Federal Highway Administration Design Manual: Deep Mixing for Embankment and Foundation Support

REFERENCES

1. Mayrbaurl, R.M. and Camo, S. (2004). NCHRP Report 534: Guidelines for Inspection and Strength Evaluation of Suspension Bridge Parallel Wire Cables, National Cooperative Highway Research Program, Washington, DC.
2. Federal Highway Administration. (1986). Inspection of Fracture-Critical Bridges, Report No. FHWA-IP-86-26, U.S. Department of Transportation, Washington, DC.
3. Bieniek, M. and Betti, R. (1998). Cable Conditions for New York City Bridges, New York City Department of Transportation, New York, NY.
4. Cremer, N.D. (1989). Prohesion Compared to Salt Spray and Outdoors: Cyclic Methods of Accelerated Testing, Federation of Societies for Coatings Technology, Washington, DC.
5. Timmins, F.D. (1979). "Avoiding Paint Failures by Prohesion," Journal of Oil and Colour Chemists Association, 62(4), 131, Leicester, United Kingdom.
6. Haynes, G.S. (1995). Corrosion Tests and Standards: Application and Interpretation, 91-97, ASTM International, Conshohocken, PA.
7. Miyoshi, Y., Kitayama, M., Nishimura, K., and Naito, S. (1985). Cosmetic Corrosion Mechanism of Zinc and Zinc Alloy Coated Steel Sheet for Automobiles, SAE Technical Paper Series, SAE International, Washington, DC.
8. Standish, J.V., Whelan, G.W., and Roberts, T.R. (1983). "Corrosion Behavior of Galvanized and Cold Rolled Steels," Proceedings of the Society of Automotive Engineers, 1-12, Washington, DC.
9. Barton, S.C., Vermaas, G.W., Duby, P.F., West, A.C., and Betti, R. (2000). "Accelerated Corrosion and Embrittlement of High-Strength Bridge Wire," Journal of Materials in Civil Engineering, 12(1), 33-38.
10. Eiselstein, L.E. and Caligiuri, R.D. (1988). "Atmospheric Corrosion of the Suspension Cables on the Williamsburg Bridge," ASTM Special Technical Publication, 78-95, ASTM International, Conshohocken, PA.
11. Betti, R. (1996). "Environmental Deterioration Effects in Bridge Wires," Recent Advances in Bridge Engineering: Proceedings of the U.S.-Europe Workshop on Bridge Engineering, Barcelona, Spain.
12. Betti, R., West, A.C., Vermaas, G., and Cao, Y. (2005). "Corrosion and Embrittlement in High-Strength Wires of Suspension Bridge Cables," Journal of Bridge Engineering, 10(2), 151-162.
13. Cao, Y., Vermaas, G.W., Betti, R., West, A.C., and Duby, P.F. (2003). "Corrosion and Degradation of High-Strength Steel Bridge Wire," Corrosion, 59(6), 547-554.
14. Vermaas, G.W. (2001). Corrosion and Embrittlement of High-Strength Steel Bridge Wires, Thesis Dissertation, Columbia University, New York, NY.
15. Furuya, K., Kitagawa, M., Nakamura, S.-I., and Suzumura, K. (2000). "Corrosion Mechanism and Protection Methods for Suspension Bridge Cables," Structural Engineering International: Journal of the International Association for Bridge and Structural Engineering, 10(3), 189-193.
16. Nakamura, S. and Suzumura, K. (2005). "Corrosion Assessment of Bridge Cables," Proceedings of the 5th International Conference on Bridge Management, 28-36,
    Guildford, United Kingdom.
17. Nakamura, S.-I., Suzumura, K., and Tarui, T. (2004). "Mechanical Properties and Remaining Strength of Corroded Bridge Wires," Structural Engineering International: Journal of the International Association for Bridge and Structural Engineering, 14(1), 50-54.
18. Suzumura, K. and Nakamura, S.-I. (2004). "Environmental Factors Affecting Corrosion of Galvanized Steel Wires," Journal of Materials in Civil Engineering, 16(1), 1-7.
19. ASTM G85-11. (2011). "Standard Practice for Modified Salt Spray (Fog) Testing," Book of Standards Volume 03.02, ASTM International, Conshohocken, PA.
20. ASTM G1-03. (2011). "Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens," Book of Standards Volume 03.02, ASTM International, Conshohocken, PA.
21. Yang, L. and Sridhar, N. (2003). "Localized Corrosion Monitoring," ASM Handbook Volume 13A-Corrosion: Fundamentals, Testing, and Protection, ASM International, Materials Park, OH.
22. Klassen, R.D. and Roberge, P.R. (2008). "Zero Resistance Ammetry and Galvanic Sensors," Techniques for Corrosion Monitoring, Cambridge, England.