U.S. Department of Transportation
Federal Highway Administration
1200 New Jersey Avenue, SE
Washington, DC 20590
202-366-4000


Skip to content U.S. Department of Transportation/Federal Highway AdministrationU.S. Department of Transportation/Federal Highway Administration

Construction

<< Previous Contents  

Connection Details for PBES

Appendix F: References

  1. AASHTO LRFD Bridge Design Specifications, American Association of State Highway and Transportation Officials, Washington, D.C., Fourth Edition 2007.
  2. Decision-Making Framework for Prefabricated Bridge Elements and Systems (PBES), U.S. Department of Transportation, Federal Highway Administration, Publication Number FHWA-HIF-06-030, May 2006
  3. Manual on the Use of Self-Propelled Modular Transporters to Remove and Replace Bridges, U.S. Department of Transportation, Federal Highway Administration, Publication Number FHWA-HIF-07-022, June 2007
  4. Emulating Cast-in-Place Detailing in Precast Concrete Structures ACI-550.1 R01, The American Concrete Institute, 2001
  5. Development of Precast Bent Cap Systems for Seismic Regions, National Cooperative Highway Research Program, Project 12-74, 2007
  6. Building Code Requirements for Structural Concrete (ACI 318-03) and Commentary (ACI 318R-03), American Concrete Institute Committee 318, 2003.
  7. Tests on Re-Bar Splices in Reinforced Concrete Columns using NMB Splice Sleeves, Report Number NPD-024, Splice Sleeve Japan, LTD.
  8. ASTM C309 - 07 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete, ASTM International, West Conshohocken, PA
  9. ASTM C 1107/C 1107M REV A Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink), ASTM International, West Conshohocken, PA
  10. ASTM C 928 - Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repair, ASTM International, West Conshohocken, PA
  11. CRD C-621 - Army Corp of Engineers Specification for Non-Shrink Grout, U.S. Army Corps of Engineers, Concrete Research Division
  12. ASTM C 109/C 109M Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens), ASTM International, West Conshohocken, PA
  13. ASTM C 827 REV A Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens from Cementitious Mixtures, ASTM International, West Conshohocken, PA
  14. ASTM C 1090 Standard Test Method for Measuring Changes in Height of Cylindrical Specimens from Hydraulic-Cement Grout, ASTM International, West Conshohocken, PA
  15. ASTM D6449 - 99(2008) Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method), ASTM International, West Conshohocken, PA
  16. Tolerance Manual for Precast and Prestressed Concrete Construction, MNL 135- 00, Precast Prestressed Concrete Institute (PCI), Chicago, IL
  17. Manual for the Evaluation and Repair of Precast, Prestressed Concrete Bridge Products (MNL-37-06), Precast Prestressed Concrete Institute (PCI), Chicago, IL
  18. ANSI/AASHTO/AWS D1.5-96 Bridge Welding Code, American Association of State Highway and Transportation Officials, Washington, D.C and The American Welding Society, Inc., Miami, FL
  19. Abendroth, R.E., "Nominal Strength of Composite Prestressed Concrete Bridge Deck Panels," Journal of Structural Engineering, ASCE, Vol. 121, No. 2, February 1995, pp. 307-318
  20. Babaei, K., Fouladgar, A., and Nicholson, R., "Nighttime Bridge Deck Replacement with Full Depth Precast Concrete Panels at Route 7 over Route 50, Fairfax County, Virginia," Transportation Research Board, 80th Annual Meeting, January 7-11, 2001, Paper #01-0196, Washington, D.C.
  21. Badie, S.S.; Baishya, M.C, and Tadros, M.K. "NUDECK- An Efficient and Economical Precast Bridge Deck System", Prestressed/Precast Concrete Institute (PCI) Journal, September-October, Vol. 43, No. 5, 1998, pp. 56-74.
  22. Badie, S.S. and Tadros, M.K. "Full Depth Precast Concrete Bridge Deck Panel Systems" Report Number 584, National Cooperative Highway Research Program, Transportation Research Board, 2008
  23. Badie, S.S.; Baishya, M.C, and Tadros, M.K. "NUDECK- An Efficient and Economical Precast Bridge Deck System", Prestressed/Precast Concrete Institute (PCI) Journal, September-October, Vol. 43, No. 5, 1998, pp. 56-74.
  24. Badie, S. S., Tadros, M. K., Kakish, H. F., Splittgerber, D. L., and Baishya, M. C, "Large Studs for Composite Action in Steel Bridge Girders," American Society of Civil Engineering (ASCE), Bridge Journal, Vol. 7, No. 3, May/June 2002, pp. 195-203.
  25. Biswas, M., "Precast Bridge Deck Design Systems," PCI Journal, V. 31, No. 2, March-April 1986, pp. 40-94.
  26. Culmo, M.P., "Bridge Deck Rehabilitation Using Precast Concrete Slabs," Paper Number IBC-91-55, Eighth Annual International Bridge Conference, Pittsburgh, Pennsylvania, June 10-12, 1991.
  27. Issa, M.A., Idriss, A.T., Kaspar, I.I., and Khayyat, S.Y., "Full Depth Precast and Precast, Prestressed Concrete Bridge Deck Panels," PCI Journal, Vol. 40, No. 1, January-February 1995a, pp. 59-80.
  28. Issa, M.A., Yousif, A.A., Issa, M.A., Kaspar, I.I., and Khayyat, S.Y., "Field Performance of Full Depth Precast Panels in Bridge Deck Reconstruction," PCI Journal, Vol. 40, No. 3, May-June 1995d, pp. 82-108.
  29. Issa, M.A., Yousif, A.A., Issa, M.A., Kaspar, I.I., and Khayyat, S.Y., "Analysis of Full Depth Precast Concrete Bridge Deck Panels," PCI Journal, Vol. 43, No. 1, January- February 1998, pp. 74-85.
  30. Issa, M.A., Ralph Anderson, Thomas Domagalski, and Salah Khayyat, "Design Considerations of Full Depth Precast/Prestressed Concrete Bridge Deck Panels," Proceedings of the 1st annual Concrete Bridge Conference, October 6-9, 2002, p 20.
  31. Issa, Mohsen A., Patton, Thomas, Abdalla, Hiba, Yousif, Alfred, and Issa, Mahmoud A., "Composite Behavior of Shear Connections in Full-Depth Precast Concrete Bridge Deck Panels on Steel Stringers," PCI Journal, September/October 2003, vol. 48, no. 5, pp. 76-89.
  32. Menkulasi, F. and Roberts-Wollmann, C.L., "Behavior of Horizontal Shear Connections for Full-Depth Precast Concrete Bridge Decks on Prestressed I-Girders," PCI Journal, V. 50, No. 3., May/June 2005, pp. 60-73.
  33. Scholz, D.P., Wallenfelsz, J.A., Cintia, L. Roberts-Wollmann, C.A., "Recommendations for the Connection Between Full Depth Precast Bridge Deck Panel Systems and Precast I-Beams", Final Report Number VTRC 07-CR17, Virginia Transportation Research Council, Charlottesville, VA
  34. Tadros, M.K., Badie, S.S., and Kamel, M.R., "A New Connection Method for Rapid Removal of Bridge Decks," PCI Journal, May-June 2002, Vol. 47, No. 3, pp. 2-12.
  35. Tadros, M. K., and Baishya, M. C., "Rapid Replacement of Bridge Decks," Final Report, 12-41, National Cooperative Highway Research Program, Transportation Research Board, July 1997.
  36. Tadros, M. K., and Baishya, M. C., "Rapid Replacement of Bridge Decks," National Cooperative Highway Research Program, NCHRP Report 407, Washington, D.C., 1998.
  37. Lutz J. G., Scalia D. J., "Deck Widening and Replacement of Woodrow Wilson Memorial Bridge" PCI Journal, V. 29, No. 3, May-June, 1984, pp. 74-93.
  38. Merrill, Brian D, "Texas’ Use of Precast Concrete Stay-in-Place Forms for Bridge Decks", 2002 Concrete Bridge Conference, http://www.dot.state.tx.us/publications/bridge/precast_stay_forms.pdf
  39. Jones, H.L., Furr, H.L., "A Study of Prestressed Panels and Composite Action in Concrete bridges Made of Prestressed Beams, Prestressed Sub-Deck Panels, and Cast-in-place Deck", Research Project No. 2-5-70-145, Texas Highway Department
  40. Bieschke, L.A. and Klingner, R.E., "The Effects of Transverse Strand Extensions on the Behavior of Precast Prestressed Panel Bridges", Research Report 303-1F, Center for Transportation Research, The University of Texas at Austin, June 1982
  41. "Full Depth Precast Concrete Deck Slabs", PCINER-02-FDPCDS, Precast Prestressed Concrete Institute, Northeast Bridge Technical Committee, June 2002.
  42. "Steel Bridge Erection Guide Specification", The National Steel Bridge Alliance in conjunction with AASHTO, S10.1-2007 (AASHTO NSBASBEGS-1)
  43. "Prestressed Concrete Girder Continuity Connection", PCINER-98-PCGCC, Precast Prestressed Concrete Institute, Northeast Bridge Technical Committee, May 1998.
  44. "Guidelines for Accelerated Bridge Construction Using Precast/Prestressed Concrete Components", PCINER-06-ABC, Precast Prestressed Concrete Institute, Northeast Bridge Technical Committee, 2006
  45. "Steel Bridge Bearing Design and Detailing Guide", The National Steel Bridge Alliance in conjunction with AASHTO, G9.1-2004 (AASHTO NSBASBB-1)
  46. "Building Code Requirements for Structural Concrete - ACI 318", Appendix D, American Concrete Institute, Farmington Hills, MI
  47. Ross, H.E., Sickling, D.L., Zimmer, R.A., Michie, J.D., "Recommended Procedure for the Safety Performance Evaluation of Highway Features," National Cooperative Highway Research Program, NCHRP Report 350, Washington, D.C., 1993.
  48. ASTM A 123 - Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products, ASTM International, West Conshohocken, PA
  49. Matsumoto, E.E., Waggoner, M.C., Sumen, G., Kreger, M.E., Wood, S.L., Breen, J.E., "Development of a Precast Bent Cap System", Center for Transportation Research, The University of Texas at Austin, January 2001
  50. Precast Prestressed Concrete Piles, BM-20-04, Precast Prestressed Concrete Institute (PCI), Chicago, IL
  51. Endicott, W., "Precast Bridges Stand the Test of Time" PCI Ascent, Winter 1994, pp. 30-33.
  52. ASTM C1433 - Standard Specification for Manufacture of Precast Reinforced Concrete Box Culverts, Storm Drains, and Sewers, ASTM International, West Conshohocken, PA
<< Previous Contents  
Updated: 06/27/2017
Federal Highway Administration | 1200 New Jersey Avenue, SE | Washington, DC 20590 | 202-366-4000