highway Administration (FHWA) (1998). Techniques for Pavement Rehabilitation. Sixth Edition. Training Course Prepared for the National Highway Institute, Federal Highway Administration, Washington, DC.

Florida Department of Transportation (FDOT) (1996).  Rigid Pavement Condition Survey Handbook.  State Materials Office, Florida Department of Transportation, Gainesville, FL.

Fournier, B., W. S. Langley, and V. M. Malhotra (1996). "Effectiveness of Fly Ash in Reducing Expansion of Concrete Made with Reactive Aggregates from New Brunswick, Canada."Fly Ash, Silica Fume, Slag, and Natural Pozzolans in Concrete. V. M.Malhotra, Ed. Proceedings: Fifth International Conference, ACI. SP-153. Milwaukee, WI. pp. 561-590.

Fournier, B., M. Bérubé, and C. A. Rodgers (1999). "Proposed Guidelines for the Prevention of Alkali–Silica Reaction in New Concrete Structures." Transportation Research Record 1668: Concrete in Pavements and Structures. Transportation Research Board, Washington, DC. pp. 48-59.

Fraczek, J. (1987). "A Review of Electrochemical Principles as Applied to Corrosion of Steel in a Concrete or Grout." Corrosion, Concrete, and Chlorides. ACI.SP-102. Pp. 13-24.

Freeman, R. B., and R. L. Carrasquillo (1996). "Production of Sulfate-Resistant Concrete Containing High-Calcium Fly Ash and Sodium Sulfate Admixture." Fly Ash, Silica Fume, Slag, and Natural Pozzolans in Concrete. V. M. Malhotra,Ed. Proceedings: Fifth International Conference. ACI. SP-153. Milwaukee, WI.pp. 153-175.

French, W. J. (1991). "Concrete Petrography: A Review." The Quarterly Journal of Engineering Geology. Vol. 24, No. 1. pp. 17-48.

Gajda, J. (1996). Development of Cement to Inhibit Alkali-Silica Reactivity. Portland Cement Association. ISBN: 0-89312-141-X.

Gebler, S. H., and P. Klieger (1986). Effect of Fly Ashon the Durability of Air-Entrained Concrete. Research and Development Bulletin RD090.01T. Portland Cement Association, Skokie, IL.

Ghafoori, N., and R. P. Mathis (1997). "Scaling Resistance of Concrete Paving Block Surface Exposed to Deicing Chemicals." ACI Materials Journal. Vol. 94, No. 1. January-February. Pp. 32-38.

Gillott, J. E. (1995). "Review of Expansive Alkali-Aggregate Reactions in Concrete." Journal of Materials in Civil Engineering. November. Pp. 278-282.

Goldstein, J.I., D.E. Newbury, P. Echlin, D.C. Joy, A.D.Romig Jr., C.E. Lyman, C. Fiori, and E. Lifshin (1992). Scanning Electron Microscopy and X-Ray Microanalysis :  A Text for Biologists, Materials Scientists and Geologists, 2nd Edition, Plenum Press, New York, 1992, 820p.

Gowripalan, N., J. G. Cabrera, A. R. Cusens, and P. J.Wainwright (1993). "Effect of Curingon Durability." Durable Concrete. ACICompilation 24. Pp. 47-54.

Gress, D. (1997).  Early Distress in Concrete Pavements.  FHWA-SA-97-045, Federal Highway Administration, Washington, DC. January. 53 pp.

Gunter, M., T. Bier, and H. Hilsdorf (1987). "Effect of Curing and Type of Cement on The Resistance of Concrete to Freezing in Deicing Salt Solutions." Concrete Durability. ACI. SP-100-49. Pp. 877-899.

Guthrie, G. G. Jr., and J. W. Carey (1997). "A Simple Environmentally Friendly, and Chemically Specific Method for the Identification and Evaluation of the Alkali-Silica Reaction." Cement and Concrete Research. Vol. 27, No. 9. pp. 1407-1417.

Gutmann, P. F. (1988). "Bubble Characteristics as They Pertain to Compressive Strength and Freeze-Thaw Durability." Material Research Society Symposium Proceedings: Volume 114. Materials Research Society. Pp. 271-277.

Hagen, M. G., and G. R. Cochran (1995). Comparison of Drainage Systems. MN/RD-95/28. Minnesota Department of Transportation, St. Paul, MN.

Hansen, W. C. (1963). "Crystal Growth as a Source of Expansion in Portland-Cement Concrete." Proceedings, American Society for Testing and Materials. Vol. 63. pp. 932-945.

Harnik, A. B., U. Meier, and A. R. Ŝli (1980). "Combined Influence of Freezing and Deicing Salt on Concrete - Physical Aspects." ASTM STP 691. American Society for Testing and Materials. Pp. 474-484.

Harrisson, A., and S. Varma, and N. Winter (1987). Alkali-Silica Gel Formation at an Early Age Through Solution. Concrete Durability. Katherine and Bryant Mather International Conference. ACI SP-100. American Concrete Institute, Detroit, MI.pp. 1743-1757.

Hartmann, C., and E. Mangotich (1987). "A Method for Predicting Sulfate Durability of Concrete." Concrete Durability. J. M. Scanlon, Ed. Katherine and Bryant Mather International Conference. ACI SP-100. American Concrete Institute, Detroit, MI. Pp. 2134-2151.

Helmuth, R. (1993).  Alkali–Silica Reactivity: An Overview of Research.  SHRP-C-342, Strategic Highway Research Program, Washington, DC. 105 pp.

Highway Research Board (HRB) (1957).  Pavement Condition Surveys—Suggested Criteria.  Special Report 30.  Highway Research Board, Washington, DC.

Highway Research Board (HRB) (1970).  Standard Nomenclature and Definitions for Pavement Components and Deficiencies.  Special Report 113.  Highway Research Board,Washington, DC.

Hime, W. G. (1996). "Delayed Ettringite Formation." Proceedings:18th International Conference on Cement Microscopy. Houston, TX. April 21-25.

Hognestad, E. (1993). "Design Considerations for Service Life." Durable Concrete.ACI Compilation 24. Pp. 7-10..

Hover, K. C. (1993), "Air Content and Unit Weight of Hardened Concrete," Significance of Tests and Properties of Concrete and Concrete-Making Materials, STP-169C.American Society for Testing and Materials, Philadelphia, PA. pp. 301-302.

Hughes, D. C. (1985). "Sulphate Resistance of OPC, OPC/Fly Ash and SRPC Pastes: Pore Structure and Permeability." Cement and Concrete Research. Vol. 15. No. 6. pp. 1003-1011.

Hveem, F. N.  (1958)."Types and Causes of Failure in Highway Pavements." Pavement Performance—Methods for Evaluation.  HRB Bulletin 187.  Highway Research Board, Washington, DC.

Jakobsen U. H., P. Laugesen, N. Thaulow (2000)."Determination of Water-Cement Ratio in Hardened Concrete by Optical Fluorescence Microscopy," A CI International Special Proceedings. No. 191. pp. 27-41.

Janssen, D. J. (1985). The Effect of Asphalt Concrete Overlays on the Progression of Durability Cracking in Portland Cement Concrete. Ph.D. Dissertation. University of Illinois, Urbana, IL.

Janssen, D. J., B. J. Dempsey, J. B. DuBose, and A. J. Patel (1986). Predicting the Progression of D-Cracking. FHWA/IL/UI-211.University of Illinois, Urbana, IL.

Janssen, D. J., and M. B. Snyder (1994). Resistance of Concrete to Freezing and Thawing. SHRP-C-391. Strategic Highway Research Program, Washington, DC.

Jennings, H. M. (1988). "Design of High Strength Cement Based Materials: Part 1 Fracture Mechanics." Materials Science And Technology. Vol. 4. ISSN0267-0836.

Johansen, V., N. Thaulow, and J. Skalny (1993). "Simultaneous Presence of Alkali-Silica Geland Ettringite in Concrete." Advances in Cement Research. No. 17. January.  Pp. 23-29.

Johansen, V., and N. Thaulow (1999). "Heat Curing and Late Formation of Ettringite." Ettringite – The Sometimes Host of Destruction. SP-177. American Concrete Institute, Farmington Hills, MI. Pp. 47-64.

Johnston, C. (1987) "Effects of Microsilica and Class C Fly Ashon Resistance of Concrete to Rapid Freezing and Thawing and Scaling in the Prescence of Deicing Agents." Concrete Durability. J.M. Scanlon, Ed. Katherine and Bryant Mather International Conference. ACI SP-100. pp.1183-1203.

Johnston, D. (1997). Mitigation of Potential Alkali-Silica Reactivity Using Lithium (SHRP Concrete and Structures ASR Showcase Test and Evaluation Project 34). SD95-21-F.  South Dakota Department of Transportation. May. Pierre, SD.

Kaneuji, M., D. N. Winslow, and W. L. Dolch (1980). "The Relationship Between an Aggregate’s Pore Size Distribution and Its Freeze Thaw Durability in Concrete." Cement and Concrete Research. Vol. 10.No. 3. pp. 433-441.

Keck, R. H., and E. H. Riggs (1997). "Specifying Fly Ash for Durable Concrete." Concrete International. Vol. 19. No. 4. April. pp.35-38.         

Kjellsen , K. O., (1996). "Preparation of Flat-Polished Specimens of High-Performance Concrete for SEM: Backscattered, Electron Imaging and Microanalysis." The Proceedings of the Eighteenth International Conference on Cement Microscopy.Houston, TX. April 21-25. PP 356-364.

Klemm, W. A., and F. M. Miller (1997). Internal Sulfate Attack: A Distress Mechanism at Ambient and Elevated Temperatures? PCAR&D Serial No. 2125. Portland Cement Association, Skokie, IL.

Klieger, P., and S. Gebler (1987). "Fly Ash and Concrete Durability." Concrete Durability.ACI. SP-100-56. Pp. 1043-1069.

Lange, D. A., K. Sujata, and H. M. Jennings (1991),"Observations of Wet Cement Using Electron Microscopy." Ultramicroscopy.Vol. 37. Elsevier Science Publishers B. V. (North-Holland).  pp. 234-238.

Larson, T. D., and P. D. Cady (1969). Identification of Frost-Susceptible Particles in Concrete Aggregate. Report No. 66. National Highway Research Program, Transportation Research Board, Washington, DC.

Leek, D. S., A. M. Harper, and C. R. Ecob (1995). "Specification and Production of Durable Reinforced Concrete." Transportation Research Record  No.1478. Transportation Research Board, Washington, DC.

Leger, P., R. Tinawi, and N. Mounzer (1995).  "Numerical Simulation of Concrete Expansion in Concrete Dams Affected by Alkali-Aggregate Reaction: State of the Art." Canadian Journal of Civil Engineering. Vol. 22. pp. 692-713.

Leming, M. L. (1996). "Alkali–Silica Reactivity: Mechanisms and Management." Mining Engineering. Vol. 48. No. 12. pp. 61-64.

Malek, R. I. A., and D. M. Roy (1988).  "The Permeability of Chloride Ions in Fly Ash-Cement Pastes, Mortars and Concrete." Material Research Society Symposium Proceedings: Volume 114. Materials Research Society, pp. 325-335.

Malhotra, V. M., G. C. Carette, A. Bilodeau, and V.Sivasundaram (1991). "Some Aspects of Durability of High-Volume ASTM Class F(Low Calcium) Fly Ash Concrete." Durability of Concrete. Second International Conference, Montreal, Canada. Volume I. ACI. SP-126. pp. 65-82.

Mangat, P. S., and J. M. Khatib (1995). "Influence of Fly Ash, Silica Fume, and Slagon Sulfate Resistance of Concrete." ACI Materials Journal. Vol.92. No. 5. September-October. Pp. 542-552.

Marchand, J., E. J. Sellevold, and M. Pigeon (1994). "TheDeicer Salt Scaling Deterioration of Concrete - An Overview." Durability of Concrete. V. M. Malhotra, Ed. Third International Conference, Nice,France. ACI SP-145. Pp. 1-46. 

Marks, V. J., and W. Dubberke (1982). "Durability of Concrete and the Iowa Pore Index Test." Transportation Research Record. No. 853. pp. 25-30.

Marks, V. J., and W. G. Dubberke (1995). A Different Perspective for Investigation of PCC Pavement Deterioration. Interim Report. Research Project HR-2074. Iowa Department of Transportation, Ames, IA.

Marusin, S. L. (1998). "Morphology of Delayed Ettringite Formation (DEF) as Observed and Identified by a Scanning Electron Microscope (SEM)." The Proceedings of the Twentieth International Conference on Cement Microscopy. Guadalajara, Mexico. April 19-23. PP 55-76.

Mayfield B.(1990). "The quantitative evaluation of the water/cement ratio using fluorescence microscopy," Magazine of Concrete Research, Vol. 42, No. 150, pp. 227-236.

McCarthy, G. J., P. J. Tikalsky, R. L. Carrasquillo, O. E.Manz, and A. Thedchanamorthy (1989). "Factors Affecting the Ability of a Fly Ashto Contribute to the Sulfate Resistance of Fly Ash Concrete." Materials Research Society Symposium Proceedings, Volume 136. Materials Research Society. Pp. 273-274.

Mehta, P. K. (1991). "Durability of Concrete - Fifty Years of Progress?" Durability of Concrete. Second International Conference, Montreal, Canada. Volume I. ACI. SP-126. pp.1-31.

Mehta, P. K. and P. J. M. Monteiro (1993). Concrete:Structure, Properties, and Materials. Second Edition. Prentice Hall,Englewoods Cliffs, NJ.

Mehta, P. K. (1997). "Durability—Critical Issues for the Future." Concrete International. Vol. 19, No. 7.July.  Pp. 27-33.

Mielenz, R. C. (1962). "Petrography Applied to Portland-Cement Concrete." Reviews in Engineering Geology. Vol. 1. The Geological Society of America. Pp. 1-38.

Mielenz, R.C. (1964). "Reactions of Aggregate Involving Solubility, Oxidation, Sulfates or Sulfides." Highway Research Record. No. 43. Highway Research Board, National Research Council, Washington, DC.pp.8-18.

Mielenz, R. C., S. L. Marusin, W. G. Hime, and Z. T. Jugovic (1995). "Investigation of Prestressed Concrete Railroad Tie Distress." Concrete International. Vol. 17.No. 12. December.

Mindess, S., and J. F. Young (1981). Concrete. Prentice-Hall, Inc., Englewood Cliffs, NJ. 671 pp.

Mingshu, T., D. Min, L. Xianghui, and H. Sufen (1994). "Studies on Alkali-Carbonate Reaction."ACI Materials Journal. Vol. 91. No. 1. January-February. Pp. 26-29.

Misra, S., A. Yamamoto, T. Tsutsumi, and K. Motohashi(1994). "Application of Rapid Chloride Permeability Test to Quality Control of Concrete." Durability of Concrete. V. M. Malhotra, Ed. Third International Conference, Nice, France. ACI SP-145. pp. 487-502.

Mobasher, B., and T. M. Mitchell (1988).  "Laboratory Experience with the Rapid Chloride Permeability Test." Permeability of Concrete. ACI. SP-108. Pp. 117-143.

Montgomery, D. A. (1985). Introduction to Statistical Quality Control.  Wiley and Sons,New York, NY.

Moss, G. M., A. W. Saak, H. M. Jennings, and D. L. Johnson (1997). Pooled Fund Study of Premature Concrete Pavement Deterioration. Draft Final Report. Department of Materials Science and Engineering, Northwestern University, Evanston, IL. January 31.

Muethel, R. W. (1997). Investigation of Calcium Hydroxide Depletion as a Cause of Concrete Pavement Deterioration. Research Report R-1353. Michigan Department of Transportation Materials and Technology Division. November.

Munoz, S. R., and E. Y. J. Chou (1994). "Durability of Concrete Materials Under Pavement Joints." Infrastructure: New Materials and Methods of Repair— Proceedings of the Third Materials Engineering Conference. ASCE, San Diego, CA, Nov 13-16. Pp. 1-7.

Munoz, S. R., and E. Y. J. Chou (1996). Identification of Durability Problems Under Concrete Pavement Joints. The University of Toledo. ODOT Project No. 14563(0). March. 125 pp.

Muszynski, L. C., J. L. LaFrenz, and D. H. Artman(1997).  "Proportioning Concrete Mixtures with Graded Aggregates." Aircraft/Pavement Technology. August. Pp. 205-216.

Natesaiyer, K., and K. C. Hover (1992).  "Cornell’s Gel Fluorescence Test Identified ASR Products in Concrete." Concrete Technology Today. Vol. 13,No. 2.  Portland Cement Association, Skokie, IL.

National Asphalt Paving Association (NAPA) (1991). Guidelines and Methodologies for the Rehabilitation of Rigid Highway Pavements Using Asphalt Concrete Overlays. National Asphalt Pavement Association, Lanham,MD.

Neville, A. M. (1996). Properties of Concrete. John Wiley and Sons, Inc., New York, New York.

Newlon, H. Jr., and T. M. Mitchell (1994). "Freezing and Thawing." Significance of Tests and Properties of Concrete and Concrete-Making Materials. STP 169C. Publication Code No. 04-169030-07. American Society for Testing and Materials, Philadelphia, PA. pp. 153-163.

Niemann, C., and V. Lehtonen (1997). "Air Voids are Filled and Frost Action Breaks Down Concrete in Field Circumstances." Euroseminaron Microscopy Applied to Building Materials. Proceedings of a Symposium held in Reykjavik, Iceland. June. Pp. 50-57.

Nixon, P., and C. Page (1987). "Pore Solution Chemistry and Alkali Aggregate Reaction." Concrete Durability. J.M.Scanlon, Ed. Katherine and Bryant Mather International Conference. ACI SP-100.pp. 1833-1863.

Ouyang C., and O. J. Lane (1997). Freeze-Thaw Durability of Concrete With Infilling of Ettringite in Voids. Final Report for Research Project MLR 94-9, Phase 2. Iowa Department of Transportation, Ames, IA.

Ouyang, C., and O. J. Lane (1999). "Effect of Infilling of Air Voids by Ettringite on Resistance of Concretes to Freezing and Thawing." Ettringite – The Sometimes Host of Destruction. SP-177.  American Concrete Institute, Farmington Hills, MI. Pp. 249-261.

Ozol, M. A. (1994). "Alkali-Carbonate Rock Reactions." Significance of Tests and Properties of Concrete and Concrete-Making Materials. STP 169C. Publication Code No. 04-169030-07. American Society for Testing and Materials, Philadelphia, PA. pp. 341-364.

Patel, H. H., and P. L. Pratt, and L. J. Parrott (1989). "Porosity in the Microstructure of Blended Cements Containing Fly Ash." Materials Research Society Symposium Proceedings. Vol. 136. Materials Research Society. Pp. 233-241.

Pennsylvania Department of Transportation (PennDOT) (1996).  Pavement Policy Manual.  Publication 242.  Pennsylvania Department of Transportation, Commonwealth of Pennsylvania, Harrisburg, PA.

Perenchio, W. F. (1994). "Corrosion of Reinforcing Steel." Significance of Tests and Properties of Concrete and Concrete-Making Materials. STP 169C.Publication Code Number 04-169030-07. American Society for Testing and Materials, Philadelphia, PA. pp. 164-172.

Peterson, D. E. (1985). Life Cycle Cost Analysis of Pavements. NCHRP Synthesis of Highway Practice 122. National Cooperative Highway Research Program, Transportation Research Board, Washington, DC.

Peterson, K. R., D. M. Hammerling,, L. L. Sutter, T. J. VanDam, and G. R. Dewey (1999). "Oldhamite: Not Just in Meteorites," Proceedings of the 21st International Conference on Cement Microscopy, Las Vegas, Nevada. pp.394-405.

Philleo, R. E. (1983). "A Method for Analyzing Void Distribution in Air-Entrained Concrete." Cement, Concrete, and Aggregates.Vol. 5, No. 2. pp. 128-130.

Pigeon, M. (1994)."Frost Resistance, A Critical Look." Concrete Technology Past,Present, and Future. V.M. Mohan Malhotra Symposium. ACI. SP-144. pp.141-157.

Pigeon, M., and R. Plateau (1995). Durability of Concretein Cold Climates. E & FN Spon. ISBN: 0-419-19260-3. 244 pp.

Pitt, J. M., M. C. Schluter, D. Lee, and W. Dubberke (1987)."Sulfate Impurities from Deicing Saltand Durability of Portland Cement Mortar." Transportation Research Record 1110. Transportation Research Board, Washington, DC. pp. 16-23.

Poole, A. B., and A. Thomas (1975).  "A Staining Technique for the Identification of Sulphates in Aggregate and Concretes." Mineralogical Magazine. Vol. 40. September. pp.315-316.

Portland Cement Association (PCA) (1992). Design and Control of Concrete Mixtures. Thirteenth Edition. Portland Cement Association, Skokie, IL.

Portland Cement Association (PCA)  (1995). "Guide Specification for Concrete Subject to Alkali-Silica Reactions." Concrete Information. PCA R&D No. 2001. IS415.05T. Portland Cement Association, Skokie, IL. November.

Portland Cement Association (PCA)  (1996). "Portland Cement: Past and Present Characteristics." Concrete Technology Today.Vol. 17. No.2. Portland Cement Association, Skokie, IL. July. Pp. 1-8.

Powers, T. C. (1945). "A Working Hypothesis for Further Studies of Frost Resistance of Concrete." Journal of the American Concrete Institute. Vol. 16.No. 4. pp. 245-272.

Powers, T. C. (1949). "The Air Requirement of Frost Resistant Concrete." Proceedings of the Highway Research Board. Vol. 29. pp. 184- 211.

Powers, T. C. (1975). "Freezing Effects in Concrete." Durability of Concrete.SP-47. American Concrete Institute. Detroit, MI.  Pp. 1-12.

Rogers, C., M. Thomas, and H. Lohse (1997). "Thaumasite From Manitoba and Ontario,Canada." Proceedings: 19th International Conference on Cement Microscopy. April 27 - May 1. Cincinnati, OH.

Roy, D. M., P. D. Cady, S. A. Sabol, and P. H. Licastro (1993a). Concrete Microstructure: Recommended Revision to Test Methods. SHRP-C-339. Strategic Highway Research Program. National Research Council,Washington DC.

Roy, D. M., and G. M Idorn (1993b), Concrete Microscopy. Publication No. SHRP-C-340. Strategic Highway Research Program, Washington, DC. August.

Russ, J. C. (1986). Practical Stereology. Plenum Press, New York, NY. 185 pp.

Russ, J. C. (1990). Computer Assisted Microscopy: The Measurement and Analysis of Images. Plenum Press, New York, NY. p. 11.

Schwartz, D. R. (1987). D-Cracking of Concrete Pavements. Synthesis of Highway Practice 134. National Cooperative Highway Research Program, Transportation Research Board, Washington, DC.

Scrivener, K. L. (1996). "Delayed Ettringite Formation and Concrete Railroad Ties." Proceedings:18th International Conference on Cement Microscopy. Houston, TX.April 21-25.

 Shahin, M. Y., and J. A. Walther (1990).  Pavement Maintenance Management for Roads and Streets Using the PAVER System. Technical Report M-90/05.  U.S.Army Engineering and Housing Support Center, Washington, DC.

Shakoor, A., and C. F. Scholer (1985). "Comparison of Aggregate Pore Characteristics as Measured by Mercury Intrusion Porosimeter and Iowa Pore Index Tests."ACI Journal. July-August. Pp. 453-458.

Shilstone, J. M. Sr. (1990). "Concrete Mixture Optimization." Concrete International, American Concrete Institute, Farmington Hills, MI. Pp. 33-39.

Skalny, J. (1996) "Let’s Stick To The Facts." Proceedings: 18th International Conference on Cement Microscopy. Houston, TX. April 21-25.

Slohim, M. J. (1960). Sampling in a Nutshell.  Simon and Schuster, New York, NY.

Smith, R. E., M. I. Darter, and S. M. Herrin (1979).  Highway Pavement Distress Identification Manual.  Interim Report.  Federal Highway Administration/National Cooperative Highway Research Program, Washington, DC.

Smith, K. D., M. J. Wade, D. G. Peshkin, L. Khazanovich, H.T. Yu, and M. I. Darter (1996). Performance of Concrete Pavements, Volume II—Evaluation of Inservice Concrete Pavements. FHWA-RD-95-110. Federal Highway Administration, Washington, DC.

St. John, D. A., A. W. Poole, and I. Sims (1998). Concrete Petrography. Arnold Publishers.  London, England. ISBN0-340-69266-9.

Stanish, K. D., R. D. Hooton, and M. D. A Thomas (2000). Testing the Chloride Penetration Resistance of Concrete: A literature Review. FHWA Contract DTFH61-97-R-00022, University of Toronto, Toronto, Ontario, Canada.(June).

Stark, D., and P. Klieger (1974). Effect of Maximum Size of Coarse Aggregate on D-Cracking in Concrete Pavements. Portland Cement Association. Reprinted from "Grading of Concrete Aggregates." Highway Research Record No. 441. Highway Research Board. 1973. Pp. 33-43.

Stark, D. (1976). Characteristics and Utilization of Coarse Aggregate Associated with D-Cracking.  Bulletin RD047.01p. Portland Cement Association, Skokie, IL.

Stark, D. (1984). Longtime Study of Concrete Durability in Sulfate Soils. Research and Development Bulletin RD086.01T. Portland Cement Association, Skokie, IL.

Stark, D. (1989). Durability of Concrete in Sulfate-Rich Soils. Research and Development Bulletin RD097, Portland Cement Association, Skokie IL. 14 pp.

Stark, D. (1991). Handbook for the Identification of Alkali-Silica Reactivity in Highway Structures. SHRP-C/FR-91-101. Strategic Highway Research Program, Washington, DC.

Stark, D., B. Morgan, and P. Okamotoa (1993).  Eliminating or Minimizing Alkali–Silica Reactivity.  SHRP-P-343.  Strategic Highway Research Program,Washington, DC. January. 49 pp.

Stark, D. (1994). "Alkali–Reactions in Concrete." Significance of Tests and Properties of Concrete and Concrete-Making Materials. ASTM STP 169C. American Society for Testing and Materials, Philadelphia, PA. pp. 365-371.

Stark, J., and H. M. Ludwig (1997). "Freeze-Thaw and Freeze-Deicing Salt Resistance of Concrete Containing Cement Rich in Granulated Blast Furnace Slag." ACI Materials Journal. Vol. 94, No. 1. January-February. Pp. 47-55.

Strategic Highway Research Program (SHRP) (1990).  Guide for Field Materials Sampling,Testing, and Handling. SHRP-LTPP-OG-006.  Strategic Highway Research Program, Washington, DC.

Strategic Highway Research Program (SHRP) (1993).  Distress Identification Manual for the Long-Term Pavement Performance Project.  SHRP-P-338.  Strategic Highway Research Program, Washington, DC.

Struble, L., and P. E. Stutzman (1989). "Epoxy Impregnation of Hardened Cement for Microstructural Characterization." Journal of Materials Science Letters. No. 8. pp. 632-634.

Sturrup, V. R., D. Hooton, and T. G. Clendenning (1983). "Durability of Fly Ash Concrete." Fly Ash, Silica Fume, Slag & Other Mineral Byproducts in Concrete—Volume I.ACI SP-79. American Concrete Institute, Detroit, MI. Pp. 71-86.

Sturrup, V., D. Hooton, P. Mukherjee, and T. Carmichael(1987). "Evaluation and Prediction of Concrete Durability - Ontario Hydo’s Experience." Concrete Durability. J. M. Scanlon, Ed. Katherine and Bryant Mather International Conference. ACISP-100. Pp. 1121-1155.

Stutzman, P. E., and J. R. Clifton (1999). "Specimen Preparation for Scanning Electron Microscopy." Proceedings of the Twenty-First International Conference on Cement Microscopy. International Cement Microscopy Association, Las Vegas, NV.April 25-29. Pp. 10-22.

Sutter, L. L., (1998). "Macro Programming with NIH Image for Implementing ASTM C 457." The Proceedings of the Twentieth International Conference on Cement Microscopy. Guadalajara, Mexico. April 19-23. Pp. 382-384.

Swamy, R. N. (1994). "Alkali-Aggregate Reaction - The Bogeyman of Concrete." Concrete Technology Past, Present, and Future. V. M.Mohan Malhotra Symposium. ACI. SP-144. pp. 105-139.

Tamimi, A. K. (1994). "The Effects of a New Mixing Technique on the Properties of the Cement Paste-Aggregate Interface for Concrete Produced by both the Conventional Mixing and a New Mixing Technique." Cement and Concrete Research. Vol.24, No. 7, pp. 1299-1304.

Tamimi, A. K. (1996). "Investigations of the Microstructural Improvement of the Cement Paste-Aggregate Interface for Concrete Produced by the Two-Stage Mixing Technique." The Proceedings of the Eighteenth International Conference on Cement Microscopy. Houston, TX. April 21-25. Pp. 317-330.

Tanner, L. and E. Deming (1949).  "Some Problems in the Sampling of Bulk Materials." Proceedings.  Vol. 49. American Society for Testing and Materials, Philadelphia, PA.

Tanner, L. (1961). "Probability Sampling Methods for Wool." ASTM Materials Research and Standards.  American Society for Testing and Materials, Philadelphia, PA.

Thaulow, N., A. D. Jensen, S. Chatterji, P. Christensen, and H. Gudmundsson (1982). "Estimation of the Compressive Strength of Concrete Samples by Means of Fluorescence Microscopy", Nordisk Betong, 2-4, p.51-52.

Thaulow, N., V. Johansen, and U. H. Jakobsen (1996a). What Causes Delayed Ettringite Formation?.Bulletin No. 60.  Presented to the Fall 1995 Meeting of the Material Research Society, Boston, MA.

Thaulow, N., U. H. Jakobsen, and B. Clark (1996b). "Composition of Alkali Silica Gel and Ettringite in Concrete Railroad Ties: SEM-EDX and X-Ray Diffraction Analysis."Cement and Concrete Research. Vol. 26. No. 2. pp. 309-318.

Thaulow, N., and U. H. Jakobsen (1997). "Deterioration of Concrete Diagnosed by Optical Microscopy." Euroseminar on Microscopy Applied to Building Materials. Proceedings of a Symposium held in Reykjavik,Iceland. June. Pp. 282-296.

Tikalsky, P. J., R. L. Carrasquillo, and P. G. Snow (1992)."Sulfate Resistance of Concrete Containing Fly Ash." Durability of Concrete. J. Holm and M.Geiker, Eds. G.M. Idorrn International Symposium. ACI. SP-131. Pp. 255-287.

Torri, K., and M. Kawamura (1992). "Pore Structure and Chloride Permeability of Concrete Containing FlyAsh, Blast Furnace Slag and Silica Fume." Fly Ash, Silica Fume, and Natural Pozzolans in Concrete.V. M. Malhotra, Ed. Proceedings, Fourth International Conference. ACI SP-132. Istanbul, Turkey, May. Pp. 135-150.

Torri, K., K. Taniguchi, and M. Kawamura (1995). "Sulfate Resistance of High Fly Ash Content Concrete".Cement and Concrete Research. Vol. 25. No. 4. pp. 759-768.

Transportation Research Board (TRB) (1999). Durability of Concrete. Transportation Research Circular. Transportation Research Board, National Academies of Science, Washington, DC.

Tsukinaga, Y., M. Shoya, R. Sugawara, and H. Nonome (1995). "Improvement in Concrete Performance and Durability Using Permeable Sheet." Advances in Concrete Technology.V.M. Malhotra, Ed. Proceedings Second CANMET/ACI International Symposium, Las Vegas, NV. pp. 279-299.

Tuthill, L. H. (1993a). "Lasting Concrete in a Sulfate Environment." Durable Concrete. ACI Compilation 24. Pp. 39-40.

Tuthill, L. H. (1993b). "Long Service Life of Concrete." Durable Concrete. ACI Compilation 24. Pp. 3-5.

United States Bureau of Reclamation (USBR) (1975).  Concrete Manual.  Eighth Edition.  U.S. Bureau of Reclamation, Washington, DC.

Van Aardt, J. H. P., and S. Visser (1985). "Influence of Alkali on the Sulphate Resistance of Ordinary Portland Cement Mortars."Cement and Concrete Research. Vol. 15. No. 3. pp. 485-494.

Van Wijk, A. J.  (1985).  Purdue Economic Analysis of Rehabilitation and Design Alternatives in Rigid Pavements, A User’s Manual for PEARDARP.  Unpublished Technical Report.  Federal Highway Administration, Washington, DC.

Verbeck, G. J., and R. Landgren (1960). "Influence of Physical Characteristics of Aggregate on the Frost Resistance of Concrete." Proceedings. American Society of Testing and Materials. Vol. 30. pp. 1063-1079.

Visman, J. (1969). "A General Sampling Theory ".ASTM Materials Research and Standards. American Society for Testing and Materials,  Philadelphia, PA.

Wade, M. J., G. D. Cuttell, J. M. Vandenbossche, H. T. Yu, K. D. Smith, and M. B. Snyder (1997). Performance of Concrete Pavements Containing Recycled Concrete Aggregate. FHWA-RD-96-164. Federal Highway Administration, McLean, VA.

Walker, H. N. (1980). "Formula for Calculating Spacing Factor for Entrained Air Voids." Cement, Concrete, and Aggregates. Vol. 2. No. 2. Winter 1980. Pp. 63-66.

Walker, H. N. (1992). Petrographic Methods of Examining Hardened Concrete: A Petrographic Manual. Report No.FHWA/VA-R14. Virginia Transportation Research Council, Charlottesville, VA.

Walls III, J., and M. R. Smith (1998).  Life Cycle Cost Analysis in Pavement Design. FHWA-SA-98-079.  Federal Highway Administration, Washington, DC. 107 pp.

Wang, H., S. Tysl, and J. E. Gillott (1994). "Practical Implications of Lithium-Based Chemicals and Admixtures in Controlling Alkali-Aggregate Reactions." Fourth CANMET/ACI International Conference on Superplasticizers and Other Chemical Admixtures in Concrete. V. M. Malhotra, Ed. Pp. 353-366.

Wang, K., P. J. M. Monteiro, B. Rubinsky, and A. Arav (1996). "Microscopic Study of Ice Propagation in Concrete." ACI Materials Journal. Vol. 93. No. 4. July-August. Pp. 370-377.

Waterways Experimental Station (WES) (1949).  Handbook for Concrete and Cement.  Waterways Experiment Station, U. S. Army Corps of Engineers, Vicksburg, MS.

Whiting, D., and J. Schmitt (1989). "A Model for Deicer Scaling Resistance of Field Concretes Containing High-Range Water Reducers." Superplasticizers and Other Chemical Admixtures in Concrete. Proceedings. V.M. Malhotra, Ed. Third International Conference, Ottawa, Canada. SP-119. Pp. 343-359.

Whiting, D., M. Nagi, P. Okamoto, T. Yu, D. Peshkin, K. Smith, M. Darter, J. Clifton, and L. Kaetzel (1994). Optimization of Highway Concrete Technology. SHRP-C-373. Strategic Highway Research Program, National Research Council, Washington DC.

Wills, M. H., Jr. (1964). Contamination of Aggregate Samples.  National Sand and Gravel Association.

Winslow, D. N. (1994). "The Pore System of Coarse Aggregates." Significance of Tests and Properties of Concrete and Concrete-Making Materials. STP 169C. Publication Code No. 04-169030-07. American Society for Testing and Materials.Philadelphia, PA. pp. 429-437.

Wolter, S. (1997). Ettringite: Cancer of Concrete. American Petrographic Laboratories, St. Paul, MN.

Woods, H.(1968).  Durability of Concrete Construction. Monograph No. 4. American Concrete Institute/Iowa State University Press. Detroit. 187 pp.

Washington Department of Transportation (WSDOT) (1983).  Development and Implementation of Washington State’s Pavement Management System.  Report WA-RD 50.1. Washington State Department of Transportation, Olympia, WA.

Zia, P., M. L. Leming, S. H. Ahmad, J. J. Schemmel, R. P.Elliot, and A. E. Naaman (1993). Mechanical Behavior of High Performance Concretes, Volume 1: Summary Report. SHRP-C-361. Strategic Highway Research Program, National Research Council, Washington DC.

 

Previous | Table of Contents | Next