U.S. Department of Transportation
Federal Highway Administration
1200 New Jersey Avenue, SE
Washington, DC 20590
202-366-4000


Skip to content
Facebook iconYouTube iconTwitter iconFlickr iconLinkedInInstagram

Federal Highway Administration Research and Technology
Coordinating, Developing, and Delivering Highway Transportation Innovations

 
spaceREPORTEDC home
This report is an archived publication and may contain dated technical, contact, and link information
Back to Publication List        
Publication Number:  FHWA-HRT-12-051    Date:  August 2012
Publication Number: FHWA-HRT-12-051
Date: August 2012

 

Sample Guide Specifications for Construction of Geosynthetic Reinforced Soil-Integrated Bridge System (GRS-IBS)

 

REFERENCES

  1. Adams, M., Nicks, J., Stabile, T., Wu, J., Schlatter, W., and Hartmann, J. (2011). Geosynthetic Reinforced Soil Integrated Bridge System Interim Implementation Guide, Report No. FHWA-HRT-11-026, Federal Highway Administration, Washington, DC. Obtained from: https://www.fhwa.dot.gov/publications/research/infrastructure/structures/11026/index.cfm.

  2. AASHTO R 10-06. (2011). Standard Practice for Definition of Terms Related to Quality and Statistics as Used in Highway Construction, American Association of State Highway and Transportation Officials, Washington, DC.

  3. ASTM C90-11b. (2011). “Standard Specification for Load-Bearing Concrete Masonry Units,” Book of Standards Volume 04.05, ASTM International, West Conshohocken, PA.

  4. ASTM C1262-10. (2010). “Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units,” Book of Standards Volume 04.05, ASTM International, West Conshohocken, PA.

  5. ASTM C140-12. (2012). “Standard Test Methods for Sampling and Testing Masonry Units and Related Units,” Book of Standards Volume 04.05, ASTM International, West Conshohocken, PA.

  6. AASHTO T 89-10. (2010). Standard Method of Test for Determining the Liquid Limit of Soils, American Association of State Highway and Transportation Officials, Washington, DC.

  7. AASHTO T 90-00. (2008). Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils, American Association of State Highway and Transportation Officials, Washington, DC.

  8. AASHTO T 11-05. (2009). Standard Method of Test for Materials Finer Than 75 m-m (No. 200) Sieve in Mineral Aggregates by Washing, American Association of State Highway and Transportation Officials, Washington, DC.

  9. AASHTO T 104-99. (2007). Standard Method of Test for Soundness of Aggregate by Use Sodium Sulfate or Magnesium Sulfate, American Association of State Highway and Transportation Officials, Washington, DC.

  10. ASTM D4595-11. (2011). “Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method,” Book of Standards Volume 04.13, ASTM International, West Conshohocken, PA.

  11. ASTM D6637-11. (2011). “Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method,” Book of Standards Volume 04.13, ASTM International, West Conshohocken, PA.

  12. AASHTO. (2011). AASHTO LRFD Bridge Construction Specifications, Third Edition, 2011 Interim Revision, American Association of State Highway and Transportation Officials, Washington, DC.

  13. AASHTO M31M/M31-10. (2010) Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement, American Association of State Highway and Transportation Officials, Washington, DC.

  14. ASTM D A615/A615M-12. (2012). “Standard Specifications for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement,” Book of Standards Volume 01.04, ASTM International, West Conshohocken, PA.

  15. AASHTO M 284M/M 284-09. (2009). Standard Specification for Epoxy-Coated Reinforcing Bars: Materials and Coating Requirements, American Association of State Highway and Transportation Officials, Washington, DC.

  16. AASHTO T 99-10. (2010). Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop, American Association of State Highway and Transportation Officials, Washington, DC.

  17. AASHTO R 38-10. (2010). Standard Practice for Quality Assurance of Standard Manufactured Materials, American Association of State Highway and Transportation Officials, Washington, DC.

  18. ASTM D 3665-07. (2007). “Standard Practice for Random Sampling of Construction Materials,” Book of Standards Volume 01.04, ASTM International, West Conshohocken, PA.

  19. AASHTO T 27-05. (2009). Standard Method of Test for Materials Finer Than 75 m-m (No. 200) Sieve in Mineral Aggregates by Washing, American Association of State Highway and Transportation Officials, Washington, DC.

  20. AASHTO T 2-91. (2010). Standard Method of Test for Sampling of Aggregates, American Association of State Highway and Transportation Officials, Washington, DC.

  21. AASHTO T 248-11. (2011). Standard Method of Test for Reducing Samples of Aggregate to Testing Size, American Association of State Highway and Transportation Officials, Washington, DC.

  22. AASHTO T 180-10. (2010). Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop, American Association of State Highway and Transportation Officials, Washington, DC.

  23. AASHTO T 310-11. (2011). Standard Method of Test for In-Place Density and Moisture Content of Soils and Soil-Aggregate by Nuclear Method (Shallow Depth), American Association of State Highway and Transportation Officials, Washington, DC.

  24. Federal Highway Administration. (2012). Acceptance of Non-Structural Precast Elements, Report No. FHWA-HIF-12-045, Federal Highway Administration, Washington, DC.

 

Federal Highway Administration | 1200 New Jersey Avenue, SE | Washington, DC 20590 | 202-366-4000
Turner-Fairbank Highway Research Center | 6300 Georgetown Pike | McLean, VA | 22101