Synthesis and Evaluation of The Service Limit State of Engineered Fills for Bridge Support

REFERENCES

1. Mertz, D. (2012). Steel Bridge Design Handbook: Limit States, Report No. FHWA-IF-12-052-Vol.10, Office of Bridge Technology, Federal Highway Administration, Washington, DC.
   
   
2. DiMillio, A.F. (1982). Performance of Highway Bridge Abutments on Spread Footings on Compacted Fill, Report No. FHWA RD-81-184, Federal Highway Administration, Washington, DC.
   
   
3. Gifford, D.G., Kraemer, S.R., Wheeler, J.R., and McKown, A.F. (1987). Spread Footings for Highway Bridges, Report No. FHWA RD-86-185, Federal Highway Administration, Washington, DC.
   
   
4. Zevgolis, I. and Bourdeau, P.L. (2007). Mechanically Stabilized Earth Wall Abutments for Bridge Support, Report No. FHWA/IN/JTRP-2006/38, Joint Transportation Research Program, Indiana Department of Transportation and Purdue University, West Lafayette, IN.
   
   
5. Abu-Hejleh, N.M., Alzamora, D., Mohamed, K., Saad, T., and Anderson, S. (2014). Implementation Guidance for Using Spread Footings on Soils to Support Highway Bridges, Report No. FHWA-RC-14-001, Federal Highway Administration Resource Center, Matteson, IL.
   
   
6. Samtani, N.C. and Nowatzki, E.A. (2006a). Soils and Foundations Reference Manual: Volumes I, Report No. FHWA-NHI-06-088, Federal Highway Administration, Washington, DC.
   
   
7. Samtani, N.C., Nowatzki, E.A., and Mertz, D.R. (2010). Selection of Spreading Footings on Soils to Support Highway Bridge Structures, Report No. FHWA-RC/TD-10-001, Federal Highway Administration, Washington, DC.
   
   
8. AASHTO. (2014). AASHTO LRFD Bridge Design Specifications, 7th Edition, American Association of State Highway and Transportation Officials, Washington, DC.
   
   
9. AASHTO. (2008). Manual for Bridge Evaluation, American Association of State Highway and Transportation Officials, Washington, DC.
   
   
10. Modjeski and Masters, Inc., University of Nebraska, Lincoln, University of Delaware, and NCS Consultants, LLC. (2015). Bridges for Service Life Beyond 100 Years: Service Limit State Design, SHRP2 Report S2-R19B-RW-1, Transportation Research Board of National of Academies, Washington, DC.
    
    
11. Paikowsky, S.G., Lesny, K., Amatya, S., Kisse, A., Muganga, R., and Canniff, M.Â. (2010). LRFD Design and Construction of Shallow Foundations for Highway Bridge Structures, NCHRP Report No. 651 for Project NCHRP 24-31, National Cooperative Highway Research Program, Washington, DC.
    
    
12. Kimmerling, R.E. (2002). Geotechnical Engineering Circular No. 6: Shallow Foundations, Report No. FHWA-SA-02-054, Federal Highway Administration, Washington, DC.
    
    
13. American Association of State and Highway Transportation Officials. (2015). “AASHTO T27-14: Sieve Analysis of Fine and Coarse Aggregates,” Standard Specifications for Transportation Materials and Methods of Sampling and Testing, 35th Edition and AASHTO Provisional Standards, 2015 Edition. Washington, DC.
    
    
14. American Association of State and Highway Transportation Officials. (2015). “AASHTO T90-15: Determining the Plastic Limit and Plasticity Index of Soils,” Standard Specifications for Transportation Materials and Methods of Sampling and Testing, 35th Edition and AASHTO Provisional Standards, Washington, DC.
    
    
15. American Association of State and Highway Transportation Officials. (2015). “AASHTO T104-99 (2011): Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate,” Standard Specifications for Transportation Materials and Methods of Sampling and Testing, 35th Edition and AASHTO Provisional Standards, Washington, DC.
    
    
16. American Association of State and Highway Transportation Officials. (2015). “AASHTO T99-15: Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop,” Standard Specifications for Transportation Materials and Methods of Sampling and Testing, 35th Edition and AASHTO Provisional Standards, Washington, DC.
    
    
17. American Association of State and Highway Transportation Officials. (2015). “AASHTO T180-15: Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop,” Standard Specifications for Transportation Materials and Methods of Sampling and Testing, 35th Edition and AASHTO Provisional Standards, Washington, DC.
    
    
18. Samtani, N.C. and Nowatzki, E.A. (2006b). Soils and Foundations Reference Manual: Volume II, Report No. FHWA-NHI-06-089, Federal Highway Administration, Washington, DC.
    
    
19. Vidal, H. (1969). “The Principle of Reinforced Earth,” Highway Research Record 282, 1–16, Transportation Research Board, Washington, DC.
    
    
20. Hanna, B.E. (1977). “The Use of Reinforced Earth Walls as Bridge Abutments,” Proceedings of the 28th Annual Highway Geology Symposium, 57–60, South Dakota School of Mines & Technology, Rapid City, SD.
    
    
21. Adams, M., Nicks, J., Stabile, T., Wu, J., Schlatter, W., and Hartmann, J. (2011a). Geosynthetic Reinforced Soil Integrated Bridge System Synthesis Report, Report No. FHWA-HRT-11-027, Federal Highway Administration, Washington, DC.
    
    
22. Adams, M. (1997). “Performance of a Pre-Strained Geosynthetic Reinforced Soil Bridge Pier,” International Symposium on Mechanically Stabilized Backfill, 35–53.
    
    
23. Wu, J.T.H., Ketchart, K., and Adams, M. (2001). GRS Bridge Piers and Abutments, Report No. FHWA-RD-00-038, Federal Highway Administration, Washington, DC.
    
    
24. Sun, C. and Graves, C. (2013). Evaluation of Mechanically Stabilized Earth (MSE) Walls for Bridge Ends in Kentucky: What Next?, KTC-13-11/SPR443-12-1F, Kentucky Transportation Center, University of Kentucky, Lexington, KY.
    
    
25. Abernathy, C. (2013). Geosynthetic Reinforced Soil—Integrated Bridge System (GRS-IBS), Experimental Projects Construction Report, Montana Department of Transportation, Helena, MT.
    
    
26. Talebi, M., Meehan, C., Cacciola, D., and Becker, M. (2014). “Design and Construction of a Geosynthetic Reinforced Soil Integrated Bridge System,” Proceedings of GeoCongress 2014, GSP No. 234, American Society of Civil Engineers, Atlanta, GA.
    
    
27. Adams, M. and Nicks, J. (2014). “Secondary Settlement of Geosynthetic Reinforced Soil Piers: Preliminary Results,” Proceedings of GeoCongress 2014, GSP No. 234, 4,228–4,237, American Society of Civil Engineers, Atlanta, GA.
    
    
28. Warren, K., Whelan, M., Hite, J., and Adams, M. (2014). “Three Year Evaluation of Thermally Induced Strain and Corresponding Lateral End Pressures for a GRS IBS in Ohio,” Proceedings of GeoCongress 2014, GSP No. 234, American Society of Civil Engineers, Atlanta, GA.
    
    
29. Budge, A., Dasenbrock, D., Mattison, D., Bryant, G., Grosser, A., Adams, M., and Nicks, J. (2014). “Instrumentation and Early Performance of a Large Grade GRS-IBS Wall,” Proceedings of GeoCongress 2014, GSP No. 234, American Society of Civil Engineers, Atlanta, GA.
    
    
30. Tatsuoka, F. (2008) “Recent Practice and Research of Geosynthetic-Reinforced Earth Structures in Japan,” Journal of GeoEngineering, 3(3), 77–100.
    
    
31. Kempton, G., Özçelik, H., Naughton, P., Mum, N., and Dundar, F. (2008). The Long Term Performance of Polymeric Reinforced Walls Under Static and Seismic Conditions, Fourth European Geosynthetics Conference, Paper No. 181, Edinburgh, UK.
    
    
32. Adams, M., Nicks, J., Stabile, T., Wu, J., Schlatter, W., and Hartmann, J. (2011b). Geosynthetic Reinforced Soil Integrated Bridge System Interim Implementation Guide, Report No. FHWA-HRT-11-026, Federal Highway Administration, Washington, DC.
    
    
33. Cheney, R.S. and Chassie, R.G. (2000). Soils and Foundation Workshop Reference Manual, Publication No. FHWA NHI-00-045, Federal Highway Administration, Washington, DC.
    
    
34. Anderson, P.L. and Brabant, K. (2010). Increased Use of MSE Abutments, Association for Metallically Stabilized Earth, Reston, VA. Obtained from: http://amsewalls.org/technical_papers.html. Site last accessed November 11, 2015.
    
    
35. Elias, V. and Christopher, B.R. (1998). Mechanically Stabilized Earth Walls and Reinforced Soil Slopes Design and Construction Guidelines, FHWA Report No. FHWA-SA-96-071, Federal Highway Administration, Washington, DC.
    
    
36. Elias, V., Christopher, B.R., and Berg, R.R. (2001). Mechanically Stabilized Earth Walls and Reinforced Soil Slopes Design and Construction Guidelines, FHWA Report No. FHWA-NHI-00-043, Federal Highway Administration, Washington, DC.
    
    
37. Berg, R.R., Christopher, B.R., and Samtani, N.C. (2009). Design of Mechanically Stabilized Earth Walls and Reinforced Soil Slopes—Volume I,Publication No. FHWA-NHI-10-024, National Highway Institute, Federal Highway Administration, Washington, DC.
    
    
38. Koerner, R.M. and Soong, T-Y. (2001), “Geosynthetic Reinforced Segmental Retaining Walls,” Geotextiles and Geomembranes, 19(6), 359–386.
    
    
39. National Concrete Masonry Association. (1997). Design Manual for Segmental Retaining Walls, Collin, J.G. (Ed.), 289, Herndon, VA.
    
    
40. Munfakh, G., Arman, A., Collin, J.G., Hung, J.C., and Brouillette, R.P. (2001). Shallow Foundations Reference Manual, Report No. FHWA-NHI-01-023, Federal Highway Administration, Washington, DC.
    
    
41. Adams, M. and Collin, J. (1997). “Large Model Spread Footing Load Tests on Geosynthetic Reinforced Soil Foundations,” Journal of Geotechnical and Geoenvironmental Engineering, 123(1), 66–72.
    
    
42. Nicks, J.E., Adams, M.T., Ooi, P.S.K., and Stabile, T. (2013). Geosynthetic Reinforced Soil Performance Testing—Axial Load Deformation Relationships, Report No. FHWA-HRT-13-066, Federal Highway Administration, Washington, DC.
    
    
43. Moulton, L.K., Ganga Rao, H.V.S., and Halvorsen, G.T. (1982). Tolerable Movement Criteria for Highway Bridges, Report No. FHWA/RD-81/162, Federal Highway Administration, Washington, DC.
    
    
44. Moulton, L.K., Ganga Rao, H.V.S., and Halvorsen, G.T. (1985). Tolerable Movement Criteria for Highway Bridges, Report No. FHWA/RD-85/107, Federal Highway Administration, Washington, DC.
    
    
45. Barker, R.M., Duncan, J.M., Rojiani, K.B., Ooi, P.S.K., Tan, C.K., and Kim, S.G. (1991). Manuals for the Design of Bridge Foundations, NCHRP Report 343, National Cooperative Highway Research Program, Washington, DC.
    
    
46. Washington State Department of Transportation. (2014). Geotechnical Design Manual, WSDOT, Tumwater, WA.
    
    
47. Arizona Department of Transportation. (2009). Bridge Design Guidelines, AZDOT, Phoenix, AZ.
    
    
48. Wahls, H. (1983). NCHRP Synthesis of Highway Practice Report 107: Shallow Foundations for Highway Structures, National Cooperative Highway Research Program, Washington, DC.
    
    
49. Bozozuk, M. (1978). “Bridge Foundations Move,” Transportation Research Record 678, 17–21, Transportation Research Board, Washington, DC.
    
    
50. Walkinshaw, J.L. (1978). “Survey of Bridge Movements in the Western United States,” Transportation Research Record 678, 6–11, Transportation Research Board, Washington, DC.
    
    
51. Wahls, H.E. (1990). Design and Construction of Bridge Approaches, NCHRP Synthesis of Highway Practice 159, 45, Transportation Research Board, Washington, DC.
    
    
52. AASHTO. (2002). Standard Specifications for Highway Bridges, 17th Ed., American Association of State Highway and Transportation Officials, Washington, DC.
    
    
53. Fragaszy, R.J. and Lawton, E. (1984). “Bearing Capacity of Reinforced Sand Subgrades,” Journal of Geotechnical Engineering, 110(10), 1,500–1,507.
    
    
54. Basudhar, P.K., Saha, S., and Deb, K. (2007). “Circular Footings Resting on Geotextile-Reinforced Sand Bed,” Geotextiles and Geomembranes, 25, 377–384.
    
    
55. Omar, M.T., Das, B.M., Puri, V.K., and Yen, S.C. (1993). “Ultimate Bearing Capacity of Shallow Foundations on Sand with Geogrid-Reinforcement,” Canadian Geotechnical Journal, 30, 545–549.
    
    
56. Chen, Q., Abu-Farsakh, M.Y., Sharma, R., and Zhang, X. (2007). “Laboratory Investigation of Behavior of Foundations on Geosynthetic-Reinforced Clayey Soil,” Transportation Research Record 2004, 28–38, Transportation Research Board, Washington, DC.
    
    
57. ASTM D 1196-93. (2004). “Standard Test Method for Nonrepetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements,” Book of Standards Volume 04.08, ASTM International, West Conshohocken, PA.
    
    
58. Das, B.M., Shin, E.C., and Omar, M.T. (1994). “The Bearing Capacity of Surface Strip Foundations on Ggeogrid-Reinforced Sand and Clay—Comparative Study,” Geotechnical and Geological Engineering, 12(1), 1–14.
    
    
59. Phanikumar, B.R., Prasad, R., and Singh, A. (2009). “Compressive Load Response of Geogrid-Reinforced Fine, Medium and Coarse Sands,” Geotexiles and Geomembranes, 27, 183–186.
    
    
60. Huang, C.C. and Tatsuoka, F. (1990). “Bearing Capacity of Reinforced Horizontal Sandy Ground,” Geotextiles and Geomembranes, 9(1), 51–82.
    
    
61. Latha, G.M. and Somwanshi, A. (2009). “Bearing Capacity of Square Footings on Geosynthetic Reinforced Sand,” Geotexiles and Geomembranes, 27, 281–294.
    
    
62. Elton, D.J. and Patawaran, M.A. (2004). “Mechanically Stabilized Earth Reinforcement Tensile Strength from Tests of Geotextile-Reinforced Soil,” Transportation Research Record 1868, 81–88, Transportation Research Board, Washington, DC.
    
    
63. Abu-Hejleh, N., Wang, T., and Zornberg, J.G. (2000). “Performance of Geosynthetic- Reinforced Walls Supporting Bridge and Approaching Roadway Structures,” Advances in Transportation and Geoenvironmental Systems Using Geosynthetics, ASCE/Geotechnical Special Publication No. 103, 218–243.
    
    
64. Abu-Hejleh, N., Zornberg, J.G., Wang, T., and Watcharamonthein, J. (2002). “Monitored Displacements of Unique Geosynthetic-Reinforced Soil Bridge Abutments,” Geosynthetics International, 9(1), 71–95.
    
    
65. ASTM D 2487. (2011). “Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System,” Book of Standards Volume 04.08, ASTM International, West Conshohocken, PA.
    
    
66. American Association of State and Highway Transportation Officials. (2015). “AASHTO M145-91 (2012): Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes,” Standard Specifications for Transportation Materials and Methods of Sampling and Testing, 35th Edition and AASHTO Provisional Standards, Washington, DC.
    
    
67. Das, B.M. and Omar, M.T. (1994). “The Effects of Foundation Width on Model Tests for the Bearing Capacity of Sand with Geogrid Reinforcement,” Geotechnical and Geological Engineering, 12(2), 133–141.
    
    
68. Mandal, J.N. and Sah, H.S. (1992). “Bearing Capacity Tests on Geogrid-Reinforced Clay,” Geotexiles and Geomembranes, 11, 327–333.
    
    
69. Binquet, J. and Lee, K.L. (1975). “Bearing Capacity Tests on Reinforced Earth Slabs,”Journal of the Geotechnical Engineering Division,101(12), 1,241–1,255.
    
    
70. Helwany, S.M.B, Wu, J.T.H., and Kitsabunnarat, A. (2007). “Simulating the Behavior of GRS Bridge Abutments,” Journal of Geotechnical and Geoenvironmental Engineering, 133(10), 1,229–1,240.
    
    
71. Hatami, K. and Bathurst, R.J. (2005). “Development and Verification of a Numerical Model for the Analysis of Geosynthetic-Reinforced Soil Segmental Walls Under Working Stress Conditions,” Canadian Geotechnical Journal, 42(4), 1,066–1,085.
    
    
72. Skinner, G.D. and Rowe, R.K. (2003). “Design and Behavior of Geosynthetic Reinforced Soil Walls Constructed on Yielding Foundations,” Geosynthetics International, 10(6), 200–214.
    
    
73. Helwany, S.M.B., Reardon, G., and Wu, J.T.H. (1999). “Effects of Backfill on the Performance of GRS Retaining Walls,” Geotextiles and Geomembranes, 17(1), 1–16.
    
    
74. Wu, J.T.H., Pham, T.Q., and Adams, M.T. (2013). Composite Behavior of Geosynthetic Reinforced Soil Mass, Report No. FHWA-HRT-10-077, Washington, DC.
    
    
75. Gotteland, P., Gourc, J.P., and Villard, P. (1997) “Geosynthetic Reinforced Structures as Bridge Abutment: Full Scale Experimentation and Comparison with Modelisations,” International Symposium on Mechanically Stabilized Backfill, 25–34.
    
    
76. Bathurst, R.J., Nernheim, A., Walters, D.L., Allen, T.M., Burgess, P., and Saunders, D.D. (2009). “Influence of Reinforcement Stiffness and Compaction on the Performance of Four Geosynthetic Reinforced Soil Walls,” Geosynthetics International, 16(1), 43–59.
    
    
77. Tatsuoka, F., Tateyama, M., and Murata, O. (1989). “Earth Retaining Wall with a Short Geotextile and a Rigid Facing,” Proceedings of the 12th International Conference on Soil Mechanics and Foundation Engineering 2, 1,311–1,314, Rio de Janeiro, Brazil.
    
    
78. Tateyama, M. (1996). Reinforced-Soil Retaining Wall Soil with Full-Height Rigid Facing and its Appliance, Doctoral Thesis, University of Tokyo, Japan.
    
    
79. Cao, Y.B. and Peng, F.L. (2011). “Numerical Study on Effects of the Number of Reinforcement Layers for Reinforced-Sand Retaining Wall,”Geo-Frontiers 2011 Advances in Geotechnical Engineering, 3,505–3,515, American Society of Civil Engineers, Atlanta, GA.
    
    
80. Olson, S.M., Holloway, K.P., Buenker, J.M., Long, J.H., and LaFave, J.M. (2013). Thermal Behavior of IDOT Integral Abutment Bridges and Proposed Design Modifications, Illinois Center for Transportation Research Report, ICT-12-022, University of Illinois at Urbana-Champaign, Champaign, IL.
    
    
81. Kim, J.S. and Barker, R.M. (2002). “Effect of Live Load Surcharge on Retaining Walls and Abutments,” Journal of Geotechnical and Geoenvironmental Engineering, 128(10), 803–813.
    
    
82. Esmaeili, M. and Fatollahzadeh, A. (2013). “Effect of Train Live Load on Railway Bridge Abutments,” Journal of Bridge Engineering, 18(6), 576–583.
    
    
83. Boussinesq, J.V. (1885). “Sur la résistance qu’oppose un fluide indéfini au repos, sans pesanteur, au mouvement varié d’une sphère solide qu’il mouille sur toute sa surface, quand les vitesses restent bien continues et assez faibles pour que leurs carrés et produits soient négligeables.” Comptes Rendu de l'Academie des Sciences, 100, 935–937.
    
    
84. Westergaard, H.M. (1938). “A Problem of Elasticity Suggested by a Problem in Soil Mechanics; Soft Material Reinforced by Numerous Strong Horizontal Sheets,” Mechanics of Solids, Stephen Timoshenko 60th Anniversary Volume, 268-277, MacMillan Co., New York, NY.
    
    
85. Allen, T.M., Christopher, B.R., and Holtz, R.D. (1991). “Performance of a 12.6-m-High Geotextile Wall in Seattle, Washington,” Proceedings of the International Symposium on Geosynthetic-Reinforced Soil Retaining Walls, 81–100, Netherlands.
    
    
86. Bathrust, R.J., Karpurapu, R., and Jarrett, P.M. (1992). “Finite Element Analysis of a Geogrid Reinforced Soil Wall,” Grouting, Soil Improvement and Geosynthetics, 1,213–1,224, American Society of Civil Engineers, Atlanta, GA.
    
    
87. Fishman, K.L., Desai, C.S., and Sogge, R.L. (1993). “Field Behavior of Instrumented Geogrid Soil Reinforced Wall,” Journal of Geotechnical Engineering, 119(8), 1,293–1,307.
    
    
88. Zornberg, J.G. and Mitchell, J.K. (1994). “Finite Element Prediction of the Performance of an Instrumented Geotextile-Reinforced Wall,” Proceedings of the 8th International Conference of the International Association for Computer Methods and Advances in Geomechanics, 1,433–1,438, Morgantown, WV.
    
    
89. Christopher, B.R., Gill, S.A., Giroud, J-P., Juran, I., Mitchell, J.K., Schlosser, F., and Dunnicliff, J. (1990). Reinforced Soil Structures Volume 1: Design and Construction Guidelines, Report No. FHWA-RD- 89-043, Federal Highway Administration, Washington, DC.
    
    
90. Rowe, R.K. and Ho, S.K. (1993). “Continuous Panel Reinforced Soil Walls on Rigid Foundations,” Journal of Geotechnical and Geoenvironmental Engineering, 123(10), 912–920.
    
    
91. Das, B. (2013) Elastic Settlement of Shallow Foundations on Granular Soil: A Critical Review, California State University, Sacramento, CA. Obtained from: http://gle.wisc.edu/wp-content/uploads/2013/07/Elastic-Settlement-Shallow-Foundations_A-Critical-Review-2.pdf. Site last accessed November 11, 2015.
    
    
92. Schmertmann, J.H. (1970). “Static Cone to Compute Static Settlement Over Sand,” Journal of Soil Mechanics & Foundations Division, 96(3), 1,011–1,043.
    
    
93. Schmertmann, J.H., Hartman, J.P., and Brown, P.R. (1978). “Improved Strain Influence Factor Diagrams,” Journal of the Geotechnical Engineering Division, 104(GT8), 1,131–1,135.
    
    
94. Hough, B.K. (1959). “Compressibility as Basis for Soil Bearing Value,” Journal of the Soil Mechanics and Foundations Division, 85(SM4, Part 1), 11–39.
    
    
95. Peck, R.B. and Bazaraa, A.R.S.S. (1969). “Discussion of Paper by D’Appolonia et al.,” Journal of the Soil Mechanics and Foundations Division, 95(3), 305–309.
    
    
96. Burland, J.B. and Burbidge, M.C. (1985). “Settlement of Foundations on Sand and Gravel,” Proceedings of the Institution of Civil Engineers, 78(1), 1,325–1,381.
    
    
97. D’Appolonia, D.J., D’Appolonia, E.E., and Brissette, R.F. (1968). “Settlement of Spread Footings on Sand,” Journal of the Soil Mechanics and Foundations Division, 94(SM3), 735–760.
    
    
98. D’Appolonia, D.J., D’Appolonia, E.E., and Brissette, R.F. (1970). “Closure to Discussions on ‘Settlement of Spread Footings on Sand,’” Journal of the Soil Mechanics and Foundations Division, 96(SM2), 754–761.
    
    
99. Terzaghi, K. and Peck, R.B. (1948). Theoretical Soil Mechanics, 2nd Ed., John Wiley & Sons, New York, NY.
    
    
100. Christian, J.T. and Carrier, W.D. (1978). “Janbu, Bjerrum and Kjaernsli’s Chart Reinterpreted,” Canadian Geotechnical Journal, 15, 123–128.
     
     
101. Crouse, P.E. and Wu, J.T.H. (1996). Long-Term Performance of GRS Retaining Walls, Research Report, Department of Civil Engineering, University of Colorado at Denver, Denver, CO.
     
     
102. Wu, J.T.H. (2001). Revising the AASHTO Guidelines for Design and Construction of GRS Walls, Report CDOT-DTD-R-2001-16, University of Colorado at Denver, Denver, CO.
     
     
103. Terzaghi, K., Peck, R.B., and Mesri, G. (1996). Soil Mechanics in Engineering Practice, Third Ed., John Wiley & Sons, New York, NY.
     
     
104. Briaud, J-L. and Garland, E. (1985). “Loading Rate Method for Pile Response in Clay,” Journal of Geotechnical Engineering, 111(3), 319–335.
     
     
105. Briaud, J-L. (2007). “Spread Footings in Sand: Load Settlement, Curve Approach,” Journal of Geotechnical and Geoenvironmental Engineering, 133(8), 905–920.
     
     
106. Briaud, J-L. and Gibbens, R.M. (1999). “Behavior of Five Large Spread Footings in Sand,” Journal of Geotechnical Engineering, 125(9), 787–796.
     
     
107. Gibson, R.E. (1967). “Some Results Concerning Displacements and Stresses in a Non-Homogeneous Elastic Half Space,” Geotechnique, 17, 58–67.
     
     
108. Giroud, J.P. (1989). Geotextile Engineering Workshop-Design Examples, Report No. FHWA HI-89-002, Federal Highway Administration, Washington, DC.
     
     
109. Wu, J.T.H. (1994). Design and Construction of Low Cost Retaining Walls: The Next Generation in Technology, Report No. CTI-UCD-1-94, Colorado Transportation Institute, Denver, CO.
     
     
110. Jewell, R.A. (1988). “Reinforced Soil Wall Analysis and Behavior,” The Application of Polymeric Reinforcement in Soil Retaining Structures, NATO Advanced Research Workshop, Kluwer, Netherlands.
     
     
111. Jewell, R.A. and Milligan, G.W. (1989). “Deformation Calculation for Reinforced Soil Walls,” Proceedings of the 12th International Conference on Soil Mechanics and Foundation Engineering, 1,259–1,262, Rio de Janeiro, Brazil.
     
     
112. DeBeer, E. (1948). “Settlement Records of Bridges Founded on Sand,” Proceedings of the Second International Conference on Soil Mechanics and Foundation Engineering,2, 111.
     
     
113. Bergdahl, V. and Ottosson, E. (1982). “Calculation of Settlements on Sands from Field Test Results,” Proceedings of the Second European Symposium on Penetration Testing, 1, 229–234.
     
     
114. DeBeer, E.E. and Martens, A. (1956). “Discussion of ‘Penetration Tests and Bearing Capacity of Cohesionless Soils by GG Meyerhof,’”Journal of the Soil Mechanics and Foundations Division, 1,095–1,097.
     
     
115. Holtz, R.D. and Lee, W.F. (2002). Internal Stability Analysis of Geosynthetic Reinforced Retaining Walls, Report No. WA-RD 532.1, Washington State Transportation Center, Seattle, WA.
     
     
116. Ketchart, K. and Wu, J.T.H. (1997). “Performance of Geosynthetic-Reinforced Soil Bridge Pier and Abutment, Denver, Colorado, USA,” International Symposium on Mechanically Stabilized Backfill, 101–116.
     
     
117. Bueno, B.S., Benjamim, C.V.S., and Zornberg, J.G. (2005). “Field Performance of a Full-Scale Retaining Wall Reinforced with Nonwoven Geotextiles,” Proceedings of Geo-Frontier 2005, Austin, TX.
     
     
118. Hatami, K. and Bathurst, R.J. (2006a). “A Numerical Model for Reinforced Soil Segmental Walls Under Surcharge Loading,” Journal of Geotechnical and Geoenvironmental Engineering, 132(6), 673–684.
     
     
119. Benjamim, C.V.S., Bueno, B.S., and Zornberg, J.G. (2007). “Field Monitoring Evaluation of Geotextile-Reinforced Soil-Retaining Walls,” Geosynthetics International, 14(2), 100–118.
     
     
120. Benigni, C., Bosco, G., Cazzuffi, D., and Col, R.D. (1996). “Construction and Performance of an Experimental Large Scale Wall Reinforced with Geosynthetics,” Earth Reinforcement, 1, 315–320.
     
     
121. Basudhar, P.K., Dixit, P.M., Gharpure, A., and Deb, K. (2008). “Finite Element Analysis of Geotextile-Reinforced Sand-Bed Subjected to Strip Loading,” Geotextiles and Geomembranes, 26, 91–99.
     
     
122. Rowe, R.K. and Skinner, G.D. (2001). “Numerical Analysis of Geosynthetic Reinforced Retaining Wall Constructed on a Layered Soil Foundation,” Geotextiles and Geomembranes, 19, 387–412.
     
     
123. Leshchinsky, D. and Vulova, C. (2001). “Numerical Investigation of the Effects of Geosynthetic Spacing on Failure Mechanisms in MSE Block Walls,” Geosynthetics International, 8(4), 343–365.
     
     
124. Boushehrian, J.H. and Hataf, N. (2003). “Experimental and Numerical Investigation of the Bearing Capacity of Model Circular and Ring Footings on Reinforced Sand,” Geotextiles and Geomembranes, 21, 241–256.
     
     
125. Skinner, G.D. and Rowe, R.K. (2005). “Design and Behavior of a Geosynthetic Reinforced Retaining Wall and Bridge Abutment on a Yielding Foundation,” Geotextiles and Geomembranes, 23, 234–260.
     
     
126. Ghazavi, M. and Lavasan, A.A. (2008). “Interface Effect of Shallow Foundations Constructed on Sand Reinforced with Geosynthetics,” Geotextiles and Geomembranes, 26, 404–415.
     
     
127. Alamshahi, S. and Hataf, N. (2009). “Bearing Capacity of Strip Footings on Sand Slopes Reinforced with Geogrid and Grid-Anchor,” Geotextiles and Geomembranes, 27, 217–226.
     
     
128. Chen, B., Luo, R., and Sun, J. (2011). “Time-Dependent Behaviors of Working Performance of Biaxial Reinforced Composite Foundation,” Institute of Electrical and Electronics Engineers Conference 2011, 915–920.
     
     
129. Karpurapu, R. and Bathurst, R.J. (1995). “Behavior of Geosynthetic Reinforced Soil Retaining Walls Using the Finite Element Method,” Computers and Geotechnics, 17(3), 279–299.
     
     
130. El Sawaaf, M. (2007). “Behavior of Strip Footing on Geogrid-Reinforced Sand Over a Soft Clay Slope,” Geotextiles and Geomembranes, 25(1), 50–60.
     
     
131. Ahmed, A., El-Tohami, A.M.K., and Marei, N.A. (2008). “Two-Dimensional Finite Element Analysis of Laboratory Embankment Model,” Geotechnical Engineering for Disaster Mitigation and Rehabilitation, 1,003–1,018.
     
     
132. Zidan, A.F. (2012). “Numerical Study of Behavior of Circular Footing on Geogrid-Reinforced Sand Under Static and Dynamic Loading,” Geotechnical and Geological Engineering, 30, 499–510.
     
     
133. Bhattacharjee, A. and Krishna, A.M. (2013). “Strain Behavior of Backfill Soil of Wrap Faced Reinforced Soil Walls: A Numerical Study,” Proceedings of the 18th Southeast Asian Geotechnical Conference, Advances in Geotechnical Infrastructure, Singapore.
     
     
134. Fakharian, K. and Attar, I.H. (2007). “Static and Seismic Numerical Modeling of Geosynthetic-Reinforced Soil Segmental Bridge Abutments,” Geosynthetics International, 14(4), 228–243.
     
     
135. Liu, H., Wang, X., and Song, E. (2009). “Long-Term Behavior of GRS Retaining Walls with Marginal Backfill Soils,” Geotextiles and Geomembranes, 27, 295–307.
     
     
136. Ling, H.I. and Liu, H. (2003). “Pressure Dependency and Densification Behavior of Sand Through a Generalized Plasticity Model,” Journal of Engineering Mechanics, 129(8),
     851–860.
     
     
137. Lade, P.V. (2005). “Overview of Constitutive Models for Soils,” Soil Constitutive Models: Evaluation, Selection and Calibration, ASCE Geotechnical Special Publication No. 128, 1–34.
     
     
138. Duncan, J.M., Byrne, P.M., Wong, K.S., and Mabry, P. (1980). Strength, Stress-Strain and Bulk Modulus Parameters for Finite Element Analyses of Stresses and Movements in Soil Masses, Report No. UCB/GT/80-01, University of California, Berkeley, Berkeley, CA.
     
     
139. Huang, B., Bathurst, R.J., and Hatami, K. (2009) “Numerical Study of Reinforced Soil Segmental Walls Using Three Different Constitutive Soil Models,” Journal of Geotechnical and Geoenvironmental Engineering, 135(10), 1,486–1,498.
     
     
140. Boscardin, M.D., Selig, E.T., Lin, R.S., and Yang, G.R. (1990). “Hyperbolic Parameters for Compacted Soils,” Journal of Geotechnical Engineering, 116(1), 88–104.
     
     
141. Kim, M.K. and Lade, P.V. (1988). “Single Hardening Constitutive Model for Frictional Materials I: Plastic Potential Function,” Computers and Geotechnics, 5(4), 307–324.
     
     
142. Lade, P.V. and Kim, M.K. (1988a). “Single Hardening Constitutive Model for Frictional Materials II: Yield Criterion and Plastic Work Contours,” Computers and Geotechnics, 6(1), 13–29.
     
     
143. Lade, P.V. and Kim, M.K. (1988b). “Single Hardening Constitutive Model for Frictional Materials III: Comparisons with Experimental Data,” Computers and Geotechnics, 6(1), 31–47.
     
     
144. Hallquist, J.O. and Whirley, R.G. (1989). Dyna3D User’s Manual: Nonlinear Dynamic Analysis of Structures in Three Dimensions, Rev. 5, Report UCID-19592, Lawrence Livermore National Laboratory University of California, Livermore, CA.
     
     
145. Drucker, D.C. and Prager, W. (1952). “Soil Mechanics and Plasticity Analysis or Limit Design,” Quarterly of Applied Mathematics, 10(2), 157–165.
     
     
146. DiMaggio, F.L. and Sandler, I.S. (1971). “Material Model for Granular Soils,” Journal of the Engineering Mechanics Division, 97(3), 935–950.
     
     
147. Huang, T.K. and Chen, W.F. (1990). “Simple Procedure for Determining Cap-Plasticity-Model Parameters,” Journal of Geotechnical Engineering, 116(3), 492–513.
     
     
148. Johnston, R.S. and Romstad, K.M. (1989). “Dilation and Boundary Effects in Large Scale Pull-Out Tests,” Proceedings of the 12th International Conference on Soil Mechanics and Foundation Engineering, 1,263–1,266, Rio de Janeiro, Brazil.
     
     
149. Otani, J., Ochiai, H., and Miyata, Y. (1994). “Bearing Capacity of Geogrid Reinforced Ground,” Fifth International Conference on Geotextiles, Geomembranes and Related Products, Singapore.
     
     
150. Otani, J., Ochiai, H., and Yamamoto, K. (1998). “Bearing Capacity Analysis of Reinforced Foundations on Cohesive Soil,” Geotextiles and Geomembrane, 16, 195–206.
     
     
151. Yamamoto, K. and Otani, J. (2002). “Bearing Capacity and Failure Mechanism of Reinforced Foundations Based on Rigid-Plastic Finite Element Formulation,” Geotextiles and Geomembranes, 20, 367–393.
     
     
152. Kurian, N.P., Beena, K.S., and Kumar, R.K. (1997). “Settlement of Reinforced Sand in Foundations,” Journal of Geotechnical and Geoenvironmental Engineering, 123(9), 818–827.
     
     
153. Dias, A.C. (2003). Numerical Analyses of Soil–Geosynthetic Interaction in Pull-out Tests, M.Sc. Thesis, University of Brasilia, Brasilia, Brazil.
     
     
154. Chen, Q. and Abu-Farsakh, M. (2011). “Numerical Analysis to Study the Scale Effect of Shallow Foundation on Reinforced Soils,” Proceedings of GeoFrontiers 2011, 595–604.
     
     
155. Raftari, M., Kassim, K.A., Rashid, A.S., and Moayedi, H. (2013). “Settlement of Shallow Foundations near Reinforced Slopes,” Electronic Journal of Geotechnical Engineering, 18, 797–808.
     
     
156. Chakraborty, D. and Kumar, J. (2014). “Bearing Capacity of Strip Foundations in Reinforced Soils,” International Journal of Geomechanics, 14(1), 45–58.
     
     
157. Ling, H.I., Cardany, C.P., Sun, L-X., and Hashimoto, H. (2000). “Finite Element Study of a Geosynthetic-Reinforced Soil Retaining Wall with Concrete-Block Facing,” Geosynthetics International, 7(3), 163–188.
     
     
158. Ling, H.I., Tatsuoka, F., and Tateyama, M. (1995). “Simulating Performance of GRS-RW by Finite-Element Procedure,” Journal of Geotechnical Engineering, 121(4), 330–340.
     
     
159. Sharma, K.G., Rao, G.V., and Raju, G.V.S.S. (1994). “Elasto-Plastic Analysis of a Reinforced Soil Wall by FEM,” Proceedings of the 8th International Conference on Computer Methods and Advances in Geomechanics, Morgantown, WV.
     
     
160. Lopes, M.L., Cardoso, A.S., and Yeo, K.C. (1994). “Modelling Performance of a Sloped Reinforced Soil Wall Using Creep Function,” Geotextiles and Geomembranes, 13, 181–197.
     
     
161. Liu, H. and Ling, H.I. (2007). “A Unified Elastoplastic-Viscoplastic Bounding Surface Model of Geosynthetics and its Applications to GRS-RW Analysis,” Journal of Engineering Mechanics, 133(7), 801–815.
     
     
162. Kongkitkul, W., Chantachot, T., and Tatsuoka, F. (2014). “Simulation of Geosynthetic Load-Strain-Time Behaviour by the Non-Linear Three-Component Model,” Geosynthetics International, 21(4), 244–255.
     
     
163. Abramento, M. (1993). Analysis and Measurement of Stresses in Planar Soil Reinforcements, Ph.D. Thesis, Massachusetts Institute of Technology, Boston, MA.
     
     
164. Bergado, D.T. and Chai, J.C. (1994). “Pullout Force/Displacement Relationship of Extensible Grid Reinforcement,” Geotextiles and Geomembranes, 13(5), 295–316.
     
     
165. Sobhi, S. and Wu, J.T.H. (1996). “An Interface Pullout Formula for Extensible Sheet Reinforcement,” Geosynthetics International, 3(5), 565–582.
     
     
166. Madhav, M.R., Gurung, N., and Iwao, Y. (1998). “A Theoretical Model for the Pull-Out Response of Geosynthetic Reinforcement,” Geosynthetics International, 5(4), 399–424.
     
     
167. Gurung, N. (2001). “1-D Analytical Solution for Extensible and Inextensible Soil/Rock Reinforcement in Pull-Out Tests,” Geotextiles and Geomembranes, 19(4), 195–212.
     
     
168. Gurung, N. and Iwao, Y. (1999). “Comparative Model Study of Geosynthetic Pull-Out Response,” Geosynthetics International, 6(1), 53–68.
     
     
169. Perkins, S.W. (2001). Numerical Modelling of Geosynthetic Reinforced Flexible Pavements, Report No. FHWA/MT-01-003/99160-2, Federal Highway Administration, Washington, DC.
     
     
170. Khedkar, M.S. and Mandal, J.N. (2009). “Pullout Behaviour of Cellular Reinforcements,” Geotextiles and Geomembranes, 27(4), 262–271.
     
     
171. Palmeira, E.M. (2009). “Soil-Geosynthetic Interaction: Modelling and Analysis,” Geotextiles and Geomembranes, 27, 368–390.
     
     
172. Santos, E.C.G. (2007). The Use of Construction Residues and Recycled Rubble in Reinforced Soil Structures. M.Sc. Thesis, University of Sao Paulo, Sao Carlos, Brazil.
     
     
173. Brown, S.F., Kwan, J., and Thom, N.H. (2007). “Identifying the Key Parameters that Influence Geogrid Reinforcement of Railway Ballast,” Geotextiles and Geomembranes, 25(6), 326–335.
     
     
174. Boyle, S.R. (1995). Deformation Prediction of Geosynthetic Reinforced Soil Retaining Walls, Ph.D. Dissertation, University of Washington, Seattle, WA.
     
     
175. Brown, B.S. and Poulos, H.G. (1981). “Analysis of Foundations on Reinforced Soil,” Proceedings of the 10th International Conference on Reinforced Soil, 3, 595–598, Stockholm, Sweden.
     
     
176. Andrawes, K.Z., Mcgown, A., Wilson-Fahmy, R.F., and Mashhour, M.M. (1982). “The Finite Element Method of Analysis Applied to Soil–Geotextile Systems,” Second International Conference of Geotextiles, 695–700, Las Vegas, NV.
     
     
177. Love, J.P., Burd, H.J., Milligan, G.W.E., and Houlsby, G.T. (1987). “Analytical and Model Studies of Reinforcement of a Layer of Granular Fill on a Soft Clay Subgrade,” Canadian Geotechnical Journal, 24, 611–622.
     
     
178. Rowe, R.K. and Soderman, K.L. (1987). “Stabilization of Very Soft Soils Using High Strength Geosynthetics: The Role of Finite Element Analyses,” Geotextiles and Geomembranes, 6, 53–80.
     
     
179. Matsui, T. and San, K.C. (1988). “Finite Element Stability Analysis Method for Reinforced Slopecutting,” International Geotechnical Symposium on Theory and Practice of Earth Reinforcement, 317–322, Fukoka, Japan.
     
     
180. Gens, A., Carol, I., and Alonso, E.E. (1988). “An Interface Element Formulation for the Analysis of Soil-Reinforcement Interaction,” Computer and Geotechnics, 7(1–2), 133–151.
     
     
181. Poran, C.J., Herrmann, L.R., and Romstad, K.M. (1989). “Finite Element Analysis of Footings on Geogrid-Reinforced Soil,” Proceedings of Geosynthetics, 231–242, San Diego, CA.
     
     
182. Hird, C.C., Pyrah, I.C., and Russell, D. (1990). “Finite Element Analysis of the Collapse of Reinforced Embankments on Soft Ground,” Geotechnique, 40(4), 633–640.
     
     
183. Burd, H.J. and Brocklehurst, C.J. (1990). “Finite Element Studies of the Mechanics of Reinforced Unpaved Roads,” Proceedings of the Fourth International Conference on Geotextiles, Geomembranes and Related Products, 217–221, The Hauge, Netherlands.
     
     
184. Wilson-Fahmy, R.F. and Koerner, R.M. (1993). “Finite Element Modeling of Soil Geogrid Interface with Application to the Behavior of Geogrids in Pullout Loading Conditions,” Geotextiles and Geomembranes, 12, 479–501.
     
     
185. Abdel-Baki, M.S. and Raymond, G.P. (1994). “Numerical Analysis of Geotextile Reinforced Soil Slabs,” Fifth International Conference on Geotextiles, Geomembranes and Related Products, Singapore.
     
     
186. Liu, H. and Won, M-S. (2009). “Long-Term Reinforcement Load of Geosynthetic-Reinforced Soil Retaining Walls,” Journal of Geotechnical and Geoenvironmental Engineering, 135(7), 875–889.
     
     
187. Duncan J.M. and Chang, C.Y. (1970). “Nonlinear Analysis of Stress and Strain in Soils,” Journal of Soil Mechanics and Foundations Divisions, 96(SM5), 1,629–1,654.
     
     
188. Christopher, B.R. (1993). Deformation Response and Wall Stiffness in Relation to Reinforced Soil Wall Design, Ph.D. Dissertation, Purdue University, West Lafayette, IN.
     
     
189. Itasca Consulting Group, Inc. (2001). Fast Lagrangian Analysis of Continua (FLAC), Itasca Consulting Group, Inc., Minneapolis, MN.
     
     
190. Hatami, K. and Bathurst, R.J. (2006b). “Parametric Analysis of Reinforced Soil Walls with Different Backfill Material Properties,” North American Geosynthetics Society 2006 Conference, 1–15, Las Vegas, NV.
     
     
191. Wu, J.T.H. (1992). “Geosynthetic-Reinforced Soil Retaining Walls,” International Symposium on Geosynthetic-Reinforced Soil Retaining Walls, Wu (Ed.), Denver, CO.
     
     
192. Murata, O., Tateyama, M., and Tatsuoka, F. (1991). “A Reinforcing Method for Earth Retaining Walls Using Short Reinforcing Members and a Continuous Rigid Facing,” Proceedings of the ASCE Geotechnical Engineering Congress, 935–946, New York, NY.
     
     
193. Miyatake, H., Ochiai, Y., Maruo, S., Nakane, A., Yamamoto, M., Terayama, T., Maejima, T., and Tsukada, Y. (1995). “Full-Scale Failure Experiments on Reinforced Earth Wall with Geotextiles (Part 2)—Facing with Concrete Blocks,” Proceedings of 30th Annual Conference of Geotechnical Engineering, 2,427–2,430, Kanazawa, Japan.
     
     
194. Tajiri, N., Sasaki, H., Nishimura, J., Ochiai, Y., and Dobashi, K. (1996). “Full-Scale Failure Experiments of Geotextile-Reinforced Soil Walls with Different Facings, Proceedings of the International Symposium on Earth Reinforcement, 1, 525–530, Fukuoka, Kyushu, Japan.
     
     
195. Helwany, S.M.B. and Wu, J.T.H. (1992). “A Generalized Creep Model for Geosynthetics,” Proceedings of the International Symposium on Earth Reinforcement Practice, 79–84, Fukuoka, Kyushu, Japan.
     
     
196. Liu, H. and Ling, H.I. (2005). “Constitutive Modeling of the Time Dependent Monotonic and Cyclic Behavior of Geosynthetics,” Geosynthetics and Geosynthetic-Engineered Soil Structures, 281–302, Columbia University Press, New York, NY.
     
     
197. Helwany, S.M.B. (1993). “Long-Term Interaction Between Soil and Geosynthetic in Geosynthetic-Reinforced Soil Structures,” Ph.D. Thesis, University of Colorado at Denver, Denver, CO.
     
     
198. Wu, J.H.T. and Helwany, S.M.B. (1996). “A Performance Test for Assessment of Long-Term Creep Behavior of Soil-Geosynthetic Composites,” Geosynthetics International, 3(1), 107–124.
     
     
199. Wu, J.T.H. and Adams, M.T. (2007). “Myth and Fact on Long-Term Creep of GRS Structures,” Geotechnical Special Publication No. 165, Geosynthetics in Reinforcement and Hydraulic Applications, Proceedings for Geo-Denver, Denver, CO.
     
     
200. Abu-Hejleh, N., Mohammed, K., and Alzamora, D.E. (2013). “Recommendations for the Use of Spread Footings on Soils to Support Highway Bridges,” Transportation Research Board 2013 Annual Meeting Compendium of Papers, Transportation Research Board, Washington, DC.
     
     
201. Cerato, A.B. and Luteneger, A.J. (2007). “Scale Effects of Shallow Bearing Capacity on Granular Material,” Journal of Geotechnical and Geoenvironmental Engineering, 133(10), 1,192–1,202.
     
     
202. Fakher, A. and Jones, C.J.F.P. (1996). “Discussion: Bearing Capacity of Rectangular Footings on Geogrid-Reinforced Sand,” Journal of Geotechnical Engineering, 122(4), 326–327.
     
     
203. Bolton, M.D. (1986). “The Strength and Dilatancy of Sands,” Géotechnique, 36(1), 65–78.