U.S. Department of Transportation
Federal Highway Administration
1200 New Jersey Avenue, SE
Washington, DC 20590
202-366-4000

Skip to content
Facebook iconYouTube iconTwitter iconFlickr iconLinkedInInstagram

Federal Highway Administration Research and Technology
Coordinating, Developing, and Delivering Highway Transportation Innovations

 
REPORT
This report is an archived publication and may contain dated technical, contact, and link information
Back to Publication List        
Publication Number:  FHWA-HRT-13-060    Date:  June 2013
Publication Number: FHWA-HRT-13-060
Date: June 2013

 

Ultra-High Performance Concrete: A State-Of-The-Art Report for The Bridge Community

REFERENCES

  1. Graybeal, B., "Ultra-High Performance Concrete," TechNote, FHWA-HRT-11-038, Federal Highway Administration, McLean, VA, 2011.

  2. Blaise, P.Y. and Couture, M., "Precast, Prestressed Pedestrian Bridge—World's First Reactive Powder Concrete Structure," PCI Journal, Vol. 44, No. 5, September/ October 1999, pp. 60–71.

  3. Schmidt, M., "Sustainable Building With Ultra-High-Performance Concrete (UHPC)—Coordinated Research Program in Germany," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 17–25.

  4. Bétons Fibrés à Ultra-Hautes Performances, Recommandations Provisoires, (Ultra High Performance Fibre-Reinforced Concretes), Interim Recommendations, SETRA-AFGC, Groupe de travail BFUP, Paris, France, January 2002. (in French and English). Available at http://www.afgc.asso.fr/statuts-de-lassociation-francaise-de-genie-civil.html [Cited November 23, 2011].

  5. Toutlemonde, F. et al., "Efforts et Acquis de Recherche sur les BFUP depuis 2002 en vue de l'Actualisation des Recommandations de l'AFGC," (An Overview of Research Advances From 2002 Concerning UHPFRC, in View of Updating AFGC Recommendations), Proceedings of the International Workshop on Ultra High Performance Fibre Reinforced Concrete—Designing and Building with UHPFRC: State of the Art Development, 17–19 November 2009, Marseille, France, AFGC/fib, Paper 5.3.4.

  6. Resplendino, J., "Bétons Fibrés Ultra Performant (BFUP)—Les Nouvelles Recommandations AFGC," (Updated AFGC Recommendations), Proceedings of the International Workshop on Ultra High Performance Fibre Reinforced Concrete—Designing and Building with UHPFRC: State of the Art Development, 17–19 November 2009, Marseille, France, AFGC/fib, Paper 6.1.1.

  7. Marchand, P., "Béton Fibrés Ultra Performant (BFUP) Les Nouvelles Recommandations AFGC Chapitre 2, Calcul," (Updated AFGC Recommendations: Chapter 2, Structural Design), Proceedings of the International Workshop on Ultra High Performance Fibre Reinforced Concrete—Designing and Building with UHPFRC: State of the Art Development, 17–19 November 2009, Marseille, France, AFGC/fib, Paper 6.1.3.

  8. Japan Society of Civil Engineers (JSCE), Recommendations for Design and Construction of Ultra High Strength Fiber Reinforced Concrete Structures (Draft), JSCE Guidelines for Concrete No. 9, 2006.

  9. Kim, B.-S. et al., "R&D Activities and Application of Ultra High Performance Concrete to Cable-Stayed Bridges," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 865–872.

  10. Naaman, A.E. and Wille, K., "The Path to Ultra-High Performance Fiber Reinforced Concrete (UHP-FRC): Five Decades of Progress," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 3–15.

  11. Buitelaar, P., "Heavy Reinforced Ultra High Performance Concrete," Proceedings of the International Symposium on Ultra High Performance Concrete, Ed., Schmidt, M., Fehling, E., and Geisenhanslüke, C., Kassel University Press, Kassel, Germany, 2004, pp. 25–35.

  12. Richard, P., "Reactive Powder Concrete: A New-Ultra High Strength Cementitious Material," Proceedings of the Fourth International Symposium on the Utilization of High-Strength/High-Performance Concrete, 29–31 May 1996, Paris, France, Ed., de Larrard, F. and Lacroix, R., Vol. 3, pp. 1,343–1,357.

  13. Rossi, P., "Ultra-High-Performance Fiber-Reinforced Concretes. A French Perspective on Approaches Used to Produce High-Strength, Ductile Fiber-Reinforced Concrete," Concrete International, Vol. 23, No. 12, December 2001, pp. 46–52.

  14. Rossi, P., "Ultra High-Performance Concrete," Concrete International, Vol. 30, No. 2, February 2008, pp. 31–34.

  15. Racky, P., "Cost-Effectiveness and Sustainability of UHPC," Proceedings of the International Symposium on Ultra High Performance Concrete, Ed., Schmidt, M., Fehling, E., and Geisenhanslüke, C., Kassel University Press, Kassel, Germany, 2004, pp. 797–805.

  16. Schmidt, M. and Jerebic D., "UHPC: Basis for Sustainable Structures—The Gaertnerplatz Bridge in Kassel," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 619–625.

  17. Sedran, T., Durand, C., and de Larrard, F., "An Example of UHPFRC Recycling," Proceedings of the International Workshop on Ultra High Performance Fibre Reinforced Concrete—Designing and Building with UHPFRC: State of the Art Development, 17–19 November 2009, Marseille, France, AFGC/fib, Paper 6.2.2.

  18. Stengel, T. and Schießl, P., "Sustainable Concrete With UHPC—From Life Cycle Inventory Data Collection to Environmental Impact Assessment," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald, S., Kassel University Press, Kassel, Germany, 2008, pp. 461–468.

  19. Stengel, T., "Sustainability Aspects of Traffic Bridges Made From UHPFRC—State-of-the-Art and Challenges for Concrete Technology," Proceedings of the International Workshop on Ultra High Performance Fibre Reinforced Concrete—Designing and Building with UHPFRC: State of the Art Development, 17–19 November 2009, Marseille, France, AFGC/fib, Paper 6.2.4.

  20. Environmental Management Systems—General Guidelines on Principles, Systems and Support Techniques, ISO 14040, International Organization for Standardization, Geneva, Switzerland, 2006.

  21. Piotrowski, S. and Schmidt, M., "Life Cycle Cost Analysis of a UHPC-Bridge on Example of Two Bridge Refurbishment Designs," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 957–964.

  22. Graybeal, B., "Material Property Characterization of Ultra-High Performance Concrete," FHWA, U.S. Department of Transportation, Report No. FHWA-HRT-06-103, McLean, VA, 2006.

  23. Aarup, B., "CRC—A Special Fibre Reinforced High Performance Concrete," Proceedings of the First International RILEM Symposium on Advances in Concrete Through Science and Engineering, Publication pro048, March 21–24, 2004, Evanston, IL, Ed., Weiss, J. et al.

  24. Wille, K., Naaman, A.E., and Parra-Montesinos, G.J., "Ultra-High Performance Concrete With Compressive Strength Exceeding 150 MPa (22 ksi): A Simpler Way," ACI Materials Journal, Vol. 108, No. 1, January–February 2011, pp. 46–54.

  25. Wille, K., Naaman, A.E., and El-Tawil, S., "Optimizing Ultra-High-Performance Fiber-Reinforced Concrete," Concrete International, Vol. 33, No. 9, September 2011, pp. 35–41.

  26. Habel, K. et al., "Ultra-High Performance Fibre Reinforced Concrete Mix Design in Central Canada," Canadian Journal of Civil Engineering, Vol. 35, No. 2, February 2008, pp. 217–224.

  27. Kazemi, S. and Lubell, A., "Influence of Specimen Size and Fiber Content on Mechanical Properties of Ultra-High-Performance Fiber-Reinforced Concrete," ACI Materials Journal, Vol. 109, No. 6, November–December 2012, pp. 675–684.

  28. Holschemacher, K. and Weiße, D., "Economic Mix Design Ultra High-Strength Concrete," Seventh International Symposium on the Utilization of High-Strength/High-Performance Concrete, Vol. II, Publication No. SP-228, Ed., Russell, H.G., American Concrete Institute, Farmington Hills, MI, 2005, pp. 1,133–1,144.

  29. Plank, J., Schröfl, C., and Gruber, M., "Use of a Supplemental Agent to Improve Flowability of Ultra-High-Performance Concrete," Ninth ACI International Conference on Superplasticizers and Other Chemical Admixtures, Publication No. SP-262, Ed., Gupta, P., Holland, T.C., and Malhotra, V.M., American Concrete Institute, Farmington Hills, MI, 2009, pp. 1–16.

  30. Rougeau, P. and Borys, B., "Ultra High Performance Concrete With Ultrafine Particles Other Than Silica Fume," Proceedings of the International Symposium on Ultra High Performance Concrete, Ed., Schmidt, M., Fehling, E., and Geisenhanslüke, C., Kassel University Press, Kassel, Germany, 2004, pp. 213–225.

  31. Van, V.T.A. and Ludwig, H-M., "Proportioning Optimization of UHPC Containing Rice Husk Ash and Ground Granulated Blast-Furnace Slag," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 197–205.

  32. Arafa, M., Shihada, S., and Karmont, M., "Mechanical Properties of Ultra High Performances Concrete Produced in the Gaza Strip," Asian Journal of Materials Science, Vol. 2, No. 1, 2010, pp. 1–12.

  33. Fidjestol, P., Thorsteinsen, R.J., and Svennevig, P., "Making UHPC with Local Materials—The Way Forward," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 207–214.

  34. Schmidt, M. et al., "Mix Design and Properties of Ultra-High Performance Fibre Reinforced Concrete for the Construction of aComposite Concrete UHPFRC-Concrete Bridge," Proceedings of IABSE Symposium Improving Infrastructure Worldwide—Bringing People Closer, IABSE, Weimar, Germany, Vol. 93,2007, pp. 466–476. Also Ultra High Performance Concrete (UHPC)—10 Years of Research and Development at the University of Kassel, Ed., Schmidt, M. and Fehling, E., Kassel University Press, Kassel, Germany, 2007, pp. 44–54.

  35. Collepardi, S. et al., "Mechanical Properties of Modified Reactive Powder Concrete," Proceedings of the Fifth CANMET/ACI International Conference on Superplasticizers and Other Chemical Admixtures in Concrete, 1997, Rome, Italy, Publication No. SP-173, Ed., Malhotra V.M., American Concrete Institute, Farmington Hills, MI, pp. 1–21.

  36. Coppola, L. et al., "Influence of Super-Plasticizer Type on Compressive Strength of Reactive Powder Mortars," Proceedings of the Fifth CANMET/ACI International Conference on Superplasticizers and Other Chemical Admixtures in Concrete, 1997, Rome, Italy, Publication No. SP-173, Ed., Malhotra V.M., American Concrete Institute, Farmington Hills, MI, pp. 537–557.

  37. Teichmann, T. and Schmidt, M., "Mix Design and Durability of Ultra High Performance Concrete (UHPC)," Proceedings of the 4th International Ph.D. Symposium in Civil Engineering, Munich, 2002, pp. 341–347.

  38. Williams, E. et al., "Laboratory Characterization of Cor-Tuf Concrete With and Without Steel Fibers," Technical Report No. ERDC/GSL TR-02-22, U.S. Army Corps of Engineers, Engineer Research and Development Center, Washington, DC, July 2009.

  39. Roth, M.J. et al., "Laboratory Investigation of the Characterization of Cor-Tuf Flexural and Splitting Tensile Properties," Report No. ERDC/GSL TR-10-46, U.S. Army Corps of Engineers, Engineer Research and Development Center, Washington, DC, October 2010.

  40. Rossi, P. et al., "Bending and Compressive Behaviors of a New Cement Composite," Cement and Concrete Research, Vol. 35, No. 1, 2005, pp. 27–33.

  41. Mazanec, O. and Schießl, P., "Mixing Time Optimization for UHPC," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 401–408.

  42. Mazanec, O., Lowke, D., and Schießl, P., "Mixing of High Performance Concrete: Effect of Concrete Composition and Mixing Intensity on Mixing Time," Materials and Structure, Vol. 43, No. 3, 2010, pp. 357–365.

  43. Kim, S.W. et al., "Effect of Filling Method on Fibre Orientation & Dispersion and Mechanical Properties of UHPC," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 185–192.

  44. Stiel, T., Karihaloo, B., and Fehling, E., "Effect of Casting Direction on the Mechanical Properties of CARDIFRC®," Proceedings of the International Symposium on Ultra High Performance Concrete, Ed., Schmidt, M., Fehling, E., and Geisenhanslüke, C., Kassel University Press, Kassel, Germany, 2004, pp. 481–493.

  45. Ozyildirim, C., "Evaluation of Ultra-High-Performance Fiber-Reinforced Concrete," Virginia Center for Transportation Innovation and Research, Report No. FHWA/VCTIR 12-R1, Federal Highway Administration, McLean, VA, 2011.

  46. Graybeal, B., "Construction of Field-Cast Ultra-High Performance Concrete Connections," TechNote, Federal Highway Administration, McLean, VA, FHWA-HRT-12-038, 2012.

  47. Graybeal, B. and Stone, B., "Compression Response of a Rapid-Strengthening Ultra-High Performance Concrete Formulation," FHWA, U.S. Department of Transportation, Report No. FHWA-HRT-12-065, National Technical Information Service Accession No. PB2012-112545, 2012.

  48. Ay, L., "Curing Tests on Ultra High Strength Plain and Steel Fibrous Cement Based Composites," Proceedings of the International Symposium on Ultra High Performance Concrete, Ed., Schmidt, M., Fehling, E., and Geisenhanslüke, C., Kassel University Press, Kassel, Germany, 2004, pp. 695–701.

  49. Heinz, D. and Ludwig, H.-M., "Heat Treatment and the Risk of DEF Delayed Ettringite Formation in UHPC," Proceedings of the International Symposium on Ultra High Performance Concrete, Ed., Schmidt, M., Fehling, E., and Geisenhanslüke, C., Kassel University Press, Kassel, Germany, 2004, pp. 717–730.

  50. Schachinger, I., Hilbig, H., and Stengal, T., "Effect of Curing Temperatures at an Early Age on the Long-Term Strength Development of UHPC," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 205–212.

  51. Heinz, D., Urbonas, L., and Gerlicher, T., "Effect of Heat Treatment Method on the Properties of UHPC," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 283–290.

  52. Massidda, L. et al., "High Pressure Steam Curing of Reactive-Powder Mortars," Fifth CANMET/ACI Conference on Recent Advances in Concrete Technology, Fifth International Conference, Publication No. SP-200, Ed., Malhotra, V.M., American Concrete Institute, Farmington Hills, MI, 2001, pp. 447–463.

  53. Standard Test Method for Flow of Hydraulic Cement Mortar, ASTM C1437, ASTM International, Volume 04.01, West Conshohocken, PA, 2007.

  54. Standard Test Method for Slump of Hydraulic-Cement Concrete, ASTM C143, ASTM International, Volume 04.02, West Conshohocken, PA, 2012.

  55. Scheffler, B. and Schmidt, M., "Application of UHPC for Multifunctional Road Pavements," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 913–920.

  56. Swenty, M. and Graybeal, B., "Material Characterization of Field-Cast Connection Grouts," FHWA, U.S. Department of Transportation, Report No. FHWA-HRT-13-041, National Technical Information Service Accession No. PB2013-130231, 2013.

  57. Standard Method of Test for Time of Setting of Concrete Mixtures by Penetration Resistance, AASHTO Designation: T 197, Standard Specifications for Transportation Materials and Methods of Sampling and Testing, Part 2A—Tests, American Association of State Highway and Transportation Officials, Washington, DC, 2005.

  58. Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM C39, ASTM International, Volume 04.02, West Conshohocken, PA, 2012.

  59. Standard Practice for Capping Cylindrical Concrete Specimens, ASTM C617, ASTM International, Volume 04.02, West Conshohocken, PA, 2012.

  60. Graybeal, B. and Davis, M., "Cylinder or Cube: Strength Testing of 80 to 200 MPa (11.6 to 29 ksi) Ultra-High-Performance Fiber-Reinforced Concrete," ACI Materials Journal, Vol. 105, No. 6, November–December 2008, pp. 603–609.

  61. Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens), ASTM C109, ASTM International, Volume 04.02, West Conshohocken, PA, 2012.

  62. Ahlborn, T. and Kollmorgen, G., "Impact of Age and Size on the Mechanical Behavior of Ductal®," Report No. CSD-2004-07, Michigan Technological University, 2004.

  63. Graybeal, B., "UHPC for PBES Connections." Available at http://www.abc.fiu.edu/wp-content/uploads/2011/10/Graybeal-UHPC-20110929Webinar-distributed.pdf [Cited March 12, 2012].

  64. Iowa Department of Transportation, "Special Provisions for Ultra High Performance Concrete," SP-090112a, Effective Date, February 15, 2011, Available at http://www.iowadot.gov/us6kegcreek/documents/SP-concrete.pdf [Cited May 29, 2012].

  65. New York State Department of Transportation, "557.21.16—Field Cast Joints Between Precast Concrete Units," July 2010.

  66. Fröhlich, S. and Schmidt, M., "Influences on Repeatability and Reproducibility of Testing Methods for Fresh UHPC," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 225–232.

  67. Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM C39, ASTM International, Volume 04.02, West Conshohocken, PA, 2004.

  68. Orgass, M. and Klug, Y., "Fibre Reinforced Ultra-High Strength Concretes," Proceedings of the International Symposium on Ultra High Performance Concrete, Ed., Schmidt, M., Fehling, E., and Geisenhanslüke, C., Kassel University Press, Kassel, Germany, 2004, pp. 637–647.

  69. Magureanu, C. et al., "Mechanical Properties and Durability of Ultra-High-Performance Concrete," ACI Materials Journal, Vol. 109, No. 2, March–April 2012, pp. 177–183.

  70. Skazlic, M., Serdar, M., and Bjegovic D., "Influence of Test Specimens Geometry on Compressive Strength of Ultra High Performance Concrete," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 295–301.

  71. Schmidt, M. and Fröhlich, S., "Testing of UHPC," Proceedings of the Third International fib Congress and Exhibition Incorporating the PCI Annual Convention and National Bridge Conference, Washington, DC, May 29–June 2, 2010, Compact Disc, Paper 237.

  72. Pimienta, P. et al., "Behaviour of UHPFRC at High Temperatures," Proceedings of the International Workshop on Ultra High Performance Fibre Reinforced Concrete—Designing and Building with UHPFRC: State of the Art Development, 17–19 November 2009, Marseille, France, AFGC/fib, Paper 5.3.2.

  73. Diederichs, U. and Mertzsch, O., "Behaviour of Ultra High Strength Concrete at High Temperatures," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 347–354.

  74. Curbach, M. and Speck, K., "Ultra High Performance Concrete Under Biaxial Compression," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 477–484.

  75. Leutbecher, T. and Fehling, E., "Structural Behaviour of UHPC Under Tensile Stress and Biaxial Loading," Proceedings of the International Symposium on Ultra High Performance Concrete, Ed., Schmidt, M., Fehling, E., and Geisenhanslüke, C., Kassel University Press, Kassel, Germany, 2004, pp. 435–446.

  76. AASHTO LRFD Bridge Design Specifications , Sixth Edition, American Association of State Highway and Transportation Officials, Washington, DC, 2012.

  77. Graybeal, B., Perry, V., and Royce, M., "UHPC Ultra-High Performance Concrete," NHI Innovations Webinar, November 18, 2010. Available at https://connectdot.connectsolutions.com/n134083201011 [Cited April 3, 2012].

  78. Graybeal, B. et al., "Direct and Flexural Test Methods for Determination of the Tensile Stress-Strain Response of UHPFRC," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 395–402.

  79. Graybeal, B. and Baby, F., "Development of a Direct Tension Test Method for UHPFRC," ACI Materials Journal, Vol. 110, No. 2, March–April 2013.

  80. Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading), ASTM C78, ASTM International, Volume 04.02, West Conshohocken, PA, 2010.

  81. Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, ASTM C496, ASTM International, Volume 04.02, West Conshohocken, PA, 2011.

  82. Graybeal, B.A, "Practical Means for Determination of the Tensile Behavior of Ultra-High Performance Concrete," Journal of ASTM International, Vol. 3, No. 8, September 2006.

  83. Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third Point Loading) (Withdrawn 2006), ASTM C1018, ASTM International, Volume 04.02, West Conshohocken, PA, 1997.

  84. Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading), ASTM C1609, ASTM International, Volume 04.02, West Conshohocken, PA, 2012.

  85. RILEM TC 162-TDF, "Test and Design Methods for Steel Fibre Reinforced Concrete, Recommendations," Materials and Structures , Vol. 35, 2002, pp. 579–582.

  86. Baby, F. et al., "A Proposed Flexural Test Method and Associated Inverse Analysis for UHPFRC," ACI Materials Journal, Vol. 109, No. 5, September–October 2012, pp. 545–555.

  87. Qian, S. and Li, V.C., "Simplified Inverse Method for Determining the Tensile Properties of SHCCs," Journal of Advanced Concrete Technology, Vol. 6, No. 2, 2008, pp. 353–363.

  88. Wille, K. and Parra-Montesinos, G., "Effect of Beam Size, Casting Method, and Support Conditions on Flexural Behavior of Ultra-High-Performance Fiber-Reinforced Concrete," ACI Materials Journal, Vol. 109, No. 3, May–June 2012, pp. 379–388.

  89. Standard Method of Test for Tensile Strength of Hydraulic Cement Mortars, AASHTO Designation: T 132, Standard Specifications for Transportation Materials and Methods of Sampling and Testing, Part 2A—Tests, American Association of State Highway and Transportation Officials, Washington, DC, 1987.

  90. Reineck, K.-H. and Frettlöhr, B., "Tests on Scale Effect of UHPFRC Under Bending and Axial Forces," Proceedings of the Third International fib Congress and Exhibition Incorporating the PCI Annual Convention and National Bridge Conference, Washington, DC, May 29–June 2, 2010, Compact Disc, Paper 54.

  91. Gao, R., Stroeven, P., and Hendriks, C.F., "Mechanical Properties of Reactive Powder Concrete Beams," Seventh International Symposium on the Utilization of High-Strength/High-Performance Concrete, Vol. II, Publication No. SP-228, Ed., Russell, H.G., American Concrete Institute, Farmington Hills, MI, 2005, pp. 1,237–1,252.

  92. Ichinomiya, T. et al., "Experimental Study on Mechanical Properties of Ultra-High-Strength Concrete with Low-Autogenous-Shrinkage," Seventh International Symposium on the Utilization of High-Strength/High-Performance Concrete, Vol. II, Publication No. SP-228, Ed., Russell, H.G., American Concrete Institute, Farmington Hills, MI, 2005, pp. 1,341–1,352.

  93. Lallemant-Gamboa, I. et al., "Formulations, Characterizations and Applications of Ultra High-Performance Concrete," Seventh International Symposium on the Utilization of High-Strength/High-Performance Concrete, Vol. II, Publication No. SP-228, Ed., Russell, H.G., American Concrete Institute, Farmington Hills, MI, 2005, pp. 1,221–1,235.

  94. Marijan, S., Dubravka, B., and Zeljana, S., "Acoustic Emission Response and Mechanical Characterization of Ultra High-Performance Concrete Types," Seventh International Symposium on the Utilization of High-Strength/High-Performance Concrete, Vol. II, Publication No. SP-228, Ed., Russell, H.G., American Concrete Institute, Farmington Hills, MI, 2005, pp. 1,207–1,220.

  95. Leutbecher, T. and Fehling E., "Tensile Behavior of Ultra-High-Performance Concrete Reinforced with Reinforcing Bars and Fibers: Minimizing Fiber Content," ACI Materials Journal, Vol. 109, No. 2, March–April 2012, pp. 253–263.

  96. Roth, M.J. et al., "Ultra-High Strength, Glass Fiber-Reinforced Concrete: Mechanical Behavior and Numerical Modeling," ACI Materials Journal, Vol. 107, No. 2, March–April 2010, pp. 185–194.

  97. Zheng, W., Kwan, A.K.H., and Lee, P.K.K., "Direct Tension Test of Concrete," ACI Materials Journal, Vol. 98, No. 1, January–February 2001, pp. 63–71.

  98. Zhang, J., Stang, H., and Li, V., "Experimental Study on Crack Bridging in FRC Under Uniaxial Fatigue Tension," Journal of Materials in Civil Engineering, ASCE, Vol. 12, No. 1, February 2000, pp. 66–73.

  99. Nielsen, C.V., "Tensile Postcrack Behavior of Steel Fiber Reinforced Ultra-High Strength Concrete," International Workshop on High Performance Concrete, Publication No. SP-159, Ed., Zia, P., American Concrete Institute, Farmington Hills, MI, 1996, pp. 231–246.

  100. Behloul, M., Bernier, G., and Cheyrezy, M., "Tensile Behavior of Reactive Powder Concrete (RPC)," Proceedings of the Fourth International Symposium on the Utilization of High-Strength/High-Performance Concrete, 29–31 May 1996, Paris, France, Ed. de Larrard, F. and Lacroix, R., Vol. 3, pp. 1,375–1,381.

  101. Wang, Y., Li, V.C., and Backer, S., "Experimental Determination of Tensile Behavior of Fiber Reinforced Concrete," ACI Materials Journal, Vol. 87, No. 5, September–October 1990, pp. 461–468.

  102. D'Alessandro, K.C. et al., "Investigation of Biaxial Stress States of Ultra-High Performance Concrete Bridge Girders Through Small Panel Testing and Finite Element Analysis," Proceedings of the International Workshop on Ultra High Performance Fibre Reinforced Concrete—Designing and Building with UHPFRC: State of the Art and Development, 17-18 November 2009, Marseille, France, AFGC/fib, Paper P 2.

  103. Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression, ASTM C469, ASTM International, Volume 04.02, West Conshohocken, PA, 2010.

  104. Ma, J. et al., "Comparative Investigations on Ultra-High Performance Concrete With and Without Coarse Aggregates," Proceedings of the International Symposium on Ultra High Performance Concrete, Ed., Schmidt, M., Fehling, E., and Geisenhanslüke, C., Kassel University Press, Kassel, Germany, 2004, pp. 205–212.

  105. Bonneau, O. et al., "Mechanical Properties and Durability of Two Industrial Reactive Powder Concretes," ACI Materials Journal, Vol. 94, No. 4, July–August 1997, pp. 286–290.

  106. Simon, A., "Les Nouvelles Recommandations AFGC sur les BFUP CHAPITRE I—Comportement et Caractéristiques Mécaniques des BFUP," (Updated AFGC Recommendations: Chapter 1 Materials), Proceedings of the International Workshop on Ultra High Performance Fibre Reinforced Concrete—Designing and Building with UHPFRC: State of the Art Development, 17–19 November 2009, Marseille, France, AFGC/fib, Paper 6.1.2.

  107. Joh, C. et al., "Punching Shear Strength Estimation of UHPC Slabs," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 719-726.

  108. Ahlborn, T.M. et al., "Durability and Strength Characterization of Ultra-High Performance Concrete Under Variable Curing Regimes," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald, S., Kassel University Press, Kassel, Germany, 2008, pp. 197–204.

  109. Graybeal, B., "Structural Behavior of Ultra-High Performance Concrete Prestressed I-Girders," FHWA, U.S. Department of Transportation, Report No. FHWA-HRT-06-115, 2006. Available through National Technical Information Service at http://www.ntis.gov with Accession No. PB2007104386 [Cited November 23, 2011].

  110. Ocel, J. and Graybeal, B., "Fatigue Behavior of an Ultra-High Performance Concrete I-Girder," Proceedings of the PCI National Bridge Conference, October 22–24, 2007, Phoenix, AZ, Compact Disc, Paper 82.

  111. Parsekian, G.A. et al., "Static and Fatigue Tests on Ductal® UHPFRC Footbridge Sections," Proceedings of the Fifth ACI/CANMET/IBRACON International Conference on High-Performance Concrete Structures and Materials , 18–20 June 2008, Manaus, Amazon State (AM), Brazil, Publication No. SP-253, Ed., Figueiredo, E.P. et al., American Concrete Institute, Farmington Hills, MI, 2008, pp. 273–290.

  112. Bierwagen, D. et al., "Ultra-High Performance Concrete Waffle Slab Bridge Deck for Wapello County, Iowa," HPC Bridge Views , Issue No. 65, January/February 2011. Available at http://www.hpcbridgeviews.org [Cited November 23, 2011].

  113. Aaleti, S. et al., "Experimental Evaluation of Structural Behavior of Precast UHPC Waffle Bridge Deck Panels and Connections," Transportation Research Board 90th Annual Meeting Compendium of Papers, January 23–27, 2011, Washington, DC, Compact Disc, Session 404, Paper 11-2705.

  114. Graybeal, B. and Hartmann, J., "Ultra-High Performance Concrete Material Properties," Transportation Research Board Annual Meeting, 2003, Washington, DC, Compact Disc.

  115. Schmidt, M. et al., "Durability of Ultra High Performance Concrete," Proceedings of the 6th International Symposium on High Strength/High Performance Concrete, Leipzig, Germany, June 2002, Ed., König, G., Dehn, F., and Faust, T., Vol. 2, pp. 1,367-1,376.

  116. Fitik, B., Niedermeier, R., and Zilch, K., "Fatigue Behaviour of Ultra High-Performance Concrete Under Cyclic Stress Reversal Loading," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 529–536.

  117. Grünberg, J. et al., "Multi-Axial and Fatigue Behaviour of Ultra-High-Performance Concrete," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 485–492.

  118. Lohaus, L. and Elsmeier, K., "Fatigue Behaviour of Plain and Fibre Reinforced Ultra-High Performance Concrete," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 631–637.

  119. Behloul, M. et al., "Fatigue Flexural Behavior of Pre-Cracked Specimens of Special UHPFRC," Seventh International Symposium on the Utilization of High-Strength/High-Performance Concrete, Vol. II, Publication No. SP-228, Ed., Russell, H.G., American Concrete Institute, Farmington Hills, MI, 2005, pp.1,253–1,268.

  120. Lappa, E.S., Braam, C.R., and Walraven, J.C., "Static and Fatigue Bending Tests of UHPC," Proceedings of the International Symposium on Ultra High Performance Concrete, Ed., Schmidt, M., Fehling, E., and Geisenhanslüke, C., Kassel University Press, Kassel, Germany, 2004, pp. 449–458.

  121. Fehling, E., Bunje, K., and Leutbecher, T., "Design Relevant Properties of Hardened Ultra High Performance Concrete," Proceedings of the International Symposium on Ultra High Performance Concrete, Ed., Schmidt, M., Fehling, E., and Geisenhanslüke, C., Kassel University Press, Kassel, Germany, 2004, pp. 327–338.

  122. Behloul, M. et al., "Fire Resistance of Ductal® Ultra High Performance Concrete," Proceedings of the First fib Congress, Osaka, Japan, 2002, pp. 421–430.

  123. Carbonell, M.A. et al., "Bond Strength Between UHPC and Normal Strength Concrete (NSC) in Accordance with Split Prism and Freeze-Thaw Cycling Tests," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 377–384.

  124. Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing, ASTM C666, ASTM International, Volume 04.02, West Conshohocken, PA, 2008.

  125. Bindiganvile, V., Bantha, N., and Aarup, B., "Impact Response of Ultra-High-Strength Fiber-Reinforced Cement Composite," ACI Materials Journal, Vol. 99, No. 6, November–December 2002, pp. 543–548.

  126. Cadoni, E., Caverzan, A., and di Prisco, M., "Dynamic Behaviour of HPFR Cementitious Composites," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 743–750.

  127. Leonhardt, S., Lowke, D., and Gehlen, G., "Effect of Fibres on Impact Resistance of Ultra High Performance Concrete," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 811–817.

  128. Standard Test Method for Creep of Concrete in Compression, ASTM C512, ASTM International, Volume 04.02, West Conshohocken, PA, 2010.

  129. Burkart, I. and Müller, H.S., "Creep and Shrinkage Characteristics of Ultra High Strength Concrete (UHPC)," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 469–476.

  130. Acker, P. and Behloul, M., "Ductal® Technology: A Large Spectrum of Properties, A Wide Range of Applications," Proceedings of the International Symposium on Ultra High Performance Concrete, Ed., Schmidt, M., Fehling, E., and Geisenhanslüke, C., Kassel University Press, Kassel, Germany, 2004, pp. 11–23.

  131. Francisco, P. et al., "Ultra High Performance Concrete for Prestressed Elements—Interest of Creep Prediction," Proceedings of the International Workshop on Ultra High Performance Fibre Reinforced Concrete—Designing and Building with UHPFRC: State of the Art Development, 17–19 November 2009, Marseille, France, AFGC/fib, Paper 5.2.1.

  132. Francisco, P. et al., "Creep and Shrinkage Prediction for a Heat-Treated Ultra High Performance Fibre-Reinforced Concrete," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 325–331.

  133. Flietstra, J.C. et al., "Creep Behavior of UHPC Under Compressive Loading With Varying Curing Regimes," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 333–340.

  134. Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete, ASTM C157, ASTM International, Volume 04.02, West Conshohocken, PA, 2008.

  135. Eppers, S. and Müller, C., "Autogenous Shrinkage Strain of Ultra-High-Performance Concrete (UHPC)," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 433–441.

  136. Staquet, S. and Espion, B., "Early-Age Autogenous Shrinkage of UHPC Incorporating Very Fine Fly Ash or Metakaolin in Replacement of Silica Fume," Proceedings of the International Symposium on Ultra High Performance Concrete, Ed., Schmidt, M., Fehling, E., and Geisenhanslüke, C., Kassel University Press, Kassel, Germany, 2004, pp. 587–599.

  137. Suzuki, M., Maruyama, I., and Sato, R., "Properties of Expansive-Ultra High-Strength Concrete," Seventh International Symposium on the Utilization of High-Strength/High-Performance Concrete, Vol. II, Publication No. SP-228, Ed., Russell, H.G., American Concrete Institute, Farmington Hills, MI, 2005, pp. 1,159–1,173.

  138. Kim, S. et al., "Shrinkage Behavior of Ultra High Performance Concrete at the Manufacturing Stage," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 317–324.

  139. Graybeal, B.A., "Structural Behavior of a Prototype Ultra-High Performance Concrete Pi-Girder," FHWA, U.S. Department of Transportation, Report No. FHWA-HRT-10-027, 2009. Available through National Technical Information Service at http://www.ntis.gov with Accession No. PB2009115495 [Cited November 23, 2011].

  140. Meade, T.M. and Graybeal, B.A., "Flexural Response of Lightly Reinforced Ultra-High Performance Concrete Beams," Proceedings of the Third International fib Congress and Exhibition Incorporating the PCI Annual Convention and National Bridge Conference, Washington, DC, May 29–June 2, 2010, Compact Disc, Paper 101.

  141. Visage, E.T. et al., "Experimental and Analytical Analysis of the Flexural Behavior of UHPC Beams," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 403–410.

  142. Gröger, J., Viet Tue, N., and Wille, K., "Bending Behaviour and Variation of Flexural Parameters of UHPFRC," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 419–426.

  143. Frettlöhr, B. et al., "Tests on the Flexural Tensile Strength of a UHPFRC Subjected to Cycling and Reversed Loading," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 427–434.

  144. Stürwald, S. and Fehling, E., "Design of Reinforced UHPFRC in Flexure," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 443–450.

  145. Adeline, R. and Behloul, M., "High Ductile Beams Without Passive Reinforcement," Proceedings of the Fourth International Symposium on the Utilization of High-Strength/ High-Performance Concrete, 29-31 May 1996, Paris, France, Ed., de Larrard, F. and Lacroix, R., Vol. 3, pp. 1,383–1,390.

  146. Maguire, M. et al., "Ultra-High-Performance Concrete in Standard Precast/Prestressed Concrete Products," Proceedings of the PCI National Bridge Conference, September 12–15, 2009, San Antonio, TX, Paper 33.

  147. Steinberg, E. and Reeves, E., "Structural Reliability of UHPC Bridge Girders in Flexure," Proceedings of the PCI National Bridge Conference, October 17–20, 2004, Atlanta, GA, Compact Disc, Paper 29.

  148. Reeves, E.E., "Structural Reliability of Ultra-High Performance Concrete in Flexure," Master's Thesis, College of Engineering and Technology, Ohio University, Athens, OH, 2004.

  149. Steinberg, E., "Structural Reliability of Prestressed UHPC Flexure Models for Bridge Girders," Journal of Bridge Engineering, Vol. 15, No. 1, 2010, pp. 65–72.

  150. Voo, Y.L. and Foster, S.J., "Malaysia First Ultra-High Performance Concrete Prestressed Motorway Bridge: Experimental Verification," 5th International Specialty Conference on Fiber Reinforced Materials, Singapore, August 28–29, 2008. Available at http://www.ju.edu.jo/sites/Academic/hunaiti/Lists/Published%20Research/Attachments/6/Abstract.pdf [Cited March 24, 2012].

  151. Sujivorakul, C., "Flexural Model of Doubly Reinforced Concrete Beams Using Ultra High Performance Fiber Reinforced Concrete," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 435–442.

  152. Walsh, K.K. and Steinberg E.P., "Moment Redistribution Capacity in Ultra-High Performance Concrete," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 639–646.

  153. Tue, N.V. et al., "Bearing Capacity of Stub Columns Made of NSC, HSC and UHPC Confined by a Steel Tube," Proceedings of the International Symposium on Ultra High Performance Concrete, Ed., Schmidt, M., Fehling, E., and Geisenhanslüke, C., Kassel University Press, Kassel, Germany, 2004, pp. 339–350.

  154. Empelmann, M., Teutsch, M., and Steven, G., "Load-Bearing Behaviour of Centrically Loaded UHPFRC Columns," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 521–528.

  155. Yan, P.Y. and Feng, J.W., "Mechanical Behavior of UHPC and UHPC Filled Steel Tubular Stub Columns," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 355–362.

  156. Jungwirth, J. and Muttoni, A., "Structural Behavior of Tension Members in UHPC," Proceedings of the International Symposium on Ultra High Performance Concrete, Ed., Schmidt, M., Fehling, E., and Geisenhanslüke, C., Kassel University Press, Kassel, Germany, 2004, pp. 533–544.

  157. Holschemacher, K. et al., "Ultra High Strength Concrete Under Concentrated Loading," Proceedings of the International Symposium on Ultra High Performance Concrete, Ed., Schmidt, M., Fehling, E., and Geisenhanslüke, C., Kassel University Press, Kassel, Germany, 2004, pp. 471–480.

  158. Holschemacher, K. et al., "Experimental Investigation on Ultra High-Strength Concrete Under Concentrated Loading," Seventh International Symposium on the Utilization of High-Strength/High-Performance Concrete, Vol. II, Publication No. SP-228, Ed., Russell, H.G., American Concrete Institute, Farmington Hills, MI, 2005, pp. 1,145–1,157.

  159. Tragwerke aus Beton, Stahlbeton und Spannbeton, DIN 1045-01, Deutsches Institut für Normung E.V., Berlin, Germany, 2004.

  160. Hegger, J. et al., "Connections of Precast UHPC Elements," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 655–662.

  161. Morcous, G., Maguire, M., and Tadros, M.K., "Shear Capacity of Ultra-High-Performance Concrete I-Girders With Orthogonal Welded Wire Reinforcement," Proceedings of the Thomas T. C. Hsu Symposium: Shear and Torsion in Concrete Structures, New Orleans, LA, Publication No. SP-265, American Concrete Institute, Farmington Hills, MI, 2009, Compact Disc, pp. 511–532.

  162. American Concrete Institute (ACI) Committee 318, Building Code Requirements for Structural Concrete (ACI 318-08) and Commentary (ACI 318R-08), ACI, Farmington Hills, MI, 2008.

  163. Baby, F. et al, "Ultimate Shear Strength of Ultra High Performance Fibre Reinforced Concrete Beams," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 485–492.

  164. Baby, F. et al., "Shear Resistance of Ultra High Performance Fibre Reinforced Concrete I-Beams," Proceedings of the 7th International Conference on Fracture Mechanics of Concrete and Concrete Structures, Jeju, Korea, May 2010, pp. 1,411–1,417.

  165. Bunje, K. and Fehling, E., "About Shear Force and Punching Shear Resistance of Structural Elements of Ultra High Performance Concrete," Proceedings of the International Symposium on Ultra High Performance Concrete, Ed., Schmidt, M., Fehling, E., and Geisenhanslüke, C., Kassel University Press, Kassel, Germany, 2004, pp. 401–411.

  166. Hegger, J., Tuchlinski, D., and Komner, B., "Bond Anchorage Behavior and Shear Capacity of Ultra High Performance Concrete Beams," Proceedings of the International Symposium on Ultra High Performance Concrete, Ed., Schmidt, M., Fehling, E., and Geisenhanslüke, C., Kassel University Press, Kassel, Germany, 2004, pp. 351–360.

  167. Hegger, J. and Bertram, G., "Shear Carrying Capacity of Steel Fiber Reinforced UHPC," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 513–520.

  168. Cauberg. N. et al., "Shear Capacity of UHPC—Beam Tests," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 451–458.

  169. Fehling, E. and Thiemicke, J., "Experimental Investigation on I-Shaped UHPC Beams With Combined Reinforcement Under Shear Load," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 477–484.

  170. Bertram, G. and Hegger, J., "Shear Behavior of Pretensioned UHPC Beams—Tests and Design," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 493–500.

  171. Bertram, G. and Hegger, J., "Pretensioned UHPC Beams With and Without Openings," Proceedings of the Third International fib Congress and Exhibition Incorporating the PCI Annual Convention and National Bridge Conference, Washington, DC, May 29–June 2, 2010, Compact Disc, Paper 236.

  172. Wu, X. and Han, S.-M., "First Diagonal Cracking and Ultimate Shear of I-Shaped Reinforced Girders of Ultra High Performance Fiber Reinforced Concrete Without Stirrup," International Journal of Concrete Structures and Materials, Vol. 3, No. 1, 2009, pp. 47–56.

  173. Harris, D.K. and Roberts-Wollmann, C.L., "Characterization of Punching Shear Capacity of Thin Ultra-High Performance Concrete Slabs," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 727–734.

  174. Harris, D.K. and Roberts-Wollmann, C.L., "Characterization of the Punching Shear Capacity of Thin Ultra-High Performance Concrete Slabs," Virginia Transportation Research Council, Report No. VTRC 05-CR26, Richmond, VA, 2005.

  175. Toutlemonde, F. et al., "Innovative Design of Ultra High-Performance Fibre Reinforced Concrete Ribbed Slab: Experimental Validationand Preliminary Detailed Analyses," Seventh International Symposium on the Utilization of High-Strength/High-Performance Concrete, Vol. II, Publication No. SP-228, Ed., Russell, H.G., American Concrete Institute, Farmington Hills, MI, 2005, pp. 1,187–1,205.

  176. Naaman, A., Likhitruangsilp, V., and Parra-Montesinos, G., "Punching Shear Response of High-Performance Fiber-Reinforced Cementitious Composite Slabs," ACI Structural Journal, Vol. 104, No. 2, March–April 2007, pp. 170–179.

  177. American Concrete Institute (ACI) Committee 318, Building Code Requirements for Structural Concrete (ACI 318-05) and Commentary (ACI 318R-05), ACI, Farmington Hills, MI, 2005.

  178. Saleem, M.A. et al., "Ultra-High Performance Concrete Light-Weight Deck for Moveable Bridges," Proceedings of the Third International fib Congress and Exhibition Incorporating the PCI Annual Convention and National Bridge Conference, Washington, DC, May 29–June 2, 2010, Compact Disc, Paper 361.

  179. Aaleti, S.R. et al., "Precast UHPC Waffle Deck Panels and Connections for Accelerated Bridge Construction," Proceedings of the PCI National Bridge Conference, October 22–26, 2011, Salt Lake City, UT, Compact Disc, Paper 84.

  180. Moreillon, L., Nseir, J., and Suter, R., "Shear and Flexural Strength of Thin UHPC Slabs," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 749–756.

  181. Banta, T.E., "Horizontal Shear Transfer Between Ultra High Performance Concrete and Lightweight Concrete," Master's Thesis, Virginia Polytechnic Institute and State University, 2005.

  182. AASHTO LRFD Bridge Design Specifications, Third Edition, American Association of State Highway and Transportation Officials, Washington, DC, 2004.

  183. Crane, C.K. and Kahn, L.F., "Interface Shear Capacity of Small UHPC/HPC Composite T-Beams," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 459–467.

  184. Graybeal, B., "Ultra-High Performance Concrete Composite Connections for Precast Concrete Bridge Decks," FHWA, U.S. Department of Transportation, Report No. FHWA-HRT-12-041, 109 pp. Available through National Technical Information Service at http://www.ntis.gov with Accession No. PB2012107569 [Cited April 13, 2012]. To be published.

  185. Hegger, J., Rauscher, S., and Goralski, C., "Push-Out Tests on Headed Studs Embedded in UHPC," Proceedings of the International Symposium on Ultra High Performance Concrete, Ed., Schmidt, M., Fehling, E., and Geisenhanslüke, C., Kassel University Press, Kassel, Germany, 2004, pp. 425–434.

  186. Hegger, J. and Rauscher, S., "UHPC in Composite Construction," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 545–552.

  187. Hegger, J., Rauscher, S., and Gallwoszus, J., "Modern Hybrid Structures Made of UHPC and High Strength Steel," Proceedings of the Third International fib Congress and Exhibition Incorporating the PCI Annual Convention and National Bridge Conference, Washington, DC, May 29–June 2, 2010, Compact Disc, Paper 52.

  188. Jungwirth, J. et al., "Utilization of UHPC in Composite Structures—Lightweight Composite Structures (LCS)," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 887–894.

  189. Kohlmeyer, C. et al., "Investigations on Embedded Shear Connectors for Lightweight Composite Structures," Proceedings of the Third International fib Congress and Exhibition Incorporating the PCI Annual Convention and National Bridge Conference, Washington, DC, May 29–June 2, 2010, Compact Disc, Paper 429.

  190. Fehling, E. and Ismail, M., "Experimental Investigations on UHPC Structural Elements Subject to Pure Torsion," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 501–508.

  191. Joh, C. et al., "Torsional Test of Ultra High Performance Fiber-Reinforced Concrete Square Members," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 509–516.

  192. Empelmann, M. and Oettel, V., "UHPFRC Box Girders Under Torsion," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 517–524.

  193. Graybeal, B., "Behavior of Field-Cast Ultra-High Performance Concrete Bridge Deck Connections Under Cyclic and Static Structural Loading," FHWA, U.S. Department of Transportation, Report No. FHWA-HRT-11-023, National Technical Information Service Accession No. PB2011-101995, 2010.

  194. Swenty, M. and Graybeal, B., "Influence of Differential Deflection on Staged Construction Deck-Level Connections," FHWA, U.S. Department of Transportation, Report No. FHWA-HRT-12-057, National Technical Information Service Accession No. PB2012-111528, 2012.

  195. Holschemacher, K., Weiße, D., and Klotz, S., "Bond of Reinforcement in Ultra High Strength Concrete," Proceedings of the International Symposium on Ultra High Performance Concrete, Ed., Schmidt, M., Fehling, E., and Geisenhanslüke, C., Kassel University Press, Kassel, Germany, 2004, pp. 375–387.

  196. Holschemacher, K., Weiße, D., and Klotz, S., "Bond of Reinforcement in Ultra High-Strength Concrete," Seventh International Symposium on the Utilization of High-Strength/High-Performance Concrete, Vol. I, Publication No. SP-228, Ed., Russell, H.G., American Concrete Institute, Farmington Hills, MI, 2005, pp. 513–528.

  197. Fehling, E., Lorenz, P., and Leutbecher, T., "Experimental Investigations on Anchorage of Rebars in UHPC," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 533–540.

  198. Hossain, K., et al., "Bond Strength and Development Length of GFRP Bars in Ultra-High Performance Concrete," Final report, Ontario Ministry of Transportation Research Project, Department of Civil Engineering, Ryerson University, Toronto, Canada, 2011.

  199. Graybeal, B., Field-Cast UHPC Connections for Modular Bridge Deck Elements, TechBrief, FHWA-HRT-11-022, Federal Highway Administration, McLean, VA, 2010.

  200. Ruiz, E.D. et al., "Preliminary Investigation Into the Use of UHPC in Prestressed Members," Proceedings of the PCI National Bridge Conference, October 22–24, 2007, Phoenix, AZ, Compact Disc, Paper 53.

  201. Ruiz, E.D. et al., "Transfer and Development Lengths of Prestressed Beams Cast With Ultra-High Performance Concrete," Proceedings of the PCI National Bridge Conference, October 4–7, 2008, Orlando, FL, Compact Disc, Paper 22.

  202. Bertram, G. and Hegger, J., "Bond Behavior of Strands in UHPC—Tests and Design," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 525–532.

  203. Graybeal, B., "UHPC for Structural Connections," ACI Convention Presentation: UHPC-Experience and Developments, October 22, 2012. Available at http://www.concrete.org/Convention/fall-Convention/PresentationDetail.asp?EventId=ZSESS14 [Cited December 14, 2012].

  204. Steinberg, E. and Lubbers, A., "Bond of Prestressing Strands in UHPC," Proceedings of the 3rd International Symposium on High Performance Concrete/PCI National Bridge Conference, October 19–22, 2003, Orlando, FL, Compact Disc, Paper 12.

  205. Lubbers, A.R., "Bond Performance Between Ultra-High Performance Concrete and Prestressing Strands," Master's Thesis, College of Engineering and Technology, Ohio University, 2003.

  206. Hegger, J. and Bertram, G., "Anchorage Behavior of Pretensioned Strands in Steel Fiber Reinforced UHPC," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 537–544.

  207. Chen, L. and Graybeal, B., "Finite Element Analysis of Ultra-High Performance Concrete: Modeling Structural Performance of an AASHTO Type II Girder and a 2nd Generation Pi-Girder," FHWA, U.S. Department of Transportation, Report No. FHWA-HRT-11-020, National Technical Information Service Accession No. PB2011-100864, 2010.

  208. Chen, L. and Graybeal, B., "Modeling Structural Performance of Ultra-High Performance Concrete I-Girders," ASCE Journal of Bridge Engineering. Vol. 17, No. 5, September–October 2012, pp. 754–764.

  209. Chen, L. and Graybeal, B., "Modeling Structural Performance of Second-Generation Ultrahigh Performance Concrete Pi-Girders," ASCE Journal of Bridge Engineering. Vol. 17, No. 4, July–August 2012, pp. 634–643.

  210. Gowripalan, N. and Gilbert, R.I., "Design Guidelines for Ductal Prestressed Concrete Beams," The University of New South Wales, Sydney, Australia, 2000.

  211. Walraven, J., "On the Way to International Design Recommendations for Ultra High Performance Fibre Reinforced Concrete," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 51–58.

  212. Australian Standard: Concrete Structures, AS3600-94 , Second Edition, Standards Association of Australia, Homebush, NSW, 1996.

  213. Standard Specifications for Concrete Structures , Japan Society of Civil Engineers, Tokyo, 2002.

  214. Resplendino, J., "State of the Art of Design and Construction of UHPFRC Structures in France," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 27–41.

  215. Standard Method of Test for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration, AASHTO Designation: T 277, Standard Specifications for Transportation Materials and Methods of Sampling and Testing, Part 2B—Tests, American Association of State Highway and Transportation Officials, Washington, DC, 2005.

  216. Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration, ASTM C1202, ASTM International, Volume 04.02, West Conshohocken, PA, 2012.

  217. Thomas, M. et al., "Marine Performance of UHPC at Treat Island," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 365–370.

  218. Standard Method of Test for Resistance of Concrete to Chloride Ion Penetration, AASHTO Designation: T 259, Standard Specifications for Transportation Materials and Methods of Sampling and Testing, Part 2—Tests, Twenty First Edition, American Association of State Highway and Transportation Officials, Washington, DC, 2002.

  219. Andrade, M.C., Frías, M., and Aarup, B., "Durability of Ultra High Strength Concrete: Compact Reinforced Composite (CRC)," Proceedings of the Fourth International Symposium on the Utilization of High-Strength/High-Performance Concrete, 29–31 May 1996, Paris, France, Ed., de Larrard, F. and Lacroix, R., Vol. 2, pp. 529–534.

  220. Piérard, J., Dooms, B., and Cauberg, N., "Evaluation of Durability Parameters of UHPC Using Accelerated Lab Tests," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 371–376.

  221. Graybeal, B.A., "Simultaneous Structural and Environmental Loading of an Ultra-High Performance Concrete Component," FHWA, U.S. Department of Transportation, Report No. FHWA-HRT-10-054. Available through National Technical Information Service at http://www.ntis.gov with Accession No. PB2010110331 [Cited November 23, 2011].

  222. Charron, J.-P., Denarié, E., and Brühwiler, E., "Permeability of Ultra High Performance Fiber Reinforced Concretes (UHPFRC) Under High Stresses," Materials and Structures, Vol. 40, No. 3, 2007, pp. 269–277.

  223. Standard Method of Test for Resistance of Concrete to Rapid Freezing and Thawing, AASHTO Designation: T 161, Standard Specifications for Transportation Materials and Methods of Sampling and Testing, Part 2A—Tests, American Association of State Highway and Transportation Officials, Washington, DC, 2008.

  224. Müller, C. et al, "Durability of Ultra-High Performance Concrete (UHPC)," Proceedings of the Third International fib Congress and Exhibition Incorporating the PCI Annual Convention and National Bridge Conference, Washington, DC, May 29–June 2, 2010, Compact Disc, Paper 135.

  225. Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals, ASTM C672, ASTM International, Volume 04.02, West Conshohocken, PA, 2012.

  226. Cwirzen, A., Habemehl-Cwirzen, K., and Penttala, V., "The Effect of Heat Treatment on the Salt Freeze-Thaw Durability of UHSC," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 221–230.

  227. Kosmatka, S.H. and Wilson, M.L., Design and Control of Concrete Mixtures, Fifteenth Edition, Engineering Bulletin 001, Portland Cement Association, 2011.

  228. Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method, ASTM C944, ASTM International, Volume 04.02, West Conshohocken, PA, 2012.

  229. Hime, W.G., "HPC Tests—Alkali-Silica Reactivity," HPC Bridge Views, Issue No. 36 November–December 2004, p. 3.

  230. Standard Test Method for Potential Alkali-Reactivity of Aggregates (Mortar-Bar Method), ASTM C1260, ASTM International, Volume 04.02, West Conshohocken, PA, 2007.

  231. Fire Resistance Tests—Elements of Building Construction , ISO 834, International Organization for Standardization, Geneva, Switzerland, 2012.

  232. Heinz, D., Dehn, F., and Urbonas, L., "Fire Resistance of Ultra High Performance Concrete (UHPC)—Testing of Laboratory Samples and Columns under Load," Proceedings of the International Symposium on Ultra High Performance Concrete, Ed., Schmidt, M., Fehling, E., and Geisenhanslüke, C., Kassel University Press, Kassel, Germany, 2004, pp. 703–715.

  233. Fire Behaviour of Building Materials and Building Components; Building Components; Definitions; Requirements and Tests, DIN 4102-2, Deutsches Institut für Normung E.V., Berlin, Germany, 1977.

  234. Way, R. and Wille, K., "Material Characterization of an Ultra High-Performance-Fibre Reinforced Concrete Under Elevated Temperatures," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 565–572.

  235. Hosser, D., Kampmeier, B., and Hollmann, D., "Behavior of Ultra High Performance Concrete (UHPC) in Case of Fire," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 573–582.

  236. Pimienta, P. et al., "Literature Review on the Behavior of UHPFRC at High Temperature," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 549–556.

  237. Bierwagen, D. and Abu-Hawash, A., "Ultra High Performance Concrete Highway Bridge," Proceedings of the 2005 Mid-Continent Transportation Research Symposium, Ames, IA, August 2005.

  238. Endicott, W.A., "A Whole New Cast," ASPIRE, Summer 2007, pp. 26–29. Available at http://www.aspirebridge.org [Cited November 23, 2011].

  239. Keierleber, B. et al., "FHWA, Iowa Optimize Pi Girder," ASPIRE, Winter 2010, pp. 24–26. Available at http://www.aspirebridge.org [Cited November 23, 2011].

  240. Shutt, C.A., "UHPC Joint Provides New Solutions," ASPIRE, Fall 2009, pp. 28–30. Available at http://www.aspirebridge.org. [Cited November 23, 2011].

  241. Royce, M.C., "Concrete Bridges in New York State," ASPIRE, Fall 2011, pp. 46–48. Available at http://www.aspirebridge.org [Cited November 23, 2011].

  242. Moore, B., "Little Cedar Creek Bridge—Big Innovation," ASPIRE, Spring 2012, p. 27. Available at http://www.aspirebridge.org [Cited April 20, 2012].

  243. Bornstedt, G. and Shike, C., "Connecting Precast Prestressed Concrete Bridge Deck Panels with Ultra High Performance Concrete," Proceedings of the PCI National Bridge Conference, October 22–26, 2011, Salt Lake City, UT, Compact Disc, Paper 106.

  244. Anon [Internet], "North American Ductal® Bridge Projects." Available at www.ductal-lafarge.com [Cited January 3, 2013].

  245. Perry, V., Scalzo, P., and Weiss, G., "Innovative Field Cast UHPC Joints for Precast Deck Panel Bridge Superstructures—CN Overhead Bridge at Rainy Lake, Ontario," Proceedings of the PCI National Bridge Conference, October 22–24, 2007, Phoenix, AZ, Compact Disc, Paper 3.

  246. Perry, V.H. and Seibert, P.J., "The Use of UHPFRC (Ductal®) for Bridges in North America: The Technology, Applicationsand Challenges Facing Commercialization," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 815–822. Also available at http://www.ductal-lafarge.com/SLib/17-UHPC%20Paper%20-%20FINAL.pdf [Cited November 23, 2011].

  247. Perry, V.H. and Seibert, P.J., "New Applications of Field Cast UHPC Connections for Precast Bridges," Proceedings of the PCI National Bridge Conference, October 22–26, 2011, Salt Lake City, UT, Compact Disc, Paper 101.

  248. Young W. F. and Bopari, J., "Whiteman Creek Bridge—A Synthesis of Accelerated Bridge Construction (ABC), Ultra High Performance Concrete (UHPC), and Fiber Reinforced Polymer Concrete (FRP)," Proceedings of the PCI National Bridge Conference, October 22–26, 2011, Salt Lake City, UT, Compact Disc, Paper 111.

  249. Young, W.F. et al., "Whitman Creek Bridge—A Synthesis of Ultra High Performance Concrete and Fiber Reinforced Polymers for Accelerated Bridge Construction," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 849–856.

  250. Keierleber, B. et al., "Design of Buchanan County, Iowa, Bridge, Using Ultra High-Performance Concrete and PI-Beam Cross Section," Proceedings of the PCI National Bridge Conference, October 4–7, 2008, Orlando, FL, Compact Disc, Paper 27.

  251. Graybeal, B., Construction of Field-Cast Ultra-High Performance Concrete Connections, TechNote, FHWA-HRT-12-038, Federal Highway Administration, McLean, VA, 2012.

  252. Freytag, B. et al., "WILD-Bridge Scientific Preparation for Smooth Realisation," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 881–888.

  253. Hecht, M., "Practical Use of Fibre-Reinforced UHPC in Construction—Production of Precast Elements for Wild-Brücke in Völkermarkt," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 889–896.

  254. Candrlic, V., Bleiziffer, J., and Mandic, A., "Bakar Bridge Designed in Reactive Powder Concrete," Proceedings of the Third International Arch Bridges Conference, 2001, Paris, France, Ed., Abdunur, C., pp. 695–700.

  255. Behloul, M. and Batoz, J.-F. "Ductal® Applications Over the Last Olympiad," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 855–862.

  256. Hajar, Z. et al., "Design and Construction of the World First Ultra-High Performance Concrete Road Bridges," Proceedings of the International Symposium on Ultra High Performance Concrete, Ed., Schmidt, M., Fehling, E., and Geisenhanslüke, C., Kassel University Press, Kassel, Germany, 2004, pp. 39–48.

  257. Resplendino, J., "Ultra-High Performance Concretes—Recent Realizations and Research Programs on UHPFRC Bridges in France," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 31–43.

  258. de Matteis, D. et al., "A Fifth French Bridge Including UHPFRC Components, the Widening of the Pinel Bridge, in Rouen, (France)," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 795–802.

  259. Behloul, M. et al., "Ductal® Pont du Diable Footbridge, France," Tailor Made Concrete Structures, Ed., Walraven, J. and Stoelhorst, D., 2008, pp. 335–340.

  260. Fehling, E. et al., "The `Gärtnerplatzbrücke' Design of First Hybrid UHPC-Steel Bridge across the River Fulda in Kassel, Germany," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 581–588.

  261. Fehling, E. et al., "Ultra High Performance Composite Bridge Across the River Fulda in Kassel—Conceptual Design, Design Calculations and Invitation to Tender," Proceedings of the International Symposium on Ultra High Performance Concrete, Ed., Schmidt, M., Fehling, E., and Geisenhanslüke, C., Kassel University Press, Kassel, Germany, 2004, pp. 69–75.

  262. Meda, A. and Rosati, G., "Design and Construction of a Bridge in Very High Performance Fiber-Reinforced Concrete," ASCE Journal of Bridge Engineering, Vol. 8, No.5, 2003, pp. 281–287.

  263. Buitelaar, P., "Heavy Reinforced Ultra High Performance Concrete," Proceedings of the International Symposium on Ultra High Performance Concrete, Ed., Schmidt, M., Fehling, E., and Geisenhanslüke, C., Kassel University Press, Kassel, Germany, 2004, pp. 25–35.

  264. Yuguang, Y., Walraven, J., and den Uijl, J., "Study on Bending Behavior of an UHPC Overlay on a Steel Orthotropic Deck," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 639–646.

  265. Kaptijn, N. and Blom, J., "A New Bridge Deck for the Kaag Bridges—The First CRC (Compact Reinforced Composite) Application in Civil Infrastructure," Proceedings of the International Symposium on Ultra High Performance Concrete, Ed., Schmidt, M., Fehling, E., and Geisenhanslüke, C., Kassel University Press, Kassel, Germany, 2004, pp. 49–57.

  266. Šajna, A., Denarié, E., and Bras, V., "Assessment of a UHPFRC Based Bridge Rehabilitation in Slovenia, Two Years After Application," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 937–944.

  267. Resplendino, J., "First Recommendations for Ultra-High-Performance Concretes and Examples of Application," Proceedings of the International Symposium on Ultra High Performance Concrete, Ed., Schmidt, M., Fehling, E., and Geisenhanslüke, C., Kassel University Press, Kassel, Germany, 2004, pp. 79–90.

  268. Brühwiler, E. and Denarié, E., "Rehabilitation of Concrete Structures Using Ultra-High Performance Fibre Reinforced Concrete," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 895–902.

  269. Rebentrost, M. and Wight, G., "Experience and Applications of Ultra-High Performance Concrete in Asia," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 19–30.

  270. Anon [Internet], "Shepherd's Creek Ductal Bridge, Australia," Ref: 1755. Available at http://www.vsl.com, System Products Technologies, Ductal®, References [Cited November 21, 2011].

  271. Cavill, B. and Chirgwin, G., "The World's First RPC Road Bridge Shepherds Gully Creek Bridge, NSW," Proceedings of the 21st Biennial Conference of Concrete Institute of Australia, Brisbane, Australia, 2003, pp. 89–98.

  272. Anon [Internet], "Ductal Panels for Southern Link Upgrade—Australia," Ref: 2691. Available at http://www.vsl.com, System Products Technologies, Ductal®, References [Cited April 13, 2012].

  273. Okuma, H. et al., "The First Highway Bridge Applying Ultra High Strength Fiber Reinforced Concrete in Japan," 7th International Conference on Short and Medium Span Bridges, Montreal, Canada, 2006.

  274. Matsubara et al., "Application of a New Type of Ultra High Strength Fiber Reinforced Concrete to a Prestressed Concrete Bridge," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 787–802.

  275. Resplendino, J. and Petitjean, J., "Ultra-High-Performance Concrete: First Recommendations and Examples of Application," Proceedings of the 3rd International Symposium on High Performance Concrete/PCI National Bridge Conference, October 19–22, 2003, Orlando, FL, Compact Disc, Paper 77.

  276. Tanaka, Y. et al., "Innovation and Application of UFC Bridges in Japan," Proceedings of the International Workshop on Ultra High Performance Fibre Reinforced Concrete—Designing and Building with UHPFRC: State of the Art Development, 17–19 November 2009, Marseille, France, AFGC/fib, Paper 3.1.4.

  277. Musha, H. et al., "Mikaneike Bridge—The First Continuous Girder Bridge Using Ultra-High Strength Fiber Reinforced Concrete," Journal of Prestressed Concrete, Japan, Vol. 49, No. 5, September–October, 2007, pp. 18–26.

  278. Lei, V.Y., "Construction of Malaysia's First 50-m-Long UHPdC Composite Road Bridge," Concrete Technology, Vol. 4, 2011, pp. 122–127.

  279. Anon [Internet], "Papatoetoe Ductal Footbridge—New Zealand," Ref: 1450. Available at http://www.vsl.com, System Products Technologies, Ductal®, References [Cited November 21, 2011].

  280. Astarlioglu, A., Krauthammer, T., and Felice, C., "State-of-the-Art Report on Fiber Reinforced Ultra-High Performance Concrete," University of Florida, Report CIPPS-TR-003-2010, July 2010.

  281. Parant, E. et al., "Strain Rate Effect on Bending Behavior of New Ultra-High-Performance Cement-Based Composite," ACI Materials Journal, Vol. 104, No. 5, September–October 2007, pp. 458–463.

  282. Ngo, T., Mendis, P., and Krauthammer, T., "Behavior of Ultrahigh-Strength Prestressed Concrete Panels Subjected to Blast Loading," Journal of Structural Engineering, Vol. 133, No. 11, 2007, pp. 1,582–1,590.

  283. Millard, A. et al, "Dynamic Enhancement of Blast-Resistant Ultra High Performance Fiber-Reinforced Concrete Under Flexural and Shear Loading," International Journal of Impact Engineering, Vol. 37, No. 4, 2010, pp. 405–413.

  284. Habel, K. and Gauvreau, P., "Response of Ultra-High Performance Fiber Reinforced Concrete (UHPFRC) to Impact and Static Loading," Cement and Concrete Composites, Vol. 30, No. 10, 2008, pp. 938–946.

  285. Millon, O. et al., "Failure Mechanisms of UHPC Components under Explosive Loading," Proceedings of the Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 583–591.

  286. Wu, C.et al., "Blast Testing of Ultra High Performance Fibre and FRP-Retrofitted Concrete Slabs," Engineering Structures, Vol. 31, No. 9, 2009, pp. 2,060–2,069.

  287. Rebentrost, M., and Wight, G., "Behaviour and Resistance of Ultra High Performance Concrete to Blast Effects," Proceedings of the Second International Symposium on Ultra-High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 735–742.

  288. Rebentrost, M. and Wight, G., "Investigation of UHPFRC Slabs Under Blast Loads," Proceedings of the International Workshop on Ultra High Performance Fibre Reinforced Concrete—Designing and Building with UHPFRC: State of the Art Development, 17–19 November 2009, Marseille, France, AFGC/fib, Paper 4.1.6.

  289. Nöldgen, M. et al, "Ultra High Performance Concrete Structures Under Aircraft Engineer Missile Impact," Proceedings of the Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press,, Kassel, Germany, 2012, pp. 593–600.

  290. Almansour, H. and Lounis Z., "Structural Performance of Precast Prestressed Bridge Girders Built With Ultra High Performance Concrete," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 823–830.

  291. Canadian Highway Bridge Design Code, CAN/CSA-S6-06, Canadian Standards Association, Mississauga, Ontario, 2006.

  292. Obata, H. et al., "Effect of Improved Interfacial Bond on Whitetopping Using Ultra High Strength Fiber Reinforced Concrete," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 243–250.

  293. Oesterlee, C., Sadouki, H., and Brühwiler, E., "Structural Analysis of a Composite Bridge Girder Combining UHPFRC and Reinforced Concrete," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 647–654.

  294. Schäfers, M. and Seim, W., "Development of Adhesive-Bound UHPC-Timber Composites," Proceedings of the Second International Symposium on Ultra High Performance Concrete, Ed., Fehling, E., Schmidt, M., and Stürwald. S., Kassel University Press, Kassel, Germany, 2008, pp. 259–266.

  295. Marchand, P. et al., "Modelling Flexural Tests on UHPFRC Thin-Walled Structures," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 757–764.

  296. Vande Voort, T., Suleiman, M., and Sritharan, S. "Design and Performance Verification of UHPC Piles for Deep Foundations," Final Report, Iowa Highway Research Board Project TR-558, Iowa State University, Ames, IA, 2008.

  297. Ibuk, H. and Beckhaus, K., "Ultra High Performance Concrete for Drill Bits in Special Foundation Engineering," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 807–810.

  298. Schmidt, M., Braun, T., and Möller, H., "Sewer Pipers and UHPC—Development of an UHPC With Earth-Moisture Consistency," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 833–840.

  299. Adam, T. and Ma, J., "Development of an Ultra-High Performance Concrete for Precast Spun Concrete Columns," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 841–848.

  300. Müller, C. et al., "Ultra-High Performance Spun Concrete Columns With High-Strength Reinforcement," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 733–740.

  301. Sritharan, S. et al., "Current Research on Ultra High Performance Concrete (UHPC) for Bridge Applications in Iowa," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 857–864.

  302. Shann, S.V. et al., "Application of Ultra-High Performance Concrete (UHPC) as a Thin-Topped Overlay for Concrete Bridge Decks," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials , Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 929–936.

  303. Schmidt, C. and Schmidt, M., "`Whitetopping' of Asphalt and Concrete Pavements with Thin Layers of Ultra-High-Performance Concrete—Construction and Economic Efficiency," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 921–927.

  304. Park, S.Y. et al., "Structural Performance of Prestressed UHPC Ribbed Deck for Cable-Stayed Bridge," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 873–880.

  305. Hoffmann, S. and Weiher, H., "Innovative Design of Bridge Bearings by the Use of UHPFRC," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 973–980.

  306. Randl, N. et al., "Study on the Application of UHPC for Precast Tunnel Segments," Proceedings of Hipermat 20123rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 981–988.

  307. Massicotte, B. and Boucher-Proulx, G., "Seismic Retrofitting of Bridge Piers with UHPFRC Jackets," Proceedings of the International Workshop on Ultra High Performance Fibre Reinforced Concrete—Designing and Building with UHPFRC: State of the Art Development , 17–19 November 2009, Marseille, France, AFGC/fib, Paper 5.1.1, 9 pp. Also Designing and Building with UHPFRC: State of the Art and Development, Ed., Resplendino, J. and Toutlemonde, F., pp. 531–540, Wiley-ISTE, London, 2010.

  308. AASHTO LRFD Bridge Construction Specifications , 3rd Edition, American Association of State Highway and Transportation Officials, Washington, DC, 2010.

  309. Ahlborn, T.M. and Steinberg, E.P., "An Overview of UHPC Efforts Through the Working Group in North America," Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Ed., Schmidt, M., Fehling, E., Glotzbach, C., Fröhlich, S., and Piotrowski, S., Kassel University Press, Kassel, Germany, 2012, pp. 43–50.

Return to top

Privacy Policy | Freedom of Information Act (FOIA) | Accessibility | Web Policies & Notices | No Fear Act | Report Waste, Fraud and Abuse | U.S. DOT Home | USA.gov | WhiteHouse.gov

Federal Highway Administration | 1200 New Jersey Avenue, SE | Washington, DC 20590 | 202-366-4000
Turner-Fairbank Highway Research Center | 6300 Georgetown Pike | McLean, VA | 22101