Appendix G (continued)

<< Previous

Contents

Next >>

Construction Program Management and Inspection Guide

DIVISION OFFICE
NATIONAL ITS ARCHITECTURE AND STANDARDS CONFORMITY DOCUMENTATION CHECKLIST

Federal Project Number: __________

MUST SELECT ONE (CASE A OR CASE B)

Check box CASE A - A regional ITS architecture exists, or is under development for the region.

This is a project to study and/or design an ITS implementation that:
- Will accommodate interface requirements and information exchanges specified in the ITS regional architecture.
- Will use a systems engineering analysis commensurate with the project scope.
This project is an ITS deployment project that:
- Has been designed based on a systems engineering analysis commensurate with the project scope.
- Will deploy ITS elements (check if applicable).
- Will integrate ITS elements or systems (check if applicable).
- Will deploy communication infrastructure that will allow integration to occur (check if applicable).
This project will use the ITS standards and interoperability tests that have been adopted by USDOT. (Currently, no ITS standards have been adopted by USDOT.)

Projects using discretionary ITS funds designated by Congress must agree to consider using/testing appropriate emerging Standards that have been approved by the Standards Development Organizations.

CASE B - A regional ITS architecture does not exist.

This is the first ITS project for this region. A commitment needs to made to develop an ITS architecture for this region within the next four years.
This is a major ITS project to study and/or design an ITS implementation that:
- Will use a systems engineering approach to arrive at the final design.
- Will develop a project level ITS architecture to guide the development of this project and serve as a baseline for the development of a regional ITS architecture for the area.
This project is an ITS deployment project that:
- Has been designed based on a systems engineering analysis commensurate with the project scope.
- Will deploy ITS elements (check if applicable).
- Will integrate ITS elements or systems (check if applicable).
- Will deploy communication infrastructure that will allow integration to occur (check if applicable).
This project will use the ITS standards and interoperability tests that have been adopted by USDOT. (Currently, no ITS standards have been adopted by USDOT.)